Panduit jacks, faceplates and cross-connect parts, page 4 of 7

OPTICOM SC SPLICE CASSETTE PRELOADED WITH 12 OS2 SC PIGTAILS (250UM), STANDARD IL

OPTICOM LC SPLICE CASSETTE PRELOADED WITH 12 OS2 LC PIGTAILS (250UM), STANDARD IL

OPTICOM LC SPLICE CASSETTE PRELOADED WITH 12-FIBER RIBBON OS2 PIGTAIL (250UM), STANDARD IL

OPTICOM LC SPLICE CASSETTE PRELOADED WITH 12 OS2 LC PIGTAILS (250UM), STANDARD IL

OPTICOM LC SPLICE CASSETTE PRELOADED WITH 12 OS2 LC RIBBON (250UM), STANDARD IL

OPTICOM SC SPLICE CASSETTE PRELOADED WITH 12 OM4 SC PIGTAILS (250UM), OPTIMIZED IL

OPTICOM LC SPLICE CASSETTE PRELOADED WITH 12 OM4 LC PIGTAILS (250UM), OPTIMIZED IL

OPTICOM LC SPLICE CASSETTE PRELOADED WITH 12-FIBER RIBBON OM4 PIGTAIL (250UM), OPTIMIZED IL

The fiber drawer is pre-loaded with 6 aqua duplex SC adapters with zirconia sleeves. It is black powdered coated steel and measures 1.73 inches H x 17.5 inches W x 12.1 inches D (44mm x 445mm x 308mm)

The fiber drawer is pre-loaded with 12 aqua duplex LC adapters with zirconia sleeves. It is black powdered coated steel and measures 1.73 inches H x 17.5 inches W x 12.1 inches D (44mm x 445mm x 308mm)

The fiber drawer is pre-loaded with 12 aqua duplex SC adapters with zirconia sleeves. It is black powdered coated steel and measures 1.73 inches H x 17.5 inches W x 12.1 inches D (44mm x 445mm x 308mm)

The fiber drawer is pre-loaded with 12 blue singlemode duplex LC adapters with zirconia sleeves. It is black powdered coated steel and measures 1.73 inches H x 17.5 inches W x 12.1 inches D (44mm x 445mm x 308mm)

The fiber drawer is pre-loaded with 24 aqua duplex LC adapters with zirconia sleeves. It is black powdered coated steel and measures 1.73 inches H x 17.5 inches W x 12.1 inches D (44mm x 445mm x 308mm)

The fiber drawer is pre-loaded with 24 blue duplex LC adapters with zirconia sleeves. It is black powdered coated steel and measures 1.73 inches H x 17.5 inches W x 12.1 inches D (44mm x 445mm x 308mm)

The IndustrialNet™ DIN Rail Fiber Optic Patch Panel provides fiber protection for terminated distribution style cabling. It can be mounted to a standard 35mm DIN rail and locked in place with adjustable latches, which are designed to allow it to mount on a flat surface. This DIN rail mount enclosure includes a PG21 cable entry gland which includes two inserts for use with a range of fiber cables and 6-32 × 3/8" Phillips head screws to mount faceplate to patch panel. For use with FAPs and OptiCom® Cassettes

The IndustrialNet™ DIN Rail Fiber Optic Patch Panel provides fiber protection for terminated distribution style cabling. It can be mounted to a standard 35mm DIN rail and locked in place with adjustable latches, which are designed to allow it to mount on a flat surface. This DIN rail mount enclosure includes a PG21 cable entry gland which includes two inserts for use with a range of fiber cables and 6-32 × 3/8" Phillips head screws to mount faceplate to patch panel. For use with FAPs.

The Opticom® Zero RU Fiber Adapter Panel Bracket is screw mounted.

The Opticom® Angled Zero RU Fiber Adapter Panel Bracket is adhesive and magnetic mounted.

OS2 HD Flex Cassette, 12-Port Duplex LC to (1) 24-fiber MPO, Universal Method A

HD FLEX CASSETTE OM5+ 1 MPO/6 DUP LC ULTRA IL METHOD A - PAIR FLIPPED

HD FLEX CASSETTE OM5+ 1 MPO/6 DUP LC ULTRA IL METHOD A

HD FLEX CASSETTE OM5+ 2 MPO/12 DUP LC ULTRA IL METHOD A - PAIR FLIPPED

HD FLEX CASSETTE OM5+ 2 MPO/12 DUP LC ULTRA IL METHOD A

HD FLEX CASSETTE OM5+ 2 MPO/12 DUP LC ULTRA IL METHOD B

HD FLEX CASSETTE; 1 MPO TO 6 DUPLEX LC; OM3 FIBER AND ULTRA LOW LOSS; UNIVERSAL

HD FLEX CASSETTE; 2 MPO TO 12 DUPLEX LC; OM3 FIBER AND ULTRA LOW LOSS; UNIVERSAL

HD FLEX CASSETTE; 2 MPO TO 12 DUPLEX LC; OM4 FIBER AND ULTRA LOW LOSS; UNIVERSAL

The High Fiber Count Breakout Kit splits cable into manageable groupings. Includes six expandable sleeve assemblies that snap into the kit. For use with cable diameters of 9-17mm (0.35-0.67 inches).

The High Fiber Count Breakout Kit splits cable into manageable groupings. Includes six expandable sleeve assemblies that snap into the kit. For use with cable diameters of 16-28mm (0.63-1.10 inches).

This HD Flex™ Fiber Adapter Panel features 6 MPO ports with type A adapters. It features key MPO up to key MPO down adapters and is black.

The HD Flex™ Fiber Adapter Panel features 6 MPO ports with type A adapters. It features key-up to key-down adapters and is black with lime green dust plugs.

The HD Flex™ Fiber Adapter Panel features 6 MPO ports with type B adapters. It features key-up to key-up adapters and is charcoal gray with lime green dust plugs.

The cradle is designed for the OptiCam® 2 tool, for the termination of LC OptiCam® Connectors. The cradle is black.

The LC duplexing clip is intended for use with field-polish connectors and pre-polished fiber assemblies. The clips are white, and come in a pack of 50.

The LC duplexing clip is intended for use with OptiCam®style pre-polished connectors. The clips are black, and come in a pack of 50.

The Fusion Splice LC-APC Fiber Optic Connector is a singlemode 9/125?m OS1/OS2 simplex fiber connector, intended for 900?m tight-buffered or 250?m loose-tube fiber installation. Field termination can be done in about two minutes on several common splice machine brands. The connector consists of a ferrule assembly with a bare fiber stub, a front housing, a rear housing with integral boot, and a splice protection sleeve.

The Fusion Splice LC-UPC Fiber Optic Connector is a singlemode 9/125?m OS1/OS2 simplex fiber connector, intended for 900?m tight-buffered or 250?m loose-tube fiber installation. Field termination can be done in about two minutes on several common splice machine brands. The connector consists of a ferrule assembly with a bare fiber stub, a front housing, a rear housing with integral boot, and a splice protection sleeve.

The HD Flex™ Fiber Enclosure is 1 RU and is configured with sliding front-access drawers to accept up to eighteen 4 port HD Flex™ cassettes or Fiber Adapter Panels for a maximum density of 144 fibers.

The HD Flex™ Fiber Enclosure is 1 RU and is configured with sliding front-access drawers to accept up to twelve 6 port HD Flex™ cassettes or Fiber Adapter Panels for a maximum density of 144 fibers

The HD Flex™ Fiber Panel is 1 RU and accepts up to eighteen 4-port HD Flex™ cassettes or Fiber Adapter Panels for a maximum density of 144 fibers.

The HD Flex™ Fiber Panel is 1 RU and accepts up to twelve 6 port HD Flex™ cassettes or Fiber Adapter Panels for a maximum density of 144 fibers.

The HD Flex™ Fiber Panel is 1 RU and accepts up to six 12-port HD Flex™ cassettes or Fiber Adapter Panels for a maximum density of 144 fibers.

The HD Flex™ Fiber Enclosure is 2 RU and is configured to accept 6 port HD Flex™ cassettes. The modular design accepts up to 12 HD Flex Fiber Cassettes per RU or Fiber Adapter Panels for a maximum density of 144 fibers per RU.

The HD Flex™ Fiber Panel is 2 RU and accepts up to 36 4-port HD Flex™ cassettes or Fiber Adapter Panels for a maximum density of 288 fibers.

The HD Flex™ Fiber Panel is 2 RU and accepts up to twenty-four 6 port HD Flex™ cassettes or Fiber Adapter Panels for a maximum density of 288 fibers.

The HD Flex™ Fiber Panel is 2 RU and accepts up to twelve 12-port HD Flex™ cassettes or Fiber Adapter Panels for a maximum density of 288 fibers.

The HD Flex™ Fiber Enclosure is 4 RU and is configured to accept 6 port HD Flex™ cassettes. The modular design accepts up to 12 HD Flex Fiber Cassettes per RU or Fiber Adapter Panels for a maximum density of 144 fibers per RU.

The HD Flex™ Fiber Panel is 4 RU and accepts up to 72 4-port HD Flex™ cassettes or Fiber Adapter Panels for a maximum density of 576 fibers.

The HD Flex™ Fiber Panel is 4 RU and accepts up to forty-eight 6 port HD Flex™ cassettes or Fiber Adapter Panels for a maximum density of 576 fibers.

The HD Flex™ Fiber Panel is 4 RU and accepts up to 24 12-port HD Flex™ cassettes or Fiber Adapter Panels for a maximum density of 576 fibers.

The HD Flex™ Rear Cable Manager is for use with the PEV12 vertical cable manager. It includes four 12-position transition managers with a clip. It is black.

The HD Flex™ Rear Cable Manager is for use with the PEV12 vertical cable manager. It includes four 18-position transition managers with a clip. It is black.

The HD Flex™ Universal Rear Cable Manager includes two 18-position transition managers with a screw mount bracket. It is black.

The HD Flex™ Universal Cable Management Bracket features adjustable mounting rails to help route/manage cables vertically or horizontally. The universal bracket supports cable slack as well as manage and route cables on the sides of racks, enclosures, or cabinets. This kit includes two mounting brackets and one strain relief bar.

The HD Flex™ Equipment Rail Kit contains 12 rails and 36 labels to allow 4-port cassettes to be used in HD Flex Enclosures that are pre-configured for 6-port or 12-port cassettes.

The HD Flex™ Panel Rail Kit contains 12 rails to allow 4-port cassettes to be used in HD Flex Panels that are pre-configured for 6-port or 12-port cassettes.

The HD Flex™ Equipment Rail Kit contains 6 rails and 12 labels to allow 6-port cassettes to be used in HD Flex Enclosures that are pre-configured for 4-port or 12-port cassettes.

The HD Flex™ Panel Rail Kit contains 6 rails to allow 6-port cassettes to be used in HD Flex Panels that are pre-configured for 4-port or 12-port cassettes.

The Fiber Ladder Rack Mount Enclosure serves as a consolidation point in overhead and underfloor systems. The enclosure includes three molded rings, a raw slack spool, 100 feet of grommet edging, and hook and loop cable ties. The enclosure is 1.7 inches h x 10.7 inches w x 8.0 inches d (43mm x 271mm x 203mm) and is black.

The 2 fiber outside plant armored central tube cable is OS2 and features 250µm fibers.

The 4 fiber outside plant armored central tube cable is OS2 and features 250µm fibers.

The 6 fiber outside plant armored central tube cable is OS2 and features 250µm fibers.

The 12 fiber outside plant armored central tube cable is OS2 and features 250µm fibers.

The 24 fiber outside plant armored central tube cable is OS2 and features 250µm fibers.

The threaded boot is intended for use with multimode OM3/OM4/OM5 OptiCam® connectors being installed on jacketed fiber optic cable that is from 1.6mm to 2.0mm in diameter. The boot is aqua, and comes in a pack of 10.

The threaded boot is intended for use with multimode OM1 OptiCam® connectors being installed on jacketed fiber optic cable that is from 1.6mm to 2.0mm in diameter. The boot is electric ivory, and comes in a pack of 10.

The threaded boot is intended for use with multimode OM3/OM4/OM5 OptiCam® connectors being installed on jacketed fiber optic cable that is 3.0mm in diameter. The boot is aqua, and comes in a pack of 10.

The threaded boot is intended for use with multimode OM2 OptiCam® connectors being installed on jacketed fiber optic cable that is 3.0mm in diameter. The boot is black, and comes in a pack of 10.

The threaded boot is intended for use with multimode OM1 OptiCam® connectors being installed on jacketed fiber optic cable that is 3.0mm in diameter. The boot is electric ivory, and comes in a pack of 10.

The Opticom® Fiber Drawer is designed to organize fiber distribution when space is limited. The drawer is completely modular and accommodates up to 4 QuickNet cassettes, FAP and FMP adapter panels as well as 48 fiber and copper cables. The fiber drawer is steel, black, has 4 ports and fits in a 1 RU footprint.

The Opticom® Fiber Drawer is designed to organize fiber distribution when space is limited. The drawer is completely modular and accommodates up to 8 QuickNet cassettes, FAP and FMP adapter panels as well as 96 fiber and copper cables. The fiber drawer is steel, black, has 8 ports and fits in a 2 RU footprint.

The Opticom® Multimedia Modular Panel snaps into all Opticom components. The six-port panel accepts up to six Mini-Com® Modules for UTP, fiber optic, and AV applications.

The Fusion Splice MPO Fiber Optic Connector is a singlemode 9/125?m OS1/OS2 fiber connector, intended for 3mm round jacketed fiber cable installation. Field termination can be done on several common splice machine brands. The connector is non-pinned ("Female"), standard IL, and is green.

The Fusion Splice MPO Fiber Optic Connector is a singlemode 9/125?m OS1/OS2 fiber connector, intended for unjacketed flat ribbon fiber cable installation. Field termination can be done on several common splice machine brands. The connector is non-pinned ("Female"), standard IL, and is green.

The Fusion Splice MPO Fiber Optic Connector is a multimode 50/125?m OM3/OM4/OM5 fiber connector, intended for unjacketed flat ribbon fiber cable installation. Field termination can be done on several common splice machine brands. The connector is non-pinned ("Female"), standard IL, and is aqua.

The Fusion Splice MPO Fiber Optic Connector is a singlemode 9/125?m OS1/OS2 fiber connector, intended for unjacketed flat ribbon fiber cable installation. Field termination can be done on several common splice machine brands. The connector is pinned ("Male"), standard IL, and is green.

The Opticom® fiber tray is designed to organize fiber distribution cabling. When used with the CFAPPBL1 patch panel, it accommodates up to 4 QuickNet cassettes or FAP adapter panels. It is black powder coated steel and features 4 ports in a 1 RU footprint. It measures 1.77 inches H x 19 inches W X 11.16 inches D (44.9mm x 482.2mm x 283.4mm).

The Opticom® fiber tray is designed to organize fiber distribution cabling. When used with the CFAPPBL2 patch panel, it accommodates up to 8 QuickNet cassettes or FAP adapter panels. It is black powder coated steel and features 8 ports in a 2 RU footprint. It measures 3.48 inches H x 19 inches W X 11.16 inches D (88.3mm x 482.6mm x 283.4mm).

The Opticom® fiber tray is designed to organize fiber distribution cabling. It features 24 ports and is black. This product is available in Japan only.

This Opticom® fiber tray accepts 4 FAP or FMP Panels and includes CFAPPBL1, a flat fiber patch panel. This product is available in Japan only and fits in a 1 RU footprint.

The 6 fiber indoor/outdoor central tube cable is OM3, Low Smoke Zero Halogen (LSZH) and features 250µm fibers.

The 12 fiber indoor/outdoor central tube cable is OM3, Low Smoke Zero Halogen (LSZH) and features 250µm fibers.

The 6 fiber indoor/outdoor central tube cable is OM4, Low Smoke Zero Halogen (LSZH) and features 250µm fibers.

The 12 fiber indoor/outdoor central tube cable is OM4, Low Smoke Zero Halogen (LSZH) and features 250µm fibers.

The 6 fiber indoor distribution cable is OM3, Low Smoke Zero Halogen (LSZH) rated and features 900µm buffered fibers.

The 12 fiber indoor distribution cable is OM3, Low Smoke Zero Halogen (LSZH) rated and features 900µm buffered fibers.

The 24 fiber indoor distribution cable is OM3, Low Smoke Zero Halogen (LSZH) rated and features 900µm buffered fibers.

The 6 fiber indoor distribution cable is OM4, Low Smoke Zero Halogen (LSZH) rated and features 900µm buffered fibers.

The 12 fiber indoor distribution cable is OM4, Low Smoke Zero Halogen (LSZH) rated and features 900µm buffered fibers.

The 24 fiber indoor distribution cable is OM4, Low Smoke Zero Halogen (LSZH) rated and features 900µm buffered fibers.

The 96 fiber indoor distribution cable is OM3, Riser (OFNR) rated and features 900µm buffered fibers.

The 6 fiber indoor/outdoor dielectic double jacketed (DDJ) is OM4 and Riser-Low Smoke Zero Halogen (OFNR-LS) rated, and features 250µm fibers.

The Dielectric Double Jacketed (DDJ) Fiber Cable is constructed of Kevlar re-enforced double jacketing. The material helps to eliminate the need for additional conduit or pathway installation and provides a smaller crush resistant pathway for improved design flexibility and lower installed cost. The DDJ fiber cable is Riser rated (OFNR) and compliant with Low Smoke Zero Halogen (LSZH) specifications. It is OM4 multimode and has a 12 fiber count.

The 24 fiber indoor/outdoor dielectic double jacketed (DDJ) is OM4 and Riser-Low Smoke Zero Halogen (OFNR-LS) rated, and features 250µm fibers.

The launch cord is designed for the OptiCam® 2 tool, for the termination of multimode LC OptiCam® Connectors. The cord is orange, with a metal 1.25mm adapter on the termination end and an LC connecter on the tool end. Packaged as one launch cord and five replacement ceramic alignment sleeves.

The launch cord is designed for the OptiCam® 2 tool, for the termination of singlemode LC OptiCam® Connectors. The cord is yellow, with a metal 1.25mm adapter on the termination end and an LC connecter on the tool end. Packaged as one launch cord and five replacement ceramic alignment sleeves.

The launch cord is designed for the OptiCam® 2 tool, for the termination of multimode SC and ST OptiCam® Connectors. The cord is orange, with a plastic 2.5mm adapter on the termination end and an LC connecter on the tool end. Packaged as one launch cord and five replacement ceramic alignment sleeves.

The 24 fiber indoor/outdoor stranded tube cable is OM3, Low Smoke Zero Halogen (LSZH) rated and features 250µm fibers.

The 48 fiber indoor/outdoor stranded tube cable is OM3, Low Smoke Zero Halogen (LSZH) rated and features 250µm fibers.

The 24 fiber indoor/outdoor stranded tube cable is OM4, Low Smoke Zero Halogen (LSZH) rated and features 250µm fibers.

The 48 fiber indoor/outdoor stranded tube cable is OM4, Low Smoke Zero Halogen (LSZH) rated and features 250µm fibers.

The fiber optic strip tool is intended for use in the fiber optic cable preparation process for termination of OptiCam® and single-fiber fusion splice connectors. The strip tool has five holes to enable stripping of 2.8-3.0mm outer jacket, 2.0mm-3.0mm loose tube, 2.0-2.4mm outer jacket, 900µm tight-buffered, and bare fiber cable. The tool is ergonimically designed, reducing the need for angling the tool during fiber strip.

TX6A™ UTP Field Term Plug, RJ45, Category 6A

The TX6A™ Category 6A UTP Field Term Plug terminates 4-pair, 22-26 AWG, 100 ohm, UTP twisted pair cable and is backwards compatible with Cat 6 and 5e. The plug utilizes TG style technology to optimize performance by maintaining cable pair geometry while eliminating conductor untwist. This plug simplifies installation of common devices such as cameras and wireless access points. The field term plug is black and includes 10 per package.

PROFINET Shielded Field Term RJ45 Plug is a simple-to-attach plug for field termination of 2-pair shielded twisted pair cable. Providing Category 5e performance the IndustrialNet™ PROFINET plug is terminates 2-pair, 22 AWG, 100 ohm shielded twisted pair cable compatible with PROFINET shielded systems.

PROFINET Shielded Field Term RJ45 Plug is a simple-to-attach plug for field termination of 2-pair shielded twisted pair cable. Providing Category 5e performance the IndustrialNet™ PROFINET plug is terminates 2-pair, 22 AWG, 100 ohm shielded twisted pair cable compatible with PROFINET shielded systems.

The in-line, connectorized fiber optic splitter is a small form factor passive device that fits in FPONE enclosures and uses a planar lightwave circuit to split one signal to sixteen signals for passive optical network applications. The splitter includes one SC-APC input on one side and four SC-APC outputs on the opposite side.

The in-line, connectorized fiber optic splitter is a small form factor passive device that fits in FPONE enclosures and uses a planar lightwave circuit to split one signal to sixteen signals for passive optical network applications. The splitter includes one SC-APC input on one side and eight SC-APC outputs on the opposite side.

The in-line, connectorized fiber optic splitter is a small form factor passive device that fits in FPONE enclosures and uses a planar lightwave circuit to split one signal to sixteen signals for passive optical network applications. The splitter includes one SC-APC input on one side and sixteen SC-APC outputs on the opposite side.

The in-line, connectorized fiber optic splitter is a small form factor passive device that fits in FPONE enclosures and uses a planar lightwave circuit to split one signal to sixteen signals for passive optical network applications. The splitter includes one SC-APC input on one side and thirty-two SC-APC outputs on the opposite side.

The wall mount enclosure is intended for use in passive optical LAN deployments. The small box is 233W x 200H x 63D mm in size, is IP55 rated, and has ports for 12 FASSCZAG-L adapters and splice protection sleeves.

The wall mount enclosure is intended for use in passive optical LAN deployments. The small box is 317W x 235H x 100D mm in size, is IP55 rated, and has ports for 12 FASSCZAG-L adapters and splice protection sleeves.

The wall mount enclosure is intended for use in passive optical LAN deployments. The small box is 420W x 350H x 110D mm in size, is IP55 rated, can use 2 x FPONEAP12 faceplates for 12 FASSCZAG-L adapters each, and has management for splice protection sleeves.

The wall mount enclosure is intended for use in passive optical LAN deployments. The small box is 485W x 400H x 135D mm in size, is IP55 rated, can use 4 x FPONEAP12 faceplates for 12 FASSCZAG-L adapters each, and has management for splice protection sleeves.

The in-line, splice-ready fiber optic splitter is a small form factor passive device that fits in FPONE enclosures and uses a planar lightwave circuit to split one signal to sixteen signals for passive optical network applications. The splitter includes one bare fiber input on one side and four bare fiber outputs on the opposite side.

The in-line, splice-ready fiber optic splitter is a small form factor passive device that fits in FPONE enclosures and uses a planar lightwave circuit to split one signal to sixteen signals for passive optical network applications. The splitter includes one bare fiber input on one side and eight bare fiber outputs on the opposite side.

The in-line, splice-ready fiber optic splitter is a small form factor passive device that fits in FPONE enclosures and uses a planar lightwave circuit to split one signal to sixteen signals for passive optical network applications. The splitter includes one bare fiber input on one side and sixteen bare fiber outputs on the opposite side.

The in-line, splice-ready fiber optic splitter is a small form factor passive device that fits in FPONE enclosures and uses a planar lightwave circuit to split one signal to sixteen signals for passive optical network applications. The splitter includes one bare fiber input on one side and thirty-two bare fiber outputs on the opposite side.

Shielded field term plug, 4-pair, 22-26 AWG

The TX6A Category 6A Shielded RJ45 Field Term Plug terminates 4-pair, 22-26 AWG, 100 ohm, shielded twisted pair cable and is backwards compatible with Cat 6 and 5e. The plug utilizes TG style technology to optimize performance by maintaining cable pair geometry while eliminating conductor untwist. This plug simplifies installation of common devices such as cameras and wireless access points.

UTP field term plug, 4-pair, 22 - 26 AWG

The TX6A Category 6A UTP Angled Up/Down RJ45 Field Term Plug terminates 4-pair, 22-26 AWG, 100 ohm, UTP twisted pair cable and is backwards compatible with Cat 6 and 5e. The angled cable exit allows a cable to route to the plug in tight spaces while maintaining proper bend radius. The plug utilizes TG style technology to optimize performance by maintaining cable pair geometry while eliminating conductor untwist. This plug simplifies installation of common devices such as cameras.

40G-10G Opticom® SFQ Cassette With OM3 Fiber, Standard Loss, 8-Fiber Total, Front LC Duplex Aqua Adapter, Rear Male MTP (Pins); Method A Connectivity

40G-10G Opticom® SFQ Cassette With OM4 Fiber, Standard Loss, 8-Fibers Total, Front LC Duplex Aqua Adapter, Rear Male MTP (Pins); Method A Connectivity

40G-10G Opticom® SFQ Cassette With OM4 Fiber, Optimized Low Loss, 8-Fibers Total, Front LC Duplex Aqua Adapter, Rear Male MTP (Pins); Method A Connectivity

40G-10G Opticom® SFQ Cassette With OM4 Fiber, Optimized Low Loss, 8-Fibers Total, Front LC Duplex Aqua Adapter, Rear Male MTP (Pins); Method B Connectivity

40-10G Opticom® SFQ Cassette With OS2 Fiber, Standard Loss, 8 Fiber Total, Front LC Duplex Blue Adapter, Rear Male MTP (Pins); Method A Connectivity

The QuickNet™ Bracket holds up to two QuickNet SFQ fiber cassettes or QuickNet pre-terminated copper cassettes without occupying rack space. The 0RU bracket mounts to any EIA-310-D compliant rail. It is black.

The QuickNet™ SFQ MPO Fiber Adapter Panel – Type A features 6 MPO key-up/key-down adapters. It snaps quickly into the rear of QuickNet™ Patch Panels for easy network deployment and quick migration. It is black and comes with installed dust caps.

The QuickNet™ SFQ MPO Fiber Adapter Panel – Type B features 6 MPO key-up/key-up adapters. It snaps quickly into the rear of QuickNet™ Patch Panels for easy network deployment and quick migration. It is charcoal gray and comes with installed dust caps.

The QuickNet™ SFQ MPO Fiber Adapter Panel – Type B features 8 MPO key-up/key-up adapters. It snaps quickly into the rear of QuickNet™ Patch Panels for easy network deployment and quick migration. It is charcoal gray and comes with installed dust caps.

SFQ CASSETTE OM5+ 1 MPO/6 DUP LC ULTRA IL METHOD A - PAIR FLIPPED

SFQ CASSETTE OM5+ 1 MPO/6 DUP LC ULTRA IL METHOD A

SFQ CASSETTE OM5+ 1 MPO/6 DUP LC ULTRA IL METHOD B1

SFQ CASSETTE OM5+ 1 MPO/6 DUP LC ULTRA IL METHOD B2

12-FIBER QN SFQ CASSETTE, ULTRA OM3 (50/125?M), DUPLEX LC TO MTP; UNIVERSAL

12-FIBER QN SFQ CASSETTE, STANDARD OM3 (50/125?M), DUPLEX LC TO MTP; UNIVERSAL

12-FIBER QN SFQ CASSETTE, ULTRA OM4 (50/125?M), DUPLEX LC TO MTP; UNIVERSAL

12-FIBER QN SFQ CASSETTE, STANDARD OM4 (50/125?M), DUPLEX LC TO MTP; UNIVERSAL

The Panduit® Opticom® Rack Mount Enclosure ensures network reliability by housing, organizing, managing and protecting up to 96 fiber optic cable terminations, splices, connectors and patch cords. The FRE1U is black, made of steel and features 4 FAP/cassette slots. It can accommodate 4 FAP adapter panels, 4 Opticom cassettes, 8 HD Flex cassettes or FOSM splice modules in a 1 RU footprint. Fibers are easily accessible through front and rear pullout drawers. 1.72"H x 17.60"W x 15.59"D (43.6mm x 447.0mm x 396.0mm)

The Panduit® Opticom® Rack Mount Enclosure ensures network reliability by housing, organizing, managing and protecting up to 192 fiber optic cable terminations, splices, connectors and patch cords. The FRE2U is black, made of steel and features 8 FAP/cassette slots. It can accommodate 8 FAP adapter panels, 8 Opticom cassettes, 16 HD Flex cassettes or FOSM splice modules in a 2 RU footprint. Fibers are easily accessible through front and rear pullout drawers. 3.46"H x 18.98"W x 15.63"D (88.0mm x 482.0mm x 397.0mm)

The Panduit® Opticom® Rack Mount Enclosure ensures network reliability by housing, organizing, managing and protecting up to 384 fiber optic cable terminations, splices, connectors and patch cords. The FRE4UBL is black, made of steel and uses up to 16 FAP adapter panels, 16 Opticom cassettes, 32 HD Flex cassettes or FOSM splice modules in a 4 RU footprint. Fibers are easily accessible through front pullout drawer and a removable back cover. 6.97"H x 19"W x 15.63"D (177.0mm x 482.0mm x 397.0mm)

FiberRunner Expansion Splice Kit 4x4

The Panduit® Opticom® Rack Mount Fiber Enclosure ensures network reliability by housing, organizing, managing and protecting up to 72 fiber optic cable terminations, splices, connectors and patch cords. The FRME1U is black, made of steel and features 3 FAP/cassette slots. It can accommodate 3 FAP or FMP adapter panels or FOSM splice modules in a 1 RU footprint. Fibers are easily accessible through front and rear pullout drawers. 1.74"H x 17.00"W x 14.20"D (44.2mm x 432.0mm x 361.0mm)

The Panduit® Opticom® Rack Mount Fiber Enclosure ensures network reliability by housing, organizing, managing and protecting fiber optic cable terminations, splices, connectors and patch cords. The FRME2U is black, made of steel and features 6 FAP/cassette slots. It can accommodate 6 FAP or FMP adapter panels or FOSM splice modules in a 2 RU footprint. Fibers are easily accessible through front and rear pullout drawers. 3.48"H x 17.00"W x 14.20"D (88.0mm x 432.0mm x 361.0mm)

The Panduit® Opticom® 4 RU Rack Mount Fiber Enclosure has integral fiber management and features 12 FAP/cassette slots. It can accommodate 12 FAPs for a maximum of 288 fibers. It ensures network reliability by housing, organizing, managing and protecting fiber optic cable, terminations, splices, connectors and patch cords. It is black powder coated steel.

The fiber optic splice enclosure houses, organizes, manages, and protects fusion splices for large fiber count cables. The HD Fusion splice enclosure is 4 RU and can hold up to 576 single fiber cables and 1728 ribbon fiber cables. It is black.

OM4+ Sig Core 2-fiber 1.6mm jacket, patch cord, LSZH LC push-pull to LC push-pull, Ultra IL., 1m

OM4+ Sig Core 2-fiber 1.6mm jacket, patch cord, LSZH LC push-pull to LC push-pull, Ultra IL., 2m

OM4+ Sig Core 2-fiber 1.6mm jacket, patch cord, LSZH LC push-pull to LC push-pull, Ultra IL., 3m

OM4+ Sig Core 2-fiber 1.6mm jacket, patch cord, LSZH LC push-pull to LC push-pull, Ultra IL., 4m

OM4+ Sig Core 2-fiber 1.6mm jacket, patch cord, LSZH LC push-pull to LC push-pull, Ultra IL., 5m

OM4+ Sig Core 2-fiber 1.6mm jacket, patch cord, LSZH LC push-pull to LC push-pull, Ultra IL., 6m

OM4+ Sig Core 2-fiber 1.6mm jacket, patch cord, LSZH LC push-pull to LC push-pull, Ultra IL., 7m

OM4+ Sig Core 2-fiber 1.6mm jacket, patch cord, LSZH LC push-pull to LC push-pull, Ultra IL., 8m

OM4+ Sig Core 2-fiber 1.6mm jacket, patch cord, LSZH LC push-pull to LC push-pull, Ultra IL., 9m

OM4+ Sig Core 2-fiber 1.6mm jacket, patch cord, LSZH LC push-pull to LC push-pull, Ultra IL., 10m

OM4+ Sig Core 2-fiber 1.6mm jacket, patch cord, LSZH LC push-pull to LC push-pull, Ultra IL., 15m

OM4+ Sig Core 2-fiber 1.6mm jacket, patch cord, LSZH LC push-pull to LC push-pull, Ultra IL., 20m

OM4+ Sig. Core 2-fiber, 1.6mm jacket patch cord, riser, LC push-pull to LC push-pull, Ultra IL, 1m

OM4+ Sig. Core 2-fiber, 1.6mm jacket patch cord, riser, LC push-pull to LC push-pull, Ultra IL, 2m

OM4+ Sig. Core 2-fiber, 1.6mm jacket patch cord, riser, LC push-pull to LC push-pull, Ultra IL, 3m

OM4+ Sig. Core 2-fiber, 1.6mm jacket patch cord, riser, LC push-pull to LC push-pull, Ultra IL, 4m

OM4+ Sig. Core 2-fiber, 1.6mm jacket patch cord, riser, LC push-pull to LC push-pull, Ultra IL, 5m

OM4+ Sig. Core 2-fiber, 1.6mm jacket patch cord, riser, LC push-pull to LC push-pull, Ultra IL, 6m

OM4+ Sig. Core 2-fiber, 1.6mm jacket patch cord, riser, LC push-pull to LC push-pull, Ultra IL, 7m

OM4+ Sig. Core 2-fiber, 1.6mm jacket patch cord, riser, LC push-pull to LC push-pull, Ultra IL, 8m

OM4+ Sig. Core 2-fiber, 1.6mm jacket patch cord, riser, LC push-pull to LC push-pull, Ultra IL, 9m

OM4+ Sig. Core 2-fiber, 1.6mm jacket patch cord, riser, LC push-pull to LC push-pull, Ultra IL, 10m

The threaded boot is intended for use with singlemode OS1/OS2 OptiCam® connectors being installed on jacketed fiber optic cable that is 3.0mm in diameter. The boot is blue, and comes in a pack of 10.

The cradle is designed for the OptiCam® 2 tool, for the termination of SC OptiCam® Connectors. The cradle is gray.

The 6 fiber indoor/outdoor central tube cable is OS2, Low Smoke Zero Halogen (LSZH) rated and features 250µm fibers.

The 12 fiber indoor/outdoor central tube cable is OS2, Low Smoke Zero Halogen (LSZH) rated and features 250µm fibers.

The Fusion Splice SC-APC Fiber Optic Connector is a singlemode 9/125?m OS1/OS2 simplex fiber connector, intended for 900?m tight-buffered or 250?m loose-tube fiber installation. Field termination can be done in about two minutes on several common splice machine brands. The connector consists of a ferrule assembly with a bare fiber stub, a front housing, a rear housing with integral boot, splice protection sleeve, and outer housing shroud.

The Fusion Splice SC-PC Fiber Optic Connector is a multimode 50/125?m OM3/OM4/OM5 simplex fiber connector, intended for 900?m tight-buffered or 250?m loose-tube fiber installation. Field termination can be done in about two minutes on several common splice machine brands. The connector consists of a ferrule assembly with a bare fiber stub, a front housing, a rear housing with integral boot, splice protection sleeve, and outer housing shroud.

The Fusion Splice SC-UPC Fiber Optic Connector is a singlemode 9/125?m OS1/OS2 simplex fiber connector, intended for 900?m tight-buffered or 250?m loose-tube fiber installation. Field termination can be done in about two minutes on several common splice machine brands. The connector consists of a ferrule assembly with a bare fiber stub, a front housing, a rear housing with integral boot, splice protection sleeve, and outer housing shroud.

The 6 fiber indoor distribution cable is OS2, Low Smoke Zero Halogen (LSZH) rated and features 900µm buffered fibers.

The 12 fiber indoor distribution cable is OS2, Low Smoke Zero Halogen (LSZH) rated and features 900µm buffered fibers.

The 24 fiber indoor distribution cable is OS2, Low Smoke Zero Halogen (LSZH) rated and features 900µm buffered fibers.

The 144 fiber indoor distribution cable is OS2, Plenum (OFNP) rated and features 900um buffered fibers.

The 72 fiber indoor distribution cable is OS2, Plenum (OFNP) rated and features 900um buffered fibers.

The 96 fiber indoor distribution cable is OS2, Plenum (OFNP) rated and features 900um buffered fibers.

The 144 fiber indoor distribution cable is OS2, Riser (OFNR) rated and features 900um buffered fibers.

The 96 fiber indoor distribution cable is OS2, Riser (OFNR) rated and features 900um buffered fibers.

The 2 fiber indoor distribution cable (G.657.A1) is OS2, Riser (OFNR) rated and features 900um buffered fibers.

The 2 fiber indoor/outdoor hybrid powered cable (G.657.A2/B2) is 2x12 AWG, Riser rated and features 900 buffered fibers.

The 12 fiber indoor/outdoor hybrid power cable (G.657.A2/B2) is 4x12 AWG, Riser rated and features 250µm fibers.

The 12 fiber indoor/outdoor hybrid power cable (G.657.A2/B2) is 6x12 AWG, Riser rated and features 250µm fibers.

The 1 fiber indoor distribution cable is OS2, Riser (OFNR) and features 900 buffered fibers.

The 6 fiber indoor/outdoor dielectic double jacketed (DDJ) is OS2 and Riser-Low Smoke Zero Halogen (OFNR-LS) rated, and features 250µm fibers.

The Dielectric Double Jacketed (DDJ) Fiber Cable is constructed of Kevlar re-enforced double jacketing. The material helps to eliminate the need for additional conduit or pathway installation and provides a smaller crush resistant pathway for improved design flexibility and lower installed cost. The DDJ fiber cable is Riser rated (OFNR) and compliant with Low Smoke Zero Halogen (LSZH) specifications. It is OS2 singlemode and has a 12 fiber count.

The 24 fiber indoor/outdoor dielectic double jacketed (DDJ) is OS2 and Riser-Low Smoke Zero Halogen (OFNR-LS) rated, and features 250µm fibers.

The 48 fiber indoor/outdoor dielectic double jacketed (DDJ) is OS2 and Riser-Low Smoke Zero Halogen (OFNR-LS) rated, and features 250µm fibers.

The 24 fiber indoor/outdoor stranded tube cable is OS2, Low Smoke Zero Halogen (LSZH) rated and features 250µm fibers.

The 48 fiber indoor/outdoor stranded tube cable is OS2, Low Smoke Zero Halogen (LSZH) rated and features 250µm fibers.

Holder for OmniSplice™ Fusion Splice Fiber Optic Connectors; designed for use on common Active Alignment splice machines from Sumitomo, Fujikura, Fiber Fox, and Swift.

The fiber optic cleave tool is intended for use in the cleaving of bare fiber optic cable to 7mm for the termination of OptiCam® connectors. The rotary blade, good for up to 60,000 cleaves, provides a clean, precision cleave while a waste receptacle collects fiber offcuts for safe disposal. The addition of batteries (not included) enables a cleave counter on the front of the tool. The guide plank can be swapped out for one that allows for a 10mm cleave for single-fiber fusion splice connectors.

The OptiCam® ST Fiber Optic Connector is a multimode 50/125?m OM3/OM4/OM5 duplex fiber connector, intended for 900-micron tight-buffered fiber installation. Field termination can be done in about two minutes using the OptiCam 2 Termination Tool. The pre-polished fiber endface eliminates time-consuming field polishing, reducing installation costs. The ST connector has a natural-colored body and backbone, with an aqua 900?m boot.

The fiber splice tray kit is for up to 48 discrete fiber fusion splices. It fits in Panduit FRMHSS-4RU and FRMHSST-4RU 4RU Splice Enclosures and FWMHSS*S-3456 and FWMHSS*S-6912 Wall Mount Fiber Splice Enclosures.

The fiber splice tray kit is for up to 12 ribbon fiber fusion splices (144 fibers). It fits in Panduit FRMHSS-4RU and FRMHSST-4RU 4RU Splice Enclosures and FWMHSS*S-3456 and FWMHSS*S-6912 Wall Mount Fiber Splice Enclosures.

The cradle is designed for the OptiCam® 2 tool, for the termination of ST OptiCam® Connectors. The cradle is gray with two moving components that are black.

The fiber splice enclosure shall house, organize, manage and protect fiber optic cables and splices. The enclosure meets UL 508A, as well as NEMA type 4/12, and IP66 rating. The enclosure shall be validated to accommodate a maximum of 360 fibers, using fifteen 24 fiber fusion splice modules (FOSM’s). To be included are fiber splice modules with approved mounting brackets, slack managers to accommodate up to three meters of slack, and grounding kit.

The fiber splice enclosure shall house, organize, manage and protect fiber optic cables and splices. The enclosure meets UL 508A, as well as NEMA type 4X/4/12, and IP66 rating. The enclosure shall be validated to accommodate a maximum of 360 fibers, using fifteen 24 fiber fusion splice modules (FOSM’s). To be included are fiber splice modules with approved mounting brackets, slack managers to accommodate up to three meters of slack, and grounding kit.

The Panduit® Opticom® Wall Mount Fiber Enclosure is designed to manage and organize fiber distribution when space is limited. The FWME2 features 2 FAP/cassette slots and can be used as an interconnect or cross-connect in any telecommunications room and can use any standard FAP or FMP series adapter panel. The FWME2 is compatible with most Panduit® Mini-Com®, ST, SC and Coax products. It features 2 FAP/cassette slots, is made with steel and comes in black. 10.1”H x 12.0"W x 2.3”D (259mm x 305mm x 59mm)

The Panduit® Opticom® Wall Mount Fiber Enclosure is designed to manage and organize fiber distribution when space is limited. The FWME4 features 4 FAP/cassette slots and can be used as an interconnect or cross-connect in any telecommunications room and can use any standard FAP or FMP series adapter panel. The FWME4 is compatible with most Panduit® Mini-Com®, ST, SC and Coax products. It features 4 FAP/cassette slots, is made with steel and comes in black. 16.11”H x 12.25"W x 3.52”D (409.2mm x 311mm x 89.4mm)

The HD Fusion Wall Mount Fiber Splice Enclosure houses, organizes, manages and protects cable to cable fusion splice connections. It can accommodate individual or ribbon fibers. This enclosure features split doors and supports up to 3,456 ribbon fibers.

The HD Fusion Wall Mount Fiber Splice Enclosure houses, organizes, manages and protects cable to cable fusion splice connections. It can accommodate individual or ribbon fibers. This enclosure features split doors and supports up to 6,912 ribbon fibers.

OM4 2 Fiber 3mm Jacket Patchcord Riser SC Duplex to SC Duplex Std. IL - 1 Meter

OM4 2 Fiber 3mm Jacket Patchcord Riser SC Duplex to SC Duplex Std. IL - 2 Meters

OM4 2 Fiber 3mm Jacket Patchcord Riser SC Duplex to SC Duplex Std. IL - 3 Meters

OM4 2 Fiber 3mm Jacket Patchcord Riser SC Duplex to SC Duplex Std. IL - 4 Meters

OM4 2 Fiber 3mm Jacket Patchcord Riser SC Duplex to SC Duplex Std. IL - 5 Meters

OM4 2 Fiber 3mm Jacket Patchcord Riser SC Duplex to SC Duplex Std. IL - 6 Meters

OM4 2 Fiber 3mm Jacket Patchcord Riser SC Duplex to SC Duplex Std. IL - 7 Meters

OM4 2 Fiber 3mm Jacket Patchcord Riser SC Duplex to SC Duplex Std. IL - 8 Meters

OM4 2 Fiber 3mm Jacket Patchcord Riser SC Duplex to SC Duplex Std. IL - 9 Meters

OM4 2 Fiber 3mm Jacket Patchcord Riser SC Duplex to SC Duplex Std. IL - 10 Meters

OM4 2 Fiber 3mm Jacket Patchcord Riser SC Duplex to SC Duplex Std. IL - 15 Meters

OM4 2 Fiber 3mm Jacket Patchcord Riser SC Duplex to SC Duplex Std. IL - 20 Meters

OM4 2 Fiber 3mm Jacket Patchcord Riser SC Duplex to SC Duplex Std. IL - 25 Meters

Heavy Duty Ground "E" Style Conn. 1/0 STR–250 kcmil (70–120mm²), 1/0 STR–250 kcmil (70–120mm²)

Tak-Ty hook & loop strip roll cable tie, 15' (4.6m) length, .33 (8.4mm) width, nylon loop, nylon hook, Erika Violet.

Tak-Ty hook & loop strip roll cable tie, 15' (4.6m) length, .33 (8.4mm) width, nylon loop, nylon hook, Lime Green.

Tak-Ty hook & loop strip roll cable tie, 15' (4.6m) length, .33 (8.4mm) width, nylon loop, nylon hook, Aqua.

Tak-Ty hook and loop strip roll cable tie, 15' (4.6m) length, .75 (19.1mm) width, nylon loop, nylon hook, Erika Violet

Tak-Ty hook and loop strip roll cable tie, 15' (4.6m) length, .75 (19.1mm) width, nylon loop, nylon hook, Lime Green

Tak-Ty hook and loop strip roll cable tie, 15' (4.6m) length, .75 (19.1mm) width, nylon loop, nylon hook, Aqua

Tak-Ty hook & loop strip roll cable tie, 75' (22.9m) length, .75 (19.1mm) width, nylon loop, nylon hook, Erika Violet

Tak-Ty hook & loop strip roll cable tie, 75' (22.9m) length, .75 (19.1mm) width, nylon loop, nylon hook, Lime Green

Tak-Ty hook & loop strip roll cable tie, 75' (22.9m) length, .75 (19.1mm) width, nylon loop, nylon hook, Aqua

Tak-Ty hook & loop cable loop tie, 8.0 (203mm) length, .50 (12.7mm) width, nylon loop, nylon hook, Erika Violet

Tak-Ty hook & loop cable loop tie, 8.0 (203mm) length, .50 (12.7mm) width, nylon loop, nylon hook, Lime Green

Tak-Ty hook & loop cable loop tie, 8.0 (203mm) length, .50 (12.7mm) width, nylon loop, nylon hook, Aqua.

Tak-Ty hook & loop cable loop tie, 12.0 (305mm) length, .50 (12.7mm) width, nylon loop, nylon hook, Erika Violet

Tak-Ty hook & loop cable loop tie, 12.0 (305mm) length, .50 (12.7mm) width, nylon loop, nylon hook, Lime Green

Tak-Ty hook & loop cable loop tie, 12.0 (305mm) length, .50 (12.7mm) width, nylon loop, nylon hook, Aqua

Copper Compression HTAP with code #2 - #6 AWG STR/SOL Run and Tap 1, code #8 - #14 AWG Tap 2 and Tap 3 or flex #2 - #8 AWG Run and Tap 1 and flex #8 - #14 AWG Tap 2 and Tap 3.

Copper Compression HTAP with code #6 - #14 AWG Run, code #6 - #14 AWG Tap 1 or flex #6 - #14 AWG Run and flex #6 - #14 AWG Tap1.

The HTCT250-2-1 Compression Connector Tap Used to tap into continuous conductors as a splice or pig tailing. Each HTAP terminates a wide range of conductor sizes and combinations of code and flex conductors Class G, H, I, and Diesel Locomotive to suit a variety of applications. The slotted design allows quick and easy assembly of conductor to HTAP using three Panduit 94V-0 cable ties. Meets cULus and CSA Certified for applications up to 600 V.

The HTCT250-250-1 Compression Connector Tap used to tap into continuous conductors as a splice or pig tailing. Each HTAP terminates a wide range of conductor sizes and combinations of code and flex conductors Class G, H, I, and Diesel Locomotive to suit a variety of applications. The slotted design allows quick and easy assembly of conductor to HTAP using three Panduit 94V-0 cable ties. Meets cULus and CSA Certified for applications up to 600 V.

The HTWC2-2-1 kit includes HTCT2-2-1 HTAP and CLRCVR2-1 clear cover and is used to tap into continuous copper conductors as a splice or pigtailing. Code conductor range is #2 – #6 AWG STR/SOL Run and Tap 1 or Flex conductors #2 – #8 AWG Run and Tap 1, code or flex #8 – #14 AWG Tap 2 and Tap 3.

The industrial automation bracket installs DIN-mountable equipment into a standard EIA 19 inch (483mm) rack or cabinet. This bracket is made of steel, is 4 RU, and is black.

The IndustrialNet™ Cat 5e UTP bulkhead 8-position connector with protective cap is ideal in manufacturing environments. The UTP bulkhead connector features a RJ45 jack. The bulkhead provides an IP67 rated seal that provides protection from dust and temporary immersion in water. It terminates to a 4-pair, 24 AWG, 100 ohm twisted pair cable and does not require a punchdown tool.

The IndustrialNet™ Cat 5e shielded bulkhead 8-position connector with protective cap is ideal in manufacturing environments. The shielded bulkhead connector features a RJ45 jack. The bulkhead provides an IP67 rated seal that provides protection from dust and temporary immersion in water. It terminates to a 4-pair, 24 AWG, 100 ohm twisted pair cable and does not require a punchdown tool.

The IndustrialNet™ Cat 6 UTP bulkhead 8-position connector with protective cap is ideal in manufacturing environments. The UTP bulkhead connector features a RJ45 jack. The bulkhead provides an IP67 rated seal that provides protection from dust and temporary immersion in water. It terminates to a 4-pair, 24 AWG, 100 ohm twisted pair cable and does not require a punchdown tool.

The IndustrialNet™ Cat 6 shielded bulkhead 8-position connector with protective cap is ideal in manufacturing environments. The shielded bulkhead connector features a RJ45 jack. The bulkhead provides an IP67 rated seal that provides protection from dust and temporary immersion in water. It terminates to a 4-pair, 24 AWG, 100 ohm twisted pair cable and does not require a punchdown tool.

The IndustrialNet™ Cat 6A UTP bulkhead 8-position connector with protective cap is ideal in manufacturing environments. The UTP bulkhead connector features a RJ45 jack. The bulkhead provides an IP67 rated seal that provides protection from dust and temporary immersion in water. It terminates to a 4-pair, 24 AWG, 100 ohm twisted pair cable and does not require a punchdown tool.

The IndustrialNet™ Cat 6A shielded bulkhead 8-position connector with protective cap is ideal in manufacturing environments. The shielded bulkhead connector features a RJ45 jack. The bulkhead provides an IP67 rated seal that provides protection from dust and temporary immersion in water. It terminates to a 4-pair, 24 AWG, 100 ohm twisted pair cable and does not require a punchdown tool.

The IndustrialNet™ Cat 5e UTP bulkhead RJ45 coupler module with protective cap is ideal in manufacturing environments. The bulkhead provides an IP67 rated seal that provides protection from dust and temporary immersion in water.

The Category 5e IndustrialNet™ Shielded Coupler Bulkhead RJ45 jack and plug incorporates an IP67 rated seal and is designed to provide protection from dust and temporary immersion in water. Termination to a 4-pair, 24 AWG, 100 Ohm twisted pair cable does not require the use of a punch down tool. The protective cap ensures IP67 protection of the connector and plug in the unmated condition. The shielded coupler bulkhead is black.

The IndustrialNet™ Cat 6 UTP bulkhead RJ45 coupler module with protective cap is ideal in manufacturing environments. The bulkhead provides an IP67 rated seal that provides protection from dust and temporary immersion in water.

The Category 6A IndustrialNet™ Shielded Coupler Bulkhead RJ45 jack and plug incorporates an IP67 rated seal and is designed to provide protection from dust and temporary immersion in water. Termination to a 4-pair, 24 AWG, 100 Ohm twisted pair cable does not require the use of a punch down tool. The protective cap ensures IP67 protection of the connector and plug in the unmated condition. The shielded coupler bulkhead is black.

The IndustrialNet™ USB Female 2.0 bulkhead connector, with protective cap, is ideal in manufacturing environments. The bulkhead provides an IP67 rated seal that provides protection from dust and temporary immersion in water.

The IndustrialNet™ Vertical faceplate is constructed of 100% stainless steel. The faceplate accepts one IndustrialNet Bulkhead connector or adapter. The faceplate is impact resistant for light industrial environments, and the rear gasket provides a tight seal.

The IndustrialNet™ double gang Vertical faceplate is constructed of 100% stainless steel. The faceplate accepts two IndustrialNet Bulkhead connectors or adapters. The faceplate is impact resistant for light industrial environments, and the rear gasket provides a tight seal.

9-pin female/female D-subminiature coupler in 1/3-size insert for use with IndustrialNet™ Data Access Port.

The IndustrialNet™ M12 D-Code to RJ45 coupler adapter is ideal for use in manufacturing as well as other industrial environments. The housing for the M12 D-Code to RJ45 coupler adapter is constructed of Nylon GF. The adapter has an ingress protection rating of IP20 on the RJ45 side and IP68 on the M12 side when mated. The M12 D-code to RJ45 coupler adapter offers an extended temperature range as required for more demanding applications. This adapter is easily installable without special tools.

The IndustrialNet™ M12 X-Code to RJ45 Coupler Adapter is ideal for use in manufacturing as well as other industrial environments. The adapter is available in straight and angled versions. The adapter has an ingress protection rating of IP20 on the RJ45 side and IP68 on the M12 side when mated.

The IndustrialNet™ M12 X-Code Female to RJ45 Coupler Adapter is ideal for use in manufacturing as well as other industrial environments. The adapter is available in straight and angled versions. The adapter has an ingress protection rating of IP20 on the RJ45 side and IP68 on the M12 side when mated.

IndustrialNet™ Copper Cable, Industrial Ethernet, Category 6A, 4-pair, 24/7 AWG, SF/UTP, CMX/CM, 600V AWM, High flex, Oil and sunlight resistant, Abrasion and weld splatter resistant, TPE jacket, Black, 1000ft/305m reel

The Cat 6A SF/UTP copper cable is constructed of 26/7 AWG stranded copper conductors with a High Density Polyethylene (HDPE) insulation. The twisted pair copper conductors are wrapped with a foam polypropylene tape to form a core. All four pairs are surrounded by an overall braided shield and metallic foil and covered with a thermoplastic elastomer (TPE) jacket. The cable is supplied 305 meters (1,000 feet) to a reel and teal jacketing.

The M12 D-Code modular plug is field terminable for use with industrial grade, 26/7 - 22/7 AWG stranded, Cat 5e UTP or shielded copper cable. The terminable plug is constructed of a zinc cast housing with a 360° shield. The plug has an ingress protection rating of IP65/IP67 and offers an extended temperature range as required for more demanding applications. It is easily attachable without any special tools and is capable of termination to a 2-pair stranded or solid twisted-pair copper cable.

The M12 X-Code modular plug is field terminable for use with industrial grade, 26/7 - 22/7 AWG stranded, Cat 6A, UTP or shielded copper cable. This plug is constructed of a zinc cast housing with a 360° shield. The plug has an ingress protection rating of IP65/IP67 and offers an extended temperature range as required for more demanding applications. It is easily attachable without any special tools and is capable of termination to a 2-pair stranded or solid twisted-pair copper cable.

Patch Cord, IndustrialNET, Cat6A, Shielded, 600V, RJ45 plug to RJ45 plug, Black, 0.3 meter

Patch Cord, IndustrialNET, Cat6A, Shielded, 600V, RJ45 plug to RJ45 plug, Black, 0.6 meter

The IndustrialNet™ Cat 6A Shielded Patch Cord is constructed of industrial grade, 26 AWG, SF/UTP, twisted pair, stranded, CMR cable with industrial bulkhead modular plugs with black strain relief boots. It is designed to support high-flex applications and is rated for 600 V panel or on-machine applications where space is shared with high voltage power cables. The patch cord is 0.6 meters in length and teal.

Patch Cord, IndustrialNET, Cat6A, Shielded, 600V, RJ45 plug to RJ45 plug, Black, 1.5meter

Patch Cord, IndustrialNET, Cat6A, Shielded, 600V, RJ45 plug to RJ45 plug, Teal, 1.5 meter

The IndustrialNet™ Cat 6A Shielded Patch Cord is constructed of industrial grade, 26 AWG, SF/UTP, twisted pair, stranded, CMR cable with industrial bulkhead modular plugs with black strain relief boots. It is designed to support high-flex applications and is rated for 600 V panel or on-machine applications where space is shared with high voltage power cables. The patch cord is 10 meters in length and black.

The IndustrialNet™ Cat 6A Shielded Patch Cord is constructed of industrial grade, 26 AWG, SF/UTP, twisted pair, stranded, CMR cable with industrial bulkhead modular plugs with black strain relief boots. It is designed to support high-flex applications and is rated for 600 V panel or on-machine applications where space is shared with high voltage power cables. The patch cord is 2.5 meters in length and teal.

The IndustrialNet™ Cat 6A Shielded Patch Cord is constructed of industrial grade, 26 AWG, SF/UTP, twisted pair, stranded, CMR cable with industrial bulkhead modular plugs with black strain relief boots. It is designed to support high-flex applications and is rated for 600 V panel or on-machine applications where space is shared with high voltage power cables. The patch cord is 10 meters in length and black.

The IndustrialNet™ Cat 6A Shielded Patch Cord is constructed of industrial grade, 26 AWG, SF/UTP, twisted pair, stranded, CMR cable with industrial bulkhead modular plugs with black strain relief boots. It is designed to support high-flex applications and is rated for 600 V panel or on-machine applications where space is shared with high voltage power cables. The patch cord is 2 meters in length and teal.

Patch Cord, IndustrialNET, Cat6A, Shielded, 600V, RJ45 plug to RJ45 plug, Black, 3.5 meter

Patch Cord, IndustrialNET, Cat6A, Shielded, 600V, RJ45 plug to RJ45 plug, Teal, 3.5 meter

The IndustrialNet™ Cat 6A Shielded Patch Cord is constructed of industrial grade, 26 AWG, SF/UTP, twisted pair, stranded, CMR cable with industrial bulkhead modular plugs with black strain relief boots. It is designed to support high-flex applications and is rated for 600 V panel or on-machine applications where space is shared with high voltage power cables. The patch cord is 10 meters in length and black.

The IndustrialNet™ Cat 6A Shielded Patch Cord is constructed of industrial grade, 26 AWG, SF/UTP, twisted pair, stranded, CMR cable with industrial bulkhead modular plugs with black strain relief boots. It is designed to support high-flex applications and is rated for 600 V panel or on-machine applications where space is shared with high voltage power cables. The patch cord is 3 meters in length and teal.

Patch Cord, IndustrialNET, Cat6A, Shielded, 600V, RJ45 plug to RJ45 plug, Black,4.5 meter

The IndustrialNet™ Cat 6A Shielded Patch Cord is constructed of industrial grade, 26 AWG, SF/UTP, twisted pair, stranded, CMR cable with industrial bulkhead modular plugs with black strain relief boots. It is designed to support high-flex applications and is rated for 600 V panel or on-machine applications where space is shared with high voltage power cables. The patch cord is 4.5 meters in length and teal.

Patch Cord, IndustrialNET, Cat6A, Shielded, 600V, RJ45 plug to RJ45 plug, Black, 4 meter

The IndustrialNet™ Cat 6A Shielded Patch Cord is constructed of industrial grade, 26 AWG, SF/UTP, twisted pair, stranded, CMR cable with industrial bulkhead modular plugs with black strain relief boots. It is designed to support high-flex applications and is rated for 600 V panel or on-machine applications where space is shared with high voltage power cables. The patch cord is 4 meters in length and teal.

The IndustrialNet™ Cat 6A Shielded Patch Cord is constructed of industrial grade, 26 AWG, SF/UTP, twisted pair, stranded, CMR cable with industrial bulkhead modular plugs with black strain relief boots. It is designed to support high-flex applications and is rated for 600 V panel or on-machine applications where space is shared with high voltage power cables. The patch cord is 10 meters in length and black.

The IndustrialNet™ Cat 6A Shielded Patch Cord is constructed of industrial grade, 26 AWG, SF/UTP, twisted pair, stranded, CMR cable with industrial bulkhead modular plugs with black strain relief boots. It is designed to support high-flex applications and is rated for 600 V panel or on-machine applications where space is shared with high voltage power cables. The patch cord is 5 meters in length and teal.

Patch Cord, IndustrialNET, Cat6A, Shielded, 600V, RJ45 plug to RJ45 plug, Black, 7 meter

Patch Cord, IndustrialNET, Cat6A, Shielded, 600V, RJ45 plug to RJ45 plug, Teal, 7 meter

The IndustrialNet™ Cat 6A Shielded Patch Cord is constructed of industrial grade, 26 AWG, SF/UTP, twisted pair, stranded, CMR cable with industrial bulkhead modular plugs with black strain relief boots. It is designed to support high-flex applications and is rated for 600 V panel or on-machine applications where space is shared with high voltage power cables. The patch cord is 10 meters in length and black.

The IndustrialNet™ Cat 6A Shielded Patch Cord is constructed of industrial grade, 26 AWG, SF/UTP, twisted pair, stranded, CMR cable with industrial bulkhead modular plugs with black strain relief boots. It is designed to support high-flex applications and is rated for 600 V panel or on-machine applications where space is shared with high voltage power cables. The patch cord is 10 meters in length and teal.

The IndustrialNet™ Cat 6A Shielded Patch Cord is constructed of industrial grade, 26 AWG, SF/UTP, twisted pair, stranded, CMR cable with industrial bulkhead modular plugs with black strain relief boots. It is designed to support high-flex applications and is rated for 600 V panel or on-machine applications where space is shared with high voltage power cables. The patch cord is 10 meters in length and black.

The IndustrialNet™ Cat 6A Shielded Patch Cord is constructed of industrial grade, 26 AWG, SF/UTP, twisted pair, stranded, CMR cable with industrial bulkhead modular plugs with black strain relief boots. It is designed to support high-flex applications and is rated for 600 V panel or on-machine applications where space is shared with high voltage power cables. The patch cord is 15 meters in length and teal.

Patch Cord, IndustrialNET, Cat6A, Shielded, 600V, RJ45 plug to RJ45 plug, Teal, 20 meter

Copper Cable, Industrial, Cat6A 4-pair, 24/7 AWG Stranded, S/FTP, PUR, 500m reel

IndustrialNet™ Copper Cable, Industrial Ethernet, Category 6A, 4-pair, 23/1 AWG, U/UTP, CMX/CMR, 600V AWM, Oil and sunlight resistant, PVC jacket, Black, 1000ft/305m reel

The keystone Cat 6A shielded RJ45 jack module is designed to terminate 4-pair, 22-24 AWG shielded twisted pair cable. Shielded jack modules use a forward motion termination method to optimize performance. The die-cast housing provides a robust design to protect against physical and electromagnetic damage. The jack module is silver.

The keystone Cat 6A shielded RJ45 jack module is designed to terminate 4-pair, 22-24 AWG shielded twisted pair cable. Shielded jack modules use a forward motion termination method to optimize performance. The die-cast housing provides a robust design to protect against physical and electromagnetic damage. The jack module is silver with a black front.

The keystone Cat 6A shielded RJ45 jack module is designed to terminate 4-pair, 22-24 AWG shielded twisted pair cable. Shielded jack modules use a forward motion termination method to optimize performance. The die-cast housing provides a robust design to protect against physical and electromagnetic damage. The jack module is silver with a blue front.

The Flashlight Kit for patch cord removal tool is a small flashlight that mounts directly to the PCRT1 tool.

The keystone single gang wall phone plate is made of stainless steel and is compatible with standard keystone modules. The plate includes mounting studs for standard wall mount telephones.

The LC Transceiver Dust Cap helps manage the unused LC connectors and assists with cable management until those transceivers are installed.

Panduit™ G5 PDU Yost Serial Dongle

This PDU Universal Mounting Bracket includes a set of two brackets.