Panduit jacks, faceplates and cross-connect parts, page 3 of 7

Module supplied with 50 ohm industry standard BNC coupler, Off White.

Module supplied with 50 ohm industry standard BNC coupler, White.

The Mini-Com® Blank Module reserves a one module space for future use in Mini-Com Patch Panels, Faceplates, and Surface Mount Boxes. The blank is black.

The Mini-Com® Blank Module reserves a one module space for future use in Mini-Com Patch Panels, Faceplates, and Surface Mount Boxes. The blank is electric ivory.

The Mini-Com® Blank Module reserves a one module space for future use in Mini-Com Patch Panels, Faceplates, and Surface Mount Boxes. The blank is international gray.

The Mini-Com® Blank Module reserves a one module space for future use in Mini-Com Patch Panels, Faceplates, and Surface Mount Boxes. The blank is off white.

The Bend Radius Control Clip provides 0.5 in. bend radius for patch cords when transitioning to and from products such as patch panels and horizontal cable managers. The clip can be installed directly over the patch panel at any rack unit in the rack or cabinet. The clip is 1RU, 3 in. deep and black in color.

The Bend Radius Control Clip provides 0.5 in. bend radius for patch cords when transitioning to and from products such as patch panels and horizontal cable managers. The clip can be installed directly over the patch panel at any rack unit in the rack or cabinet. The clip is 1 RU, 5 in. deep and black in color.

The Bend Radius Control Finger Section provides support and bend radius for patch cords when transitioning to and from active equipment. The finger section can be installed directly over the active equipment at any rack unit in the rack or cabinet. The clip is 5 RU, 3 in. deep and black in color.

The Bend Radius Control Finger Section provides support and bend radius for patch cords when transitioning to and from active equipment. The finger section can be installed directly over the active equipment at any rack unit in the rack or cabinet. The clip is 5 RU, 5 in. deep and black in color.

The Mini-Com® Blank Module reserves a one module space for future use in Mini-Com Patch Panels, Faceplates, and Surface Mount Boxes. The blank is white.

2-position module supplied with one 15-pin DB connector mounted to a printed circuit board, terminates on site, black.

2-position module supplied with one 15-pin DB connector mounted to a printed circuit board, terminates on site, electric ivory.

2-position module supplied with one 15-pin DB connector mounted to a printed circuit board, terminates on site, international gray.

2-position module supplied with one 15-pin DB connector mounted to a printed circuit board, terminates on site, off white.

2-position module supplied with one 15-pin DB connector mounted to a printed circuit board, terminates on site, white.

The Open-Access™ Individual D-Ring can be used as a replacement D-Ring for the horizontal manager, or it can be used with many other cable management accessories, such as various tie-off panels and brackets. The innovative, plastic design allows for easy moves, adds and changes with bundles of cable. D-Ring is 1RU, 3 in. deep and black in color.

The Open-Access™ Individual D-Ring can be used as a replacement D-Ring for the horizontal manager, or it can be used with many other cable management accessories, such as various tie-off panels and brackets. The innovative, plastic design allows for easy moves, adds and changes with bundles of cable. D-Ring is 1RU, 3 in. deep and black in color. Pack of 100 D-Rings.

The Open-Access™ Individual D-Ring can be used as a replacement D-Ring for the horizontal manager, or it can be used with many other cable management accessories, such as various tie-off panels and brackets. The innovative, plastic design allows for easy moves, adds and changes with bundles of cable. D-Ring is 1RU, 5 in. deep and black in color.

Module supplied with 3.0 GHz industry standard F-Type coupler, arctic white.

Module supplied with 3.0 GHz industry standard F-Type coupler, black.

Module supplied with 3.0 GHz industry standard F-Type coupler, electric ivory.

Module supplied with 3.0 GHz industry standard F-Type coupler, Electric Ivory, 100 Pack.

Module supplied with 3.0 GHz industry standard F-Type coupler, international gray.

Module supplied with 3.0 GHz industry standard F-type coupler, off white.

Module supplied with 3.0 GHz industry standard F-type coupler, Off White, 100 Pack.

Module supplied with 75 ohm self-terminating F-type coupler, arctic white.

Module supplied with 75 ohm self-terminating F-type coupler, black.

Module supplied with 75 ohm self-terminating F-type coupler, electric ivory.

Module supplied with 75 ohm self-terminating F-type coupler, international gray.

Module supplied with 75 ohm self-terminating F-type coupler, off white.

Module supplied with 75 ohm self-terminating F-type coupler, white.

This F-Type Coupler Module is a coaxial coupler used to connect cable to video, CATV, and security cameras. This F-Type Coupler Module is supplied with a 3 GHz standard F-type 1-position

Module supplied with 3.0 GHz industry standard F-Type coupler, White.

This Mini-Com® HDMI Coupler is HDMI 2.0. It is a Type A female to female coupler, two position module. It is arctic white.

This Mini-Com® HDMI Coupler is HDMI 2.0. It is a Type A female to female coupler, two position module. It is black.

Mini-Com Dual Module Space HDMI 2.0 Type "A" Female To Female Coupler, Electric Ivory.

Mini-Com Dual Module Space HDMI 2.0 Type "A" Female To Female Coupler, Intl Gray

This Mini-Com® HDMI Coupler is HDMI 2.0. It is a Type A female to female coupler, two position module. It is off white.

Mini-Com® HDMI 2.0 Coupler Module with pigtail, Black.

Mini-Com® HDMI 2.0 Coupler Module with pigtail, Electric Ivory.

Mini-Com® HDMI 2.0 Coupler Module with pigtail, International Gray.

Mini-Com® HDMI 2.0 Coupler Module with pigtail, Off White.

Mini-Com® HDMI 2.0 Coupler Module with pigtail, White.

This Mini-Com® HDMI Coupler is HDMI 2.0. It is a Type A female to female coupler, two position module. It is white.

The Lower Trough attaches to the bottom of a rack where it supports and contains cable with proper bend radius. It is compatible with any standard EIA 19 inch (483mm) rack or cabinet. The trough is 4RU in height, 4.5 in. deep and is black in color.

The Mini-Com® adapter snaps into 0.827 x 0.827 (21mm x 21mm) opening and accepts one Mini-Com® module. Panel thickness should be 0.016 to 0.056 (1.17mm to 1.42mm). The adapter is black.

The Mini-Com® adapter snaps into 0.827 x 0.827 (21mm x 21mm) opening and accepts one Mini-Com® module. Panel thickness should be 0.016 to 0.056 (1.17mm to 1.42mm). The adapter is white.

This Mini-Com® USB Coupler is USB 2.0. It is a female A to female A one position insert coupler module. It is arctic white.

This Mini-Com® USB Coupler is USB 2.0. It is a female A to female A one position insert coupler module. It is black.

Mini-Com® USB 2.0 female A to female A coupler module, Electric Ivory.

Mini-Com® USB 2.0 female A to female A coupler module, Intl Gray.

This Mini-Com® USB Coupler is USB 2.0. It is a female A to female A one position insert coupler module. It is off white.

This Mini-Com® USB Coupler is USB 2.0. It is a female A to female A one position insert coupler module. It is white.

The Net-Direct™ Air Inlet Duct provides cold airflow directly into Cisco Catalyst 4900M switch intakes from in-line and the side. Not only does it require no energy to operate, but it also reduces fan power consumption by up to 250W, improving energy efficiency and reliability for increased cost savings. 2RU, Black, 2pc - No blanking panels.

The Net-Direct™ Air Inlet Duct provides cold airflow directly into Cisco Catalyst 6504-E switch intakes from above, below and the side. Not only does it require no energy to operate, but it also reduces fan power consumption by up to 250W, improving energy efficiency and reliability for increased cost savings. 2RU, Black, 3pc - No blanking panels.

The Net-Direct™ Air Inlet Duct provides cold airflow directly into Cisco MDS 9506 switch intakes from above, below and the side. Not only does it require no energy to operate, but it also reduces fan power consumption by up to 250W, improving energy efficiency and reliability for increased cost savings. 3RU, Black, 3pc - No blanking panels.

This Net-Direct™ Air Inlet Duct provides cold airflow directly into Cisco Nexus 7009 switch intakes from above and below. Not only does it require no energy to operate, but it also reduces fan power consumption by up to 250W, improving energy efficiency and reliability for increased cost savings. 3RU, Black, 2pc - No blanking panels.

Rack filler panel, angled, 1 RU horizontal, reserves rack space for future use and is white

Rack filler panel, angled, 2 RU horizontal, reserves rack space for future use and is white

Transitional cover for angled patch panels and is white

The Mini-Com® Flush Mount Modular Patch Panel accepts up to 24 Mini-Com Modules for unshielded applications in 1 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel mounts flush with the rack and can be identified with adhesive labels and is white

The Mini-Com® Flush Mount Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 2 RU, and mounts to 19 inch and 23 inch racks and cabinets. The patch panel mounts flush with the rack and can be identified with adhesive labels and is white.

The Mini-Com® High Density Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The patch panel is white.

The Mini-Com® Flush Mount Angled Modular Patch Panel accepts up to 24 Mini-Com Modules for unshielded applications in 1 RU, and mounts to 19 inch and 23 inch racks and cabinets. The patch panel mounts flush with the rack and can be identified with adhesive labels and is white.

The Mini-Com® Flush Mount Angled Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 2 RU, and mounts to 19 inch and 23 inch racks and cabinets. The patch panel mounts flush with the rack and can be identified with adhesive labels and is white.

The Mini-Com® High Density Angled Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The patch panel is white.

Magnet suitable for surface mount boxes with a quick release cover. Package includes 10 magnets.

Replacement label and label cover kit, each kit includes fifty labels and fifty clear label covers per bag. Compatible with single gang faceplates with label pocket.

Modular plug termination tool

Ferrule Crimp Tool, semiautomatic, trapezium precision crimp on Panduit ferrules

Ferrule Crimp Tool, semiautomatic, square crimp on Panduit ferrules

UAC COLUMN ADAPTER KIT

UAC Column Adapter Kit - WH

Cabinet to floor Sealing for 600mm Cabinet

Cabinet to floor Sealing for 700mm Cabinet

Cabinet to floor Sealing for 800mm Cabinet

Cabinet to floor Sealing for 1000mm Cabinet

The Net-Contain™ Ceiling Grid Kit is used with the Drop Away Roof Panel to suppress fire in the data center. It is part of the Universal Aisle Containment thermal solution. The 3-foot (900mm) ceiling grid is black.

The Net-Contain™ Ceiling Grid Kit is used with the Drop Away Roof Panel to suppress fire in the data center. It is part of the Universal Aisle Containment thermal solution. The 3-foot (900mm) ceiling grid is white.

The Net-Contain™ Ceiling Grid Kit is used with the Drop Away Roof Panel to suppress fire in the data center. It is part of the Universal Aisle Containment thermal solution. The 4-foot (1200mm) ceiling grid is black.

The Net-Contain™ Ceiling Grid Kit is used with the Drop Away Roof Panel to suppress fire in the data center. It is part of the Universal Aisle Containment thermal solution. The 4-foot (1200mm) ceiling grid is white.

The Net-Contain™ Ceiling Grid Kit is used with the Drop Away Roof Panel to suppress fire in the data center. It is part of the Universal Aisle Containment thermal solution. The 6-foot (1800mm) ceiling grid is black.

The Net-Contain™ Ceiling Grid Kit is used with the Drop Away Roof Panel to suppress fire in the data center. It is part of the Universal Aisle Containment thermal solution. The 6-foot (1800mm) ceiling grid is white.

The Net-Contain™ Containment Dual Sliding Door is designed to be used with the Universal Aisle Containment. It accommodates a 4' (1200mm) or a 6' (1800mm) aisle width and is silver.

The Net-Contain™ containment dual sliding doors is designed to be used with the Universal Aisle Containment. It accommodates a 4' (1200mm) or a 6' (1800mm) aisle width and is silver.

The conversion kit is used to convert an USRC single row end of row frame to UAC to row end of row frame with a 900mm wide aisle pod. It is black.

The conversion kit is used to convert an USRC single row end of row frame to UAC to row end of row frame with a 900mm wide contained aisle. It is white.

The Net-Contain™ End of Row Cap is part of the Universal Aisle Containment system for cold aisle or hot aisle contaiment in a floor-mounted structure compatible with most cabinet brands and sizes. The End of Row Cap is for 4-foot (1200mm) aisle widths. It is black.

The Net-Contain™ End of Row Cap is part of the Universal Aisle Containment system for cold aisle or hot aisle contaiment in a floor-mounted structure compatible with most cabinet brands and sizes. The End of Row Cap is for 4-foot (1200mm) aisle widths. It is white.

The Net-Contain™ End of Row Cap is part of the Universal Aisle Containment system for cold aisle or hot aisle contaiment in a floor-mounted structure compatible with most cabinet brands and sizes. The End of Row Cap is for 6-foot (1800mm) aisle widths. It is black.

The Net-Contain™ End of Row Cap is part of the Universal Aisle Containment system for cold aisle or hot aisle contaiment in a floor-mounted structure compatible with most cabinet brands and sizes. The End of Row Cap is for 6-foot (1800mm) aisle widths. It is white.

The Net-Contain™ End of Row Kit is used with the Universal Aisle Containment Drop Away Roof Panels. The End of Row Kit is for a 3-foot (900mm) aisle, and can extend up to four inches. It is black.

The Net-Contain™ End of Row Kit is used with the Universal Aisle Containment Drop Away Roof Panels. The End of Row Kit is for a 3-foot (900mm) aisle, and can extend up to four inches. It is white.

The Net-Contain™ End of Row Kit is used with the Universal Aisle Containment Drop Away Roof Panels. The End of Row Kit is for a 4-foot (1200mm) aisle, and can extend up to four inches. It is black.

The Net-Contain™ End of Row Kit is used with the Universal Aisle Containment Drop Away Roof Panels. The End of Row Kit is for a 4-foot (1200mm) aisle, and can extend up to four inches. It is white.

The Net-Contain™ End of Row Kit is used with the Universal Aisle Containment Drop Away Roof Panels. The End of Row Kit is for a 6-foot (1800mm) aisle, and can extend up to four inches. It is black.

The Net-Contain™ End of Row Kit is used with the Universal Aisle Containment Drop Away Roof Panels. The End of Row Kit is for a 6-foot (1800mm) aisle, and can extend up to four inches. It is white.

The PanZone® Consolidation Point Box Enclosure is designed to work with SMED NEXUS™ Under Floor Systems as a consolidation point. The enclosure is also suitable for other under floor systems with a minimum depth of 1.7 inches. The box can also be wall mounted vertically or horizontally as a consolidation point. Consolidation point boxes save time and money by reducing the amount of time required to complete moves, adds and changes. The enclosure is made of aluminum and is black.

The Net-Contain™ Mid-Span Post is used in the Universal Aisle Containment system. This mid-span post is required every 2400mm on a partially populated row and works with cabinets that are 42 RU to 52 RU. It is white.

The Net-Contain™ Rigid Roof Panel is part of the Universal Single Row Containment system. It is 600mm wide and is black.

The Net-Contain™ Rigid Roof Panel is part of the Universal Single Row Containment system. It is 600mm wide and is white.

The Net-Contain™ Rigid Roof Panel is part of the Universal Single Row Containment system. It is 700mm wide and is black.

The Net-Contain™ Rigid Roof Panel is part of the Universal Single Row Containment system. It is 700mm wide and is white.

The Net-Contain™ Rigid Roof Panel is part of the Universal Single Row Containment system. It is 800mm wide and is black.

The Net-Contain™ Rigid Roof Panel is part of the Universal Single Row Containment system. It is 800mm wide and is white.

The Net-Contain™ End of Row Vertical Wall is part of the Universal Single Row Containment system. It is adjustable from 16 inches to 26 inches and is used with a 1200mm wide aisle. It is black.

The Net-Contain™ End of Row Vertical Wall is part of the Universal Single Row Containment system. It is adjustable from 26 inches to 38 inches and is used with a 1200mm wide aisle. It is black.

The Net-Contain™ End of Row Vertical Wall is part of the Universal Single Row Containment system. It is adjustable from 26 inches to 38 inches and is used with a 1200mm wide aisle. It is white.

The Net-Contain™ End of Row Vertical Wall is part of the Universal Single Row Containment system. It is adjustable from 38 inches to 66 inches and is used with a 1200mm wide aisle. It is black.

The Net-Contain™ End of Row Vertical Wall is part of the Universal Single Row Containment system. It is adjustable from 38 inches to 66 inches and is used with a 1200mm wide aisle. It is white.

The Net-Contain™ Vertical Wall Brace is part of the Universal Aisle Containment system. It is for use with a 4-foot (1200mm) wide aisle and is white.

The Net-Contain™ Universal Aisle Containment Wall Beam. It is 2400mm long and is white.

The PDU bracket kit vertically mounts power distribution units (PDUs) to the back of 4-post racks. The 4-post rack accessory is part of a complete rack and cable management system that manages, protects, and showcases your network investment. The kit includes a pair of brackets that are made of steel and are black.

The Net-Access™ Cabinet Sealing Grommet is used to seal off 1-inch by 4-inch pass-through openings when cables are routed from the front of the cabinet through vertical blanking panels at the rear. The airtight fabric and cinch tie minimize hot air bypass around cables to improve the cooling of IT equipment, therefore, reducing energy costs. It is black.

Copper Cable Snipping Tool

The PDU/Cable Management Bracket is designed for 42 RU Net-Verse™ cabinets. It is black.

The PDU/Cable Management Bracket is designed for 42 RU Net-Verse™ cabinets. It is white.

The 42 RU Equipment Rail Kit is designed to integrate additional cage nut style mounting rails on the Net-Verse™ D-Type Cabinets. This set of 42 RU Equipment Rails provide additional mounting functionality. It is designed with cage nut style holes eliminating the worry of stripping holes. It fits cabinets both 600mm and 800mm wide, is sold in pairs and is black.

The 12-24 tapped equipment rails are designed for 42 RU Net-Verse D-Type Cabinets. They are black and sold in pairs.

The PDU/Cable Management Bracket is designed for 45 RU Net-Verse™ cabinets. It is black.

The 12-24 tapped equipment rails are designed for 45 RU Net-Verse™ D-Type Cabinets. They are black and sold in pairs.

The vertical blanking panel is designed for use with the 600mm wide Net-Verse™ cabinet. It can be used with 42 RU, 45 RU or 48 RU cabinets and is black.

The vertical blanking panel is designed for use with the 600mm wide Net-Verse™ cabinet. It can be used with 42 RU, 45 RU or 48 RU cabinets and is white.

The Finger Bracket Kit is designed to attach to rails on the 800mm wide 42 RU Net-Verse™ cabinets. It is black.

The cable management fingers include mounting brackets to be used with a 800mm wide cabinet. It attaches to the rails on a 42 RU Net-Verse™ Cabinet. It is white.

The Finger Bracket Kit is designed to attach to rails on the 800mm wide 45 RU Net-Verse™ cabinets. It is black.

The cable management fingers include mounting brackets to be used with a 800mm wide cabinet. It attaches to the rails on a 45 RU Net-Verse™ Cabinet. It is white.

The cable management fingers include mounting brackets to be used with a 800mm wide cabinet. It attaches to the rails on a 48 RU Net-Verse™ Cabinet. It is black.

The cable management fingers include mounting brackets to be used with a 800mm wide cabinet. It attaches to the rails on a 48 RU Net-Verse™ Cabinet. It is white.

The Net-Verse™ bottom cover panel is designed for use with Net-Verse cabinets that are 600mm W x 1000mm D. It is black.

The Net-Verse™ bottom cover panel is designed for use with Net-Verse cabinets that are 600mm W x 1000mm D. It is white.

The Net-Verse™ bottom cover panel is designed for use with Net-Verse cabinets that are 600mm W x 1200mm D. It is black.

The Net-Verse™ bottom cover panel is designed for use with Net-Verse cabinets that are 800mm W x 1000mm D. It is black.

The Net-Verse™ bottom cover panel is designed for use with Net-Verse cabinets that are 800mm W x 1200mm D. It is white.

The air inlet duct directs cooling air from the cold aisle into the intake fans of switches. It fits in a 2 RU footprint and is designed for Cisco Nexus 9396 switch.

The air inlet duct directs cooling air from the cold aisle into the intake fans of switches. It fits in a 3 RU footprint and is designed for Cisco Nexus 93128 switch.

The air inlet duct directs cooling air from the cold aisle into the intake fans of switches. It fits in a 2 RU footprint and is designed for Cisco Nexus 7004 switch.

The air inlet duct directs cooling air from the cold aisle into the intake fans of switches. It fits in a 3 RU footprint and is designed for Cisco Catalyst 6880 switch.

The air inlet duct directs cooling air from the cold aisle into the intake fans of switches. It requires 3 RU above the switch and 2 RU below the switch and is designed for Cisco Catalyst 6807-XL switch.

The DataPatch 24-port Category 6A Flat Punchdown Patch Panel in White. 1RU.

The DataPatch 48-port Category 5e Flat Punchdown Patch Panel in White. 2RU.

The DataPatch 48-port Category 6A Flat Punchdown Patch Panel in White. 2RU.

The DataPatch 24-port Category 6A Angled Punchdown Patch Panel in White. 1RU.

The DataPatch 48-port Category 6A Angled Punchdown Patch Panel in White. 2RU.

The DataPatch 48-port Category 6 Angled Punchdown Patch Panel in White. 2RU.

The blanking panel helps force cold air to be transferred through the active equipment rather than being transferred directly to the hot aisle. The panel minimizes bypass airflow in racks and cabinets, optimizing cooling efficiency. The panel is 1 RU and is white.

The blanking panel helps force cold air to be transferred through the active equipment rather than being transferred directly to the hot aisle. The panel minimizes bypass airflow in racks and cabinets, optimizing cooling efficiency. The panel is 2 RU and is white.

The blanking panel helps force cold air to be transferred through the active equipment rather than being transferred directly to the hot aisle. The panel minimizes bypass airflow in racks and cabinets, optimizing cooling efficiency. The panel is 4 RU and is white.

The RJ45, 8-position, 8-wire replacement port for DataPatch Category 6A Punchdown Patch Panels. Includes clear wire retention cap.

The RJ45, 8-position, 8-wire replacement port for DataPatch Category 6 Punchdown Patch Panels. Includes clear wire retention cap.

The clear wire retention cap for DataPatch Category Punchdown Patch Panels. Package of 24.

Replacement label and label cover kit, each kit includes two labels, two clear label covers and four mounting screws. 10 kits per package. Compatible with double gang faceplates with label pocket.

Replacement label and label cover kit, each kit includes two labels, two clear label covers and two mounting screws. 10 kits per package. Compatible with single gang faceplates with label pocket.

Termination tool for jacks and field term plugs

Modular plug tool

12-FIBER HIGH DENSITY OM4 MTP TO LC CASSETTE OPTIMIZED - C-TYPE LABELING STANDARD METHOD A

The Opti-Core® simplex fiber pigtail set is OS2 with 12 pigtails, with each fiber individually colored per EIA/TIA 598-C. It is 900-micron tightly buffered fiber with LC simplex connectors on one end, has standard insertion loss and is 1 meter in length.

The Opticom® SC fiber adapter panel is OS2 and is loaded with 3 SC APC duplex fiber optic adapters. The fiber optic adapters are APC green with zirconia split sleeves.

The Opticom® SC fiber adapter panel is OM4 and is loaded with 3 SC duplex fiber optic adapters. The fiber optic adapters are aqua with zirconia split sleeves.

The Opticom® SC fiber adapter panel is OS2 and is loaded with 3 SC duplex fiber optic adapters. The fiber optic adapters are blue with zirconia split sleeves.

The Opticom® SC fiber adapter panel is OM1 and is loaded with 3 SC duplex fiber optic adapters. The fiber optic adapters are electric ivory with zirconia split sleeves.

The Opticom® SC fiber adapter panel is OS2 and is loaded with 4 SC APC simplex fiber optic adapters. The fiber optic adapters are APC green with zirconia split sleeves.

The Opticom® SC fiber adapter panel is OM4 and is loaded with 4 SC duplex fiber optic adapters. The fiber optic adapters are aqua with zirconia split sleeves.

The Opticom® SC fiber adapter panel is OS2 and is loaded with 4 SC duplex fiber optic adapters. The fiber optic adapters are blue with zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 6 LC duplex fiber optic adapters. The fiber optic adapters are Keyed A-Black and has zirconia split sleeves.

The Opticom® SC fiber adapter panel is OS2 and is loaded with 6 SC APC duplex fiber optic adapters. The fiber optic adapters are APC green with zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 6 LC duplex fiber optic adapters. The fiber optic adapters are aqua with zirconia split sleeves.

The Opticom® SC fiber adapter panel is OM4 and is loaded with 6 SC duplex fiber optic adapters. The fiber optic adapters are aqua with zirconia split sleeves.

The Opticom® SC fiber adapter panel is OM4 and is loaded with 6 SC simplex fiber optic adapters. The fiber optic adapters are aqua with zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 6 LC duplex fiber optic adapters. The fiber optic adapters are Keyed B-Red and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OS2 and is loaded with 6 LC duplex fiber optic adapters. The fiber optic adapters are blue with zirconia split sleeves.

The Opticom® SC fiber adapter panel is OS2 and is loaded with 6 SC duplex fiber optic adapters. The fiber optic adapters are blue with zirconia split sleeves.

The Opticom® SC fiber adapter panel is OS2 and is loaded with 6 SC simplex fiber optic adapters. The fiber optic adapters are blue with zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 6 LC duplex fiber optic adapters. The fiber optic adapters are Keyed C-Green and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 6 LC duplex fiber optic adapters. The fiber optic adapters are Keyed D-Yellow and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 6 LC duplex fiber optic adapters. The fiber optic adapters are Keyed E-Orange and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 6 LC duplex fiber optic adapters. The fiber optic adapters are Keyed F-Dark Blue and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 6 LC duplex fiber optic adapters. The fiber optic adapters are Keyed G-Violet and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 6 LC duplex fiber optic adapters. The fiber optic adapters are Keyed H-Aqua and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 6 LC duplex fiber optic adapters. The fiber optic adapters are Keyed J-Rose and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 6 LC duplex fiber optic adapters. The fiber optic adapters are Keyed K-Intl Gray and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 6 LC duplex fiber optic adapters. The fiber optic adapters are Keyed L-Light Brown and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 6 LC duplex fiber optic adapters. The fiber optic adapters are Keyed P-Keyed White and has zirconia split sleeves.

The Opticom® ST fiber adapter panel is OS2 and is loaded with 6 ST simplex fiber optic adapters. The fiber optic adapters are steel bodied and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 8 LC duplex fiber optic adapters. The fiber optic adapters are aqua with zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 8 LC duplex fiber optic adapters. The fiber optic adapters are Keyed B-Red and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OS2 and is loaded with 8 LC duplex fiber optic adapters. The fiber optic adapters are blue with zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 8 LC duplex fiber optic adapters. The fiber optic adapters are Keyed C-Green and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 8 LC duplex fiber optic adapters. The fiber optic adapters are Keyed D-Yellow and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 8 LC duplex fiber optic adapters. The fiber optic adapters are Keyed E-Orange and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 8 LC duplex fiber optic adapters. The fiber optic adapters are Keyed F-Dark Blue and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 8 LC duplex fiber optic adapters. The fiber optic adapters are Keyed G-Violet and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 8 LC duplex fiber optic adapters. The fiber optic adapters are Keyed H-Aqua and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 8 LC duplex fiber optic adapters. The fiber optic adapters are Keyed J-Rose and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 8 LC duplex fiber optic adapters. The fiber optic adapters are Keyed K-Intl Gray and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 8 LC duplex fiber optic adapters. The fiber optic adapters are Keyed L-Light Brown and has zirconia split sleeves.

The Opticom® ST fiber adapter panel is OS2 and is loaded with 8 ST simplex fiber optic adapters. The fiber optic adapters are steel bodied and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 12 LC duplex fiber optic adapters. The fiber optic adapters are Keyed A-Black and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OS2 and is loaded with 12 LC APC duplex fiber optic adapters. The fiber optic adapters are APC green with zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 12 LC duplex fiber optic adapters. The fiber optic adapters are aqua with zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 12 LC duplex fiber optic adapters. The fiber optic adapters are Keyed B-Red and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OS2 and is loaded with 12 LC duplex fiber optic adapters. The fiber optic adapters are blue with zirconia split sleeves.

The Opticom® LC fiber adapter panel is OS2 and is loaded with 12 LC simplex fiber optic adapters. The fiber optic adapters are blue with zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 12 LC duplex fiber optic adapters. The fiber optic adapters are Keyed C-Green and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 12 LC duplex fiber optic adapters. The fiber optic adapters are Keyed D-Yellow and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 12 LC duplex fiber optic adapters. The fiber optic adapters are Keyed E-Orange and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 12 LC duplex fiber optic adapters. The fiber optic adapters are Keyed F-Dark Blue and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 12 LC duplex fiber optic adapters. The fiber optic adapters are Keyed G-Violet and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 12 LC duplex fiber optic adapters. The fiber optic adapters are Keyed H-Aqua and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 12 LC duplex fiber optic adapters. The fiber optic adapters are Keyed J-Rose and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 12 LC duplex fiber optic adapters. The fiber optic adapters are Keyed K-Intl Gray and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 12 LC duplex fiber optic adapters. The fiber optic adapters are Keyed L-Light Brown and has zirconia split sleeves.

The Opticom® LC fiber adapter panel is OM4 and is loaded with 12 LC duplex fiber optic adapters. The fiber optic adapters are Keyed P-Keyed White and has zirconia split sleeves.

The Opticom® blank fiber adapter panel is used to reserve space for future use. The blanking panel is plastic and is black in color.

The Opticom® MPO fiber adapter panel is loaded with 4 MPO fiber optic adapters. The fiber optic adapters are in the key-up/key-down position, type a polarity and are black in color. The MPOs are positioned in a vertical arrangement when looking head-on on a horizontal-orientated faceplate.

The Opticom® MPO fiber adapter panel is loaded with 6 MPO fiber optic adapters. The fiber optic adapters are in the key-up/key-up position, type b polarity and are charcoal gray in color. The MPOs are positioned in a vertical arrangement when looking head-on on a horizontal-orientated faceplate.

The Opticom® MPO fiber adapter panel is loaded with 8 MPO fiber optic adapters. The fiber optic adapters are in the key-up/key-down position, type a polarity and are black in color. The MPOs are positioned in a vertical arrangement when looking head-on on a horizontal-orientated faceplate.

The Opticom® MPO fiber adapter panel is loaded with 12 MPO fiber optic adapters. The fiber optic adapters are in the key-up/key-down position, type a polarity and are black in color. The MPOs are positioned in a vertical arrangement when looking head-on on a horizontal-orientated faceplate.

OM4+ SIGNATURE CORE FIBER; ULTRA LOW LOSS; 12 FIBERS TOTAL; LC DUPLEX ADAPTER; UNIVERSAL

OM4+ SIGNATURE CORE FIBER; ULTRA LOW LOSS; 24 FIBERS TOTAL; LC DUPLEX ADAPTER (COLOR AND SPLIT SLEEVE DICTATED BY FIBER TYPE); UNIVERSAL

OPTICOM CASSETTE OM5+ 1 MPO/6 DUP LC ULTRA IL METHOD A - PAIR FLIPPED

OPTICOM CASSETTE OM5+ 1 MPO/6 DUP LC ULTRA IL METHOD A

OPTICOM CASSETTE OM5+ 1 MPO/6 DUP LC ULTRA IL METHOD B1

OPTICOM CASSETTE OM5+ 1 MPO/6 DUP LC ULTRA IL METHOD B2

OPTICOM CASSETTE OM5+ 2 MPO/12 DUP LC ULTRA IL METHOD A - PAIR FLIPPED

OPTICOM CASSETTE OM5+ 2 MPO/12 DUP LC ULTRA IL METHOD A

OPTICOM CASSETTE OM5+ 2 MPO/12 DUP LC ULTRA IL METHOD B1

OPTICOM CASSETTE OM5+ 2 MPO/12 DUP LC ULTRA IL METHOD B2

OM3 FIBER; UITRA LOW LOSS; 12 FIBERS TOTAL; LC DUPLEX ADAPTER (COLOR AND SPLIT SLEEVE DICTATED BY FIBER TYPE); UNIVERSAL

OM3 FIBER; UITRA LOW LOSS; 24 FIBERS TOTAL; LC DUPLEX ADAPTER (COLOR AND SPLIT SLEEVE DICTATED BY FIBER TYPE); UNIVERSAL

OM3 FIBER; STANDARD LOSS; 12 FIBERS TOTAL; LC DUPLEX ADAPTER (COLOR AND SPLIT SLEEVE DICTATED BY FIBER TYPE); UNIVERSAL

OM3 FIBER; STANDARD LOSS; 24 FIBERS TOTAL; LC DUPLEX ADAPTER (COLOR AND SPLIT SLEEVE DICTATED BY FIBER TYPE); UNIVERSAL

The OptiCom® Fiber Cassette is OM3, and features 1 MPO to 6 duplex LC and supports 12 fibers total. It is optimized insertion loss and uses universal polarity. The cassette has a black cover with a black MPO connector and 6 aqua LC adapters.

The OptiCom® Fiber Cassette is OM3, and features 2 MPO to 12 duplex LC and supports 24 fibers total. It is optimized insertion loss and uses universal polarity. The cassette has a black cover with 2 black MPO connectors and 12 aqua LC adapters.

The OptiCom® Fiber Cassette is OM4, and features 1 MPO to 6 duplex LC and supports 12 fibers total. It is ultra insertion loss and uses universal polarity. The cassette has a black cover with a black MPO connector and 6 aqua LC adapters.

The OptiCom® Fiber Cassette is OM4, and features 2 MPO to 12 duplex LC and supports 24 fibers total. It is ultra insertion loss and uses universal polarity. The cassette has a black cover with 2 black MPO connectors and 12 aqua LC connectors.

OM4 FIBER; STANDARD LOSS; 12 FIBERS TOTAL; LC DUPLEX ADAPTER (COLOR AND SPLIT SLEEVE DICTATED BY FIBER TYPE); UNIVERSAL

OM4 FIBER; STANDARD LOSS; 24 FIBERS TOTAL; LC DUPLEX ADAPTER (COLOR AND SPLIT SLEEVE DICTATED BY FIBER TYPE); UNIVERSAL

40G-10G OPTICOM CASSETTE WITH OM3 FIBER, STANDARD LOSS, 16-FIBER TOTAL, FRONT LC DUPLEX AQUA ADAPTER, REAR MALE MTP (PINS); METHOD A CONNECTIVITY

40G-10G OPTICOM CASSETTE WITH OM3 FIBER, STANDARD LOSS, 16-FIBER TOTAL, FRONT LC DUPLEX AQUA ADAPTER, REAR MALE MTP (PINS); METHOD B CONNECTIVITY

40G-10G OPTICOM CASSETTE WITH OM3 FIBER, OPTIMIZED LOW LOSS, 16-FIBER TOTAL, FRONT LC DUPLEX AQUA ADAPTER, REAR MALE MTP (PINS); METHOD A CONNECTIVITY

40G-10G OPTICOM CASSETTE WITH OM3 FIBER, OPTIMIZED LOW LOSS, 16-FIBER TOTAL, FRONT LC DUPLEX AQUA ADAPTER, REAR MALE MTP (PINS); METHOD B CONNECTIVITY

40G-10G OPTICOM CASSETTE WITH OM4 FIBER, STANDARD LOSS, 16-FIBER TOTAL, FRONT LC DUPLEX AQUA ADAPTER, REAR MALE MTP (PINS); METHOD A CONNECTIVITY

40G-10G OPTICOM CASSETTE WITH OM4 FIBER, STANDARD LOSS, 16-FIBER TOTAL, FRONT LC DUPLEX AQUA ADAPTER, REAR MALE MTP (PINS); METHOD B CONNECTIVITY

40G-10G OPTICOM CASSETTE WITH OM4 FIBER, OPTIMIZED LOW LOSS, 16-FIBER TOTAL, FRONT LC DUPLEX AQUA ADAPTER, REAR MALE MTP (PINS); METHOD A CONNECTIVITY

40G-10G QUICKNET CASSETTE WITH OM4 FIBER, OPTIMIZED LOW LOSS, 16-FIBER TOTAL, FRONT LC DUPLEX AQUA ADAPTER, REAR MALE MTP (PINS); METHOD B CONNECTIVITY

The Opticom Splitter Cassette provides a 2x4 split ratio splitter for use in Optical LAN applications utilizing Multi-Purpose Enclosures, zero-RU brackets, or other Opticom form-factor management products. The cassettes have SC/APC connectivity in duplexed output ports and simplex input ports, which follow ANSI/TIA standard colors for indentification. The device provides an even split ratio across the operating wavelengths.

The Opticom Splitter Cassette provides a 1x8 split ratio splitter for use in Optical LAN applications utilizing Multi-Purpose Enclosures, zero-RU brackets, or other Opticom form-factor management products. The cassettes have SC/APC connectivity in duplexed output ports and simplex input ports, which follow ANSI/TIA standard colors for indentification. The device provides an even split ratio across the operating wavelengths.

The Opticom Splitter Cassette provides a 2x8 split ratio splitter for use in Optical LAN applications utilizing Multi-Purpose Enclosures, zero-RU brackets, or other Opticom form-factor management products. The cassettes have SC/APC connectivity in duplexed output ports and simplex input ports, which follow ANSI/TIA standard colors for indentification. The device provides an even split ratio across the operating wavelengths.

The Panduit® Opticom® Rack Mount Fiber Enclosure ensures network reliability by housing, organizing, managing and protecting fiber optic cable, terminations, splices, connectors and patch cords. The FCE1U is black, made of steel and features 4 FAP/cassette slots in a 1 RU footprint for maximum patch field density. Fibers are easily accessible through a slide-out, tilt-down drawer, while rear cable management maintains proper slacking and spooling. 1.73"H x 17.60"W x 17.9"D (43.9mm x 447.0mm x 454mm)

The Panduit® Opticom® Rack Mount Fiber Enclosure ensures network reliability by housing, organizing, managing and protecting fiber optic cable, terminations, splices, connectors and patch cords. The FCE2U is black, made of steel and features 8 FAP/cassette slots in a 2 RU footprint for maximum patch field density. Fibers are easily accessible through a slide-out, tilt-down drawer, while rear cable management maintains proper slacking and spooling. 3.48"H x 17.60"W x 17.9"D (88.4mm x 447.0mm x 454mm)

The Panduit® Opticom® Rack Mount Fiber Enclosure ensures network reliability by housing, organizing, managing and protecting fiber optic cable, terminations, splices, connectors and patch cords. The FCE4U is black, made of steel and features 12 FAP/cassette slots in a 4 RU footprint for maximum patch field density. Fibers are easily accessible through a slide-out, tilt-down drawer, while rear cable management maintains proper slacking and spooling. 6.98"H x 17.60"W x 16.30"D (177.0mm x 447.0mm x 414.0mm)

The fiber optic cleaning solution is maximized for cleaning fiber optic components. It has a multi-function cap, allowing dispensation of the cleaning solution on the top as per traditional pump bottles or more precision application using a straw. It comes in a 3 oz (58 ml) non-pressurized pump bottle.

The fiber optic cleaning wipes are lint-free, packaged in a dispenser box with perforations separating each wipe and color-coded lanes to limit re-use of the wipe. The box contains 100 wipes.

The rack-mount fiber optic splitter tray fits in 19" racks, occupies 1 RU, and uses a planar lightwave circuit to split one signal to eight signals for passive optical network applications. The splitter tray includes one SC-APC input and eight SC-APC outputs on the front of the device.

The rack-mount fiber optic splitter tray fits in 19" racks, occupies 1 RU, and uses a planar lightwave circuit to split one signal to sixteen signals for passive optical network applications. The splitter tray includes one SC-APC input and sixteen SC-APC outputs on the front of the device.

The rack-mount fiber optic splitter tray fits in 19" racks, occupies 1 RU, and uses a planar lightwave circuit to split one signal to thirty-two signals for passive optical network applications. The splitter tray includes one SC-APC input and thirty-two SC-APC outputs on the front of the device.

The rack-mount fiber optic splitter tray fits in 19" racks, occupies 1 RU, and uses a planar lightwave circuit to split one signal to eight signals for passive optical network applications. The splitter tray includes two SC-APC inputs and eight SC-APC outputs on the front of the device.

The rack-mount fiber optic splitter tray fits in 19" racks, occupies 1 RU, and uses a planar lightwave circuit to split one signal to sixteen signals for passive optical network applications. The splitter tray includes two SC-APC inputs and sixteen SC-APC outputs on the front of the device.

The rack-mount fiber optic splitter tray fits in 19" racks, occupies 1 RU, and uses a planar lightwave circuit to split one signal to thirty-two signals for passive optical network applications. The splitter tray includes two SC-APC inputs and thirty-two SC-APC outputs on the front of the device.

The rack-mount fiber optic splitter tray fits in 19" racks, occupies 1 RU, and uses a planar lightwave circuit to split one signal to eight signals for passive optical network applications. The splitter tray includes a covered, splice-ready input stage on the rear of the device and eight SC-APC outputs on the front of the device.

The rack-mount fiber optic splitter tray fits in 19" racks, occupies 1 RU, and uses a planar lightwave circuit to split one signal to sixteen signals for passive optical network applications. The splitter tray includes a covered, splice-ready input stage on the rear of the device and sixteen SC-APC outputs on the front of the device.

The rack-mount fiber optic splitter tray fits in 19" racks, occupies 1 RU, and uses a planar lightwave circuit to split one signal to thirty-two signals for passive optical network applications. The splitter tray includes a covered, splice-ready input stage on the rear of the device and thirty-two SC-APC outputs on the front of the device.

The rack-mount fiber optic splitter tray fits in 19" racks, occupies 1 RU, and uses a planar lightwave circuit to split one signal to eight signals for passive optical network applications. The splitter tray includes a covered, splice-ready input stage on the rear of the device and eight SC-APC outputs on the front of the device.

The rack-mount fiber optic splitter tray fits in 19" racks, occupies 1 RU, and uses a planar lightwave circuit to split one signal to sixteen signals for passive optical network applications. The splitter tray includes a covered, splice-ready input stage on the rear of the device and sixteen SC-APC outputs on the front of the device.

The rack-mount fiber optic splitter tray fits in 19" racks, occupies 1 RU, and uses a planar lightwave circuit to split one signal to thirty-two signals for passive optical network applications. The splitter tray includes a covered, splice-ready input stage on the rear of the device and thirty-two SC-APC outputs on the front of the device.