Panduit jacks, faceplates and cross-connect parts, page 1 of 7

Above Floor Raceway - Table Leg Fitting - Off White

Above Floor Raceway - Wall Transition Fitting - Off White

Above Floor Raceway - Wall Transition Fitting - Office Slate

The break-away adapter is constructed of Cat 6A 26 AWG UTP, twisted pair stranded copper cable, a high performance RJ45 modular plug, and a releasable RJ45 modular jack. The cable is CM rated. The adapter is optimized for use with Panduit® Patch Cords. This break-away adapter is an easy-release jack and plug assembly that allows any standard patch cord to detach upon a sudden pulling force. The adapter cord is 8 inches in length and black.

The Brush Seal Blanking Panel controls air flow but also allows front-to-back cables to pass through the nylon brushes. The blanking panel is 1 RU and black in color.

The Brush Seal Blanking Panel controls air flow but also allows front-to-back cables to pass through the nylon brushes. The blanking panel is 2 RU and black in color.

The Net-Contain™ End of Row Cap is used with cabinet supported containment systems to manage temperatures in the data center. The end of row cap is 1200mm wide, is compatible with 48RU cold aisle containment systems, and is black.

Replacement label and label cover kit, each kit includes six labels and six clear label covers per bag. Compatible with front access patch panels (CPPL24WBLY, CPPL48WBLY, CPPLA24WBLY, CPPLA48WBLY, CPPL24WRBLY) and faceplates (CFFPL4, CFFPEBSL4, CFPHSL4).

Replacement label and label cover kit, each kit includes four preprinted labels and four clear label covers per bag. Printed side identify ports 1 thru 24, reverse side has a write-on area. Compatible with M6 style patch panels (CPPL24M6BLY, CPPL48M6BLY).

Replacement label and label cover kit, each kit includes four preprinted labels and four clear label covers per bag. Printed side identify ports 25 thru 48, reverse side has a write-on area. Compatible with M6 style patch panels (CPPL48M6BLY).

The Mini-Com® DIN Rail Mount Adapter mounts to standard 35mm DIN rails and accepts any single port Mini-Com® Module. It is black and includes a label and label cover.

The shielded Mini-Com® DIN Shielded Rail Mount Adapter mounts to a standard 35mm DIN rail. It accepts any single port Mini-Com® Module which snap in and out for easy moves, adds, and changes. Color: Black

The Mini-Com® DIN Rail Mount Adapter mounts to standard 35mm DIN rails and accepts any single port Mini-Com® Module. It is international gray and includes a label and label cover.

The shielded Mini-Com® DIN Shielded Rail Mount Adapter mounts to a standard 35mm DIN rail. It accepts any single port Mini-Com® Module which snap in and out for easy moves, adds, and changes. Color: International Gray

Double gang Executive style faceplate frame, accepts up to four 1/2-size module inserts or six 1/3-size module inserts. Supplied with labels and label cover/screw covers and is off white.

Single gang Executive style faceplate frame, accepts up to two 1/2-size module inserts or three 1/3-size module inserts. Supplied with labels and label cover/screw covers and is off white.

Double gang Executive style faceplate frame, accepts up to four 1/2-size module inserts or six 1/3-size module inserts. Supplied with labels and label cover/screw covers and is white.

Single gang Executive style faceplate frame, accepts up to two 1/2-size module inserts or three 1/3-size module inserts. Supplied with labels and label cover/screw covers and is white.

45mm x 45mm adapter frame, accepts one 1/2-size module insert and is arctic white.

Magnet with adhesive backing suitable for select elongated surface mount boxes. Package includes 10 magnets.

The Mini-Com® Surface Mount Box is plenum rated and accepts one Mini-Com Module. The box offers a variety of mounting options using adhesive tape or screws. The box can be identified with an adhesive label and is black.

The Mini-Com® Surface Mount Box is plenum rated and accepts one Mini-Com Module. The box offers a variety of mounting options using adhesive tape or screws. The box can be identified with an adhesive label and is electric ivory.

The Mini-Com® Surface Mount Box is plenum rated and accepts one Mini-Com Module. The box offers a variety of mounting options using adhesive tape or screws. The box can be identified with an adhesive label and is international gray.

The Mini-Com® Surface Mount Box is plenum rated and accepts one Mini-Com Module. The box offers a variety of mounting options using adhesive tape or screws. The box can be identified with an adhesive label and is off white.

The Mini-Com® Surface Mount Box is plenum rated and accepts one Mini-Com Module. The box offers a variety of mounting options using adhesive tape or screws. The box can be identified with an adhesive label and is white.

The Mini-Com® Surface Mount Box is plenum rated and accepts two Mini-Com Modules. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box can be identified with an adhesive label and is black.

The Mini-Com® Surface Mount Box is plenum rated and accepts two Mini-Com Modules. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box can be identified with an adhesive label and is electric ivory.

The Mini-Com® Surface Mount Box is plenum rated and accepts two Mini-Com Modules. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box can be identified with an adhesive label and is international gray.

The Mini-Com® Surface Mount Box is plenum rated and accepts two Mini-Com Modules. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box can be identified with an adhesive label and is off white.

The Mini-Com® Surface Mount Box is plenum rated and accepts two Mini-Com Modules. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box can be identified with an adhesive label and is white.

The Mini-Com® Surface Mount Box accepts four Mini-Com Modules. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box includes label pocket for easy identification and is black.

The Mini-Com® Surface Mount Box accepts four Mini-Com Modules. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box includes label pocket for easy identification and is electric ivory.

The Mini-Com® Surface Mount Box accepts four Mini-Com Modules. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box includes label pocket for easy identification and is international gray.

The Mini-Com® Surface Mount Box accepts four Mini-Com Modules. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box includes label pocket for easy identification and is off white.

The Mini-Com® Surface Mount Box accepts four Mini-Com Modules. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box includes label pocket for easy identification and is white.

The Mini-Com® Multimedia Surface Mount Box accepts six Mini-Com Modules. A built-in fiber spool in the base protects and secures cable slack in place. The box offers a variety of mounting options using adhesive tape or screws. The box includes a label pocket for easy identification and is black.

The Mini-Com® Multimedia Surface Mount Box accepts six Mini-Com Modules. A built-in fiber spool in the base protects and secures cable slack in place. The box offers a variety of mounting options using adhesive tape or screws. The box includes a label pocket for easy identification and is electric ivory.

The Mini-Com® Multimedia Surface Mount Box accepts six Mini-Com Modules. A built-in fiber spool in the base protects and secures cable slack in place. The box offers a variety of mounting options using adhesive tape or screws. The box includes a label pocket for easy identification and is off white.

The Mini-Com® Multimedia Surface Mount Box accepts six Mini-Com Modules. A built-in fiber spool in the base protects and secures cable slack in place. The box offers a variety of mounting options using adhesive tape or screws. The box includes a label pocket for easy identification and is white.

The Mini-Com® Multimedia Surface Mount Box accepts twelve Mini-Com Modules. A built-in fiber spool in the base protects and secures cable slack in place. The box offers a variety of mounting options using adhesive tape or screws. The box includes a bridge, a label pocket for easy identification and is black.

The Mini-Com® Multimedia Surface Mount Box accepts twelve Mini-Com Modules. A built-in fiber spool in the base protects and secures cable slack in place. The box offers a variety of mounting options using adhesive tape or screws. The box includes a bridge, a label pocket for easy identification and is electric ivory.

The Mini-Com® Multimedia Surface Mount Box accepts twelve Mini-Com Modules. A built-in fiber spool in the base protects and secures cable slack in place. The box offers a variety of mounting options using adhesive tape or screws. The box includes a bridge, a label pocket for easy identification and is off white.

The Mini-Com® Multimedia Surface Mount Box accepts twelve Mini-Com Modules. A built-in fiber spool in the base protects and secures cable slack in place. The box offers a variety of mounting options using adhesive tape or screws. The box includes a bridge, a label pocket for easy identification and is white.

The Mini-Com® Surface Mount Box is plenum rated and accepts one Mini-Com Module. Cover has a quick release mechanism that allows easy access to the modules. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box can be identified with an adhesive label and is arctic white.

The Mini-Com® Surface Mount Box is plenum rated and accepts one Mini-Com Module. Cover has a quick release mechanism that allows easy access to the modules. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box can be identified with an adhesive label and is electric ivory.

The Mini-Com® Surface Mount Box is plenum rated and accepts one Mini-Com Module. Cover has a quick release mechanism that allows easy access to the modules. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box can be identified with an adhesive label and is off white.

The Bend Radius Control Finger Section provides support and bend radius for patch cords when transitioning to and from active equipment. The finger section can be installed directly over the active equipment at any rack unit in the rack or cabinet. The clip is 5RU, 3 in. deep and black in color.

The Mini-Com® Surface Mount Box is plenum rated and accepts two Mini-Com Modules. Cover has a quick release mechanism that allows easy access to the modules; cover can be secured with a screw. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box includes a label pocket for easy identification and is actic white.

The Mini-Com® Surface Mount Box is plenum rated and accepts two Mini-Com Modules. Cover has a quick release mechanism that allows easy access to the modules; cover can be secured with a screw. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box includes a label pocket for easy identification and is electric ivory.

The Mini-Com® Surface Mount Box is plenum rated and accepts two Mini-Com Modules. Cover has a quick release mechanism that allows easy access to the modules; cover can be secured with a screw. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box includes a label pocket for easy identification and is off white.

The Mini-Com® Surface Mount Box is plenum rated and accepts two Mini-Com Modules. Cover has a quick release mechanism that allows easy access to the modules; cover can be secured with a screw. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box includes a label pocket for easy identification and is white.

The Mini-Com® Surface Mount Box is plenum rated and accepts four Mini-Com Modules. Cover has a quick release mechanism that allows easy access to the modules; cover can be secured with a screw. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box includes a label pocket for easy identification and is arctic white.

The Mini-Com® Surface Mount Box is plenum rated and accepts four Mini-Com Modules. Cover has a quick release mechanism that allows easy access to the modules; cover can be secured with a screw. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box includes a label pocket for easy identification and is electric ivory.

The Mini-Com® Surface Mount Box is plenum rated and accepts four Mini-Com Modules. Cover has a quick release mechanism that allows easy access to the modules; cover can be secured with a screw. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box includes a label pocket for easy identification and is off white.

The Bend Radius Control Finger Section provides support and bend radius for patch cords when transitioning to and from active equipment. The finger section can be installed directly over the active equipment at any rack unit in the rack or cabinet. The clip is 5RU, 5 in. deep and black in color.

The Mini-Com® Surface Mount Box is plenum rated and accepts six Mini-Com Modules. Cover has a quick release mechanism that allows easy access to the modules; cover can be secured with a screw. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box includes a label pocket for easy identification and is electric ivory.

The Mini-Com® Surface Mount Box is plenum rated and accepts six Mini-Com Modules. Cover has a quick release mechanism that allows easy access to the modules; cover can be secured with a screw. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box includes a label pocket for easy identification and is off white.

The Mini-Com® Surface Mount Box is plenum rated and accepts six Mini-Com Modules. Cover has a quick release mechanism that allows easy access to the modules; cover can be secured with a screw. The box offers a variety of mounting options using adhesive tape, screws, or optional magnet. The box includes a label pocket for easy identification and is white.

The Mini-Com® Cat 6A UTP RJ45 Coupler Module is designed and 100% factory tested to allow for up to one coupler to be used and meet channel performance requirements. Contacts are plated with 50 microinches of gold for superior performance. The coupler module is compatible with Mini-Com Modular Patch Panels and Faceplates. The coupler is black.

The Mini-Com® Cat 6A UTP RJ45 Coupler Module is designed and 100% factory tested to exceed industry standard performance requirements. Contacts are plated with 50 microinches of gold for superior performance. The coupler module is compatible with Mini-Com Modular Patch Panels and Faceplates. The coupler is Blue.

The Mini-Com® Cat 6A UTP RJ45 Coupler Module is designed and 100% factory tested to exceed industry standard performance requirements. Contacts are plated with 50 microinches of gold for superior performance. The coupler module is compatible with Mini-Com Modular Patch Panels and Faceplates. The coupler is Green.

The Mini-Com® Cat 6A UTP RJ45 Coupler Module is designed and 100% factory tested to exceed industry standard performance requirements. Contacts are plated with 50 microinches of gold for superior performance. The coupler module is compatible with Mini-Com Modular Patch Panels and Faceplates. The coupler is International Gray.

The Mini-Com® Cat 6A UTP RJ45 Coupler Module is designed and 100% factory tested to allow for up to one coupler to be used and meet channel performance requirements. Contacts are plated with 50 microinches of gold for superior performance. The coupler module is compatible with Mini-Com Modular Patch Panels and Faceplates. The coupler is off white.

The Mini-Com® Cat 6A UTP RJ45 Coupler Module is designed and 100% factory tested to exceed industry standard performance requirements. Contacts are plated with 50 microinches of gold for superior performance. The coupler module is compatible with Mini-Com Modular Patch Panels and Faceplates. The coupler is Orange.

The Mini-Com® Cat 6A UTP RJ45 Coupler Module is designed and 100% factory tested to exceed industry standard performance requirements. Contacts are plated with 50 microinches of gold for superior performance. The coupler module is compatible with Mini-Com Modular Patch Panels and Faceplates. The coupler is Red.

The Mini-Com® Cat 6A UTP RJ45 Coupler Module is designed and 100% factory tested to exceed industry standard performance requirements. Contacts are plated with 50 microinches of gold for superior performance. The coupler module is compatible with Mini-Com Modular Patch Panels and Faceplates. The coupler is Yellow.

The Mini-Com® Cat 6 UTP RJ45 Coupler Module is designed and 100% factory tested to allow for up to two couplers to be used and meet channel performance requirements. Contacts are plated with 50 microinches of gold for superior performance. The coupler module is compatible with Mini-Com Modular Patch Panels and Faceplates. The coupler is black.

The Mini-Com® Cat 6 UTP RJ45 Coupler Module is designed and 100% factory tested to allow for up to two couplers to be used and meet channel performance requirements. Contacts are plated with 50 microinches of gold for superior performance. The coupler module is compatible with Mini-Com Modular Patch Panels and Faceplates. The coupler is black, bulk-packaged at 500 pieces.

The Mini-Com® Cat 6 UTP RJ45 Coupler Module is designed and 100% factory tested to exceed industry standard performance requirements. Contacts are plated with 50 microinches of gold for superior performance. The coupler module is compatible with Mini-Com Modular Patch Panels and Faceplates. The coupler is Blue.

The Mini-Com® Cat 6 UTP RJ45 Coupler Module is designed and 100% factory tested to exceed industry standard performance requirements. Contacts are plated with 50 microinches of gold for superior performance. The coupler module is compatible with Mini-Com Modular Patch Panels and Faceplates. The coupler is Green.

The Mini-Com® Cat 6 UTP RJ45 Coupler Module is designed and 100% factory tested to allow for up to two couplers to be used and meet channel performance requirements. Contacts are plated with 50 microinches of gold for superior performance. The coupler module is compatible with Mini-Com Modular Patch Panels and Faceplates. The coupler is off white.

The Mini-Com® Cat 6 UTP RJ45 Coupler Module is designed and 100% factory tested to exceed industry standard performance requirements. Contacts are plated with 50 microinches of gold for superior performance. The coupler module is compatible with Mini-Com Modular Patch Panels and Faceplates. The coupler is Orange.

The 3-digit cabinet combination lock is a security accessory for cabinets with a single hinge or split doors. It features a key override and is black.

The Pan-Net® Cat 6a STP RJ45 Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module includes 24 per package.

The air inlet duct fits in a 1 RU footprint, resides in-line and below switch and provides cold aisle airflow to Cisco4948. 4928, and 4924 switches. It optimizes the thermal efficiency of the switch in cabinet applications.

The air inlet duct fits in a 2 RU footprint, resides in-line and below switch and provides cold aisle airflow to Cisco Nexus N2K and Catalyst 9448E switches. It optimizes the thermal efficiency of the switch in cabinet applications.

The air inlet duct fits in a 4 RU footprint, resides in-line and provides cold aisle airflow to Cisco 3945 switches. Featuring integrated perforation, it optimizes the thermal efficiency of the switch in cabinet applications.

The Mini-Com® duplex adapter accepts two Mini-Com® modules. The adapter mounts behind a standard 106 NEMA faceplate and is electric ivory.

The Mini-Com® duplex adapter accepts two Mini-Com® modules. The adapter mounts behind a standard 106 NEMA faceplate and is off white.

The Mini-Com® duplex adapter accepts two Mini-Com® modules. The adapter mounts behind a standard 106 NEMA faceplate and is white.

The Mini-Com® duplex adapter accepts four Mini-Com® modules. The adapter mounts behind a standard 106 NEMA faceplate and is electric ivory.

The Mini-Com® duplex adapter accepts four Mini-Com® modules. The adapter mounts behind a standard 106 NEMA faceplate and is off white.

The Mini-Com® duplex adapter accepts four Mini-Com® modules. The adapter mounts behind a standard 106 NEMA faceplate and is white.

The Opticom® flat fiber patch panel is used with FMT1 and FMT2 trays and holds up to four Opticom® Cassettes or FAP adapter panels. It is compatible with all 19” wide EIA rack mount installations, is black powder coated steel, and fits in a 1 RU footprint.

The Opticom® angled fiber patch panel is used with FMT1A and FMT2A trays and holds up to four Opticom® Cassettes or FAP adapter panels. It is compatible with all 19” wide EIA rack mount installations, is black powder coated steel, and fits in a 1 RU footprint.

The Opticom® flat fiber patch panel is used with FMT1 and FMT2 trays and holds up to eight Opticom® Cassettes or FAP adapter panels. It is compatible with all 19” wide EIA rack mount installations, is black powder coated steel, and fits in a 2 RU footprint.

The Opticom® angled fiber patch panel is used with FMT1A and FMT2A trays and holds up to eight Opticom® Cassettes or FAP adapter panels. It is compatible with all 19” wide EIA rack mount installations, is black powder coated steel, and fits in a 2 RU footprint.

The Mini-Com® Modular Furniture Faceplate accepts four Mini-Com Modules. The faceplate mounts to a standard office furniture opening. The faceplate can be identified with an adhesive label and is black.

The Mini-Com® Modular Furniture Faceplate accepts four Mini-Com Modules. The faceplate mounts to a standard office furniture opening. The faceplate can be identified with an adhesive label and is black.

The Mini-Com® Modular Furniture Faceplate accepts two Mini-Com Modules. The faceplate is sloped and mounts to a standard office furniture opening. The faceplate can be identified with an adhesive label and is black.

The Mini-Com® Modular Furniture Faceplate accepts two Mini-Com Modules. The faceplate is sloped and mounts to a standard office furniture opening. The faceplate can be identified with an adhesive label and is white.

The Mini-Com® Modular Furniture Faceplate accepts three Mini-Com Modules. The faceplate mounts to a standard office furniture opening. The faceplate can be identified with an adhesive label and is black.

The Mini-Com® Modular Furniture sloped Faceplate accepts four Mini-Com Modules. The faceplate mounts to Herman Miller's custom Beltline office furniture opening. The faceplate includes a label pocket for easy identification and is black.

The Mini-Com® Modular Furniture Faceplate accepts four Mini-Com Modules. The faceplate mounts to Herman Miller's custom baseline office furniture opening. The faceplate can be identified with an adhesive label and is black.

The Mini-Com® Modular Furniture Faceplate accepts four Mini-Com Modules. The faceplate mounts to Herman Miller's custom Baseline office furniture opening. The faceplate can be identified with an adhesive label and is white.

The Mini-Com® Modular Furniture Faceplate accepts two Mini-Com Modules. The faceplate mounts to a standard office furniture opening. The faceplate includes a label pocket for easy identification and is black.

The Mini-Com® Modular Furniture Faceplate accepts two Mini-Com Modules. The faceplate mounts to a standard office furniture opening. The faceplate includes a label pocket for easy identification and is white.

The Mini-Com® Modular Furniture Faceplate accepts four Mini-Com Modules. The faceplate mounts to a standard office furniture opening. The faceplate includes a label pocket for easy identification and is black.

The Mini-Com® Modular Furniture Faceplate accepts four Mini-Com Modules. The faceplate mounts to a standard office furniture opening. The faceplate includes a label pocket for easy identification and is international gray.

The Mini-Com® Modular Furniture Faceplate accepts four Mini-Com Modules. The faceplate mounts to a standard office furniture opening. The faceplate includes a label pocket for easy identification and is off white.

The Mini-Com® Modular Furniture Faceplate accepts four Mini-Com Modules. The faceplate mounts to a standard office furniture opening. The faceplate includes a label pocket for easy identification and is white.

The Mini-Com® rectangular adapter accepts one Mini-Com® module. The adapter mounts behind standard GFCI faceplates and is white.

The Mini-Com® rectangular adapter accepts two Mini-Com® modules. The adapter mounts behind standard GFCI faceplates and is black.

Mini Com rectangular adapter, mounts behind standard GFCI faceplates, accepts two Mini-Com® Module, Electric Ivory.

The Mini-Com® rectangular adapter accepts two Mini-Com® modules. The adapter mounts behind standard GFCI faceplates and is white.

The Mini-Com® rectangular adapter accepts four Mini-Com® modules. The adapter mounts behind standard GFCI faceplates and is black.

Mini Com rectangular adapter, mounts behind standard GFCI faceplates, accepts four Mini-Com® Module, Electric Ivory.

The Mini-Com® rectangular adapter accepts four Mini-Com® modules. The adapter mounts behind standard GFCI faceplates and is white.

Brush Insert - Black

Brush Insert - Electric Ivory

Brush Insert - International White

Brush Insert - White

The Mini-Com® Classic Series Faceplate accepts one Mini-Com Module. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate can be identified with an adhesive label and is off white.

The Mini-Com® Classic Series Faceplate accepts one Mini-Com Module. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate can be identified with an adhesive label and is electric ivory.

The Mini-Com® Classic Series Faceplate accepts one Mini-Com Module. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate can be identified with an adhesive label and is off white.

The Mini-Com® Classic Series Faceplate accepts one Mini-Com Module. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate can be identified with an adhesive label and is white.

The Mini-Com® Classic Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate can be identified with an adhesive label and is black.

The Mini-Com® Classic Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate can be identified with an adhesive label and is electric ivory.

The Mini-Com® Classic Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate can be identified with an adhesive label and is off white.

The Mini-Com® Stainless Steel Faceplate accepts two Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate can be identified with an adhesive label and is made of impact resistant material to support installations in high traffic areas.

The Mini-Com® Classic Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate can be identified with an adhesive label and is white.

The Mini-Com® Classic Series Faceplate accepts four Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate can be identified with an adhesive label and is black.

The Mini-Com® Classic Series Faceplate accepts four Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate can be identified with an adhesive label and is electric ivory.

The Mini-Com® Classic Series Faceplate accepts four Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate can be identified with an adhesive label and is off white.

The Mini-Com® Stainless Steel Faceplate accepts four Mini-Com Modules. The faceplate is double gang and mounts to a NEMA standard double gang opening. The faceplate can be identified with an adhesive label and is made of impact resistant material to support installations in high traffic areas.

The Mini-Com® Stainless Steel Faceplate accepts four Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate can be identified with an adhesive label and is made of impact resistant material to support installations in high traffic areas.

The Mini-Com® Classic Series Faceplate accepts four Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate can be identified with an adhesive label and is white.

The Mini-Com® Stainless Steel Faceplate accepts six Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate can be identified with an adhesive label and is made of impact resistant material to support installations in high traffic areas.

The Mini-Com® Executive Series Faceplate accepts one Mini-Com Module. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is black.

The Mini-Com® Executive Series Faceplate accepts one Mini-Com Module. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is electric ivory.

The Mini-Com® Executive Series Faceplate accepts one Mini-Com Module. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is international gray.

The Mini-Com® Executive Series Faceplate accepts one Mini-Com Module. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is off white.

The Mini-Com® Executive Series Faceplate accepts one Mini-Com Module. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is white.

The Mini-Com® Executive Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is black.

The Mini-Com® Executive Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is electric ivory.

The Mini-Com® Executive Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is international gray.

The Mini-Com® Executive Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is white.

The Mini-Com® Executive Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is off white.

The Mini-Com® Executive Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is off white.

The Mini-Com® Executive Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is white.

The Mini-Com® Executive Series Faceplate accepts four Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is black.

The Mini-Com® Executive Series Faceplate accepts four Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is electric ivory.

The Mini-Com® Executive Series Faceplate accepts four Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is international gray.

The Mini-Com® Executive Series Faceplate accepts four Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is white.

The Mini-Com® Executive Series Faceplate accepts four Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is off white.

The Mini-Com® Executive Series Faceplate accepts four Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is off white.

The Mini-Com® Executive Series Faceplate accepts four Mini-Com Module. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is white.

The Mini-Com® Executive Series Faceplate accepts six Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is black.

The Mini-Com® Executive Series Faceplate accepts six Mini-Com Module. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is electric ivory.

The Mini-Com® Executive Series Faceplate accepts six Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is international gray.

The Mini-Com® Executive Series Faceplate accepts six Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is off white.

The Mini-Com® Executive Series Faceplate accepts six Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is white.

The Mini-Com® Executive Series Faceplate accepts ten Mini-Com Module. The faceplate is double gang and mounts to a NEMA standard double gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is black.

The Mini-Com® Executive Series Faceplate accepts ten Mini-Com Module. The faceplate is double gang and mounts to a NEMA standard double gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is electric ivory.

The Mini-Com® Executive Series Faceplate accepts ten Mini-Com Module. The faceplate is double gang and mounts to a NEMA standard double gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is international gray.

The Mini-Com® Executive Series Faceplate accepts ten Mini-Com Module. The faceplate is double gang and mounts to a NEMA standard double gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is off white.

The Mini-Com® Executive Series Faceplate accepts ten Mini-Com Module. The faceplate is double gang and mounts to a NEMA standard double gang opening. The faceplate includes a raised rail design on the outer edge of the frame, has a label pocket for easy identification, and is white.

The Mini-Com® Classic Series Faceplate accepts two Mini-Com Modules. The faceplate has horizontal orientation and mounts to a NEMA standard single gang opening. The faceplate can be identified with adhesive label and is off white.

The Mini-Com® Classic Series Faceplate accepts two Mini-Com Modules. The faceplate has horizontal orientation and mounts to a NEMA standard single gang opening. The faceplate can be identified with adhesive label and is white.

The Mini-Com® Classic Series Faceplate accepts two Mini-Com Modules. The faceplate is sloped with horizontal orientation and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is international gray.

The Mini-Com® Classic Series Faceplate accepts two Mini-Com Modules. The faceplate is sloped with horizontal orientation and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is off white.

The Mini-Com® Classic Series Faceplate accepts one Mini-Com Module. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is electric ivory.

The Mini-Com® Classic Series Faceplate accepts one Mini-Com Module. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is off white.

The Mini-Com® Classic Series Faceplate accepts one Mini-Com Module. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is white.

The Mini-Com® Classic Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is electric ivory.

The Mini-Com® Classic Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is off white.

The Mini-Com® Classic Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is off white.

Mini-Com Stainless Steel Faceplate accepts two Mini-Com modules. The faceplate is single gang and mounts to NEMA standard single gang opening. Includes a label pocket for easy identification and is made of impact resistant material to support installations in high traffic areas. Faceplate is TAA compliant.

The Mini-Com® Stainless Steel Faceplate accepts two Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is made of impact resistant material to support installations in high traffic areas.

The Mini-Com® Classic Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is white.

The Mini-Com® Classic Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is white.

The Mini-Com® Classic Series Faceplate accepts three Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is electric ivory.

The Mini-Com® Classic Series Faceplate accepts three Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is off white.

The Mini-Com® Classic Series Faceplate accepts three Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is white.

The Mini-Com® Classic Series Faceplate accepts four Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is electric ivory.

The Mini-Com® Classic Series Faceplate accepts four Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is off white.

The Mini-Com® Classic Series Faceplate accepts four Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is off white.

The Mini-Com® Stainless Steel Faceplate accepts four Mini-Com Modules. The faceplate is double gang and mounts to a NEMA standard double gang opening. The faceplate includes a label pocket for easy identification and is made of impact resistant material to support installations in high traffic areas.

Mini-Com Stainless Steel Faceplate accepts four Mini-Com modules. The faceplate is single gang and mounts to NEMA standard single gang opening. Includes a label pocket for easy identification and is made of impact resistant material to support installations in high traffic areas. Faceplate is TAA compliant.

The Mini-Com® Stainless Steel Faceplate accepts four Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is made of impact resistant material to support installations in high traffic areas.

The Mini-Com® Classic Series Faceplate accepts four Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is white.

The Mini-Com® Classic Series Faceplate accepts four Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is white.

The Mini-Com® Classic Series Faceplate accepts six Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is electric ivory.

The Mini-Com® Classic Series Faceplate accepts six Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is off white.

The Mini-Com® Stainless Steel Faceplate accepts six Mini-Com Modules. The faceplate is double gang and mounts to a NEMA standard double gang opening. The faceplate includes a label pocket for easy identification and is made of impact resistant material to support installations in high traffic areas.

Mini-Com Stainless Steel Faceplate accepts six Mini-Com modules. The faceplate is single gang and mounts to NEMA standard single gang opening. Includes a label pocket for easy identification and is made of impact resistant material to support installations in high traffic areas. Faceplate is TAA compliant.

The Mini-Com® Stainless Steel Faceplate accepts six Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is made of impact resistant material to support installations in high traffic areas.

The Mini-Com® Classic Series Faceplate accepts six Mini-Com Modules. The faceplate is single gang and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is white.

The Mini-Com® Classic Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang, sloped and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is electric ivory.

The Mini-Com® Classic Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang, sloped and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is off white.

The Mini-Com® Stainless Steel Faceplate accepts two Mini-Com Modules. The faceplate is single gang, sloped recessed and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is made of impact resistant material to support installations in high traffic areas.

The Mini-Com® Classic Series Faceplate accepts two Mini-Com Modules. The faceplate is single gang, sloped and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is white.

The Mini-Com® Classic Series Faceplate accepts four Mini-Com Modules. The faceplate is single gang, sloped and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is electric ivory.

The Mini-Com® Classic Series Faceplate accepts four Mini-Com Modules. The faceplate is single gang, sloped and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is off white.

The Mini-Com® Stainless Steel Faceplate accepts four Mini-Com Modules. The faceplate is single gang, sloped recessed and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is made of impact resistant material to support installations in high traffic areas.

The Mini-Com® Classic Series Faceplate accepts four Mini-Com Modules. The faceplate is single gang, sloped and mounts to a NEMA standard single gang opening. The faceplate includes a label pocket for easy identification and is white.

The Mini-Com® water resistant sloped faceplate accepts four Mini-Com® modules. The faceplate is rated IP 56, is single gang and sloped, includes a hinged cover, gaskets and screws. Clear cover and gray base.

Mini Com Single gang, vertical water resistant sloped faceplate, accepts four Mini-Com® Modules, includes hinged cover and screws. Clear.

Giga-TX™ Termination Tool

Blank insert, 1/2 size, mounts to faceplate frames to reserve space for future upgrades and is off white

Blank insert, 1/3 size, mounts to faceplate frames to reserve space for future upgrades and is off white

Blank insert, 1/3 size, mounts to faceplate frames to reserve space for future upgrades and is white

Blank insert, 1/2 size, mounts to faceplate frames to reserve space for future upgrades and is white

Hooded Insert - Black

Hooded Insert - Electric Ivory

Hooded Insert - International White

Hooded Insert - White

1/3 insert with 9-pin female to female coupler, arctic white.

1/3 insert with 9-pin female to female coupler, black.

1/3 insert with 9-pin female to female coupler, electric ivory.

1/3 insert with 9-pin female to female coupler, international gray.

1/3 insert with 9-pin female to female coupler, 1/3 Insert, off white.

1/3 insert with 9-pin female to female coupler, white.

1/3 insert with 15-pin high density female to female coupler, SVGA capable, arctic white.

1/3 insert with 15-pin high density female to female coupler, SVGA capable, black.

1/3 insert with 15-pin high density female to female coupler, SVGA capable, electric ivory.

1/3 insert with 15-pin high density female to female coupler, SVGA capable, international gray.

1/3 insert with 15-pin high density female to female coupler, SVGA capable, off white.

1/3 insert with 15-pin high density female to female coupler, SVGA capable, white.

1/3 insert with one 15-pin DB connector mounted to a printed circuit board, terminates on site, SVGA capable, black.

1/3 insert with one 15-pin DB connector mounted to a printed circuit board, terminates on site, SVGA capable, electric ivory.

1/3 insert with one 15-pin DB connector mounted to a printed circuit board, terminates on site, SVGA capable, international gray.

1/3 insert with one 15-pin DB connector mounted to a printed circuit board, terminates on site, SVGA capable, off white.

1/3 insert with one 15-pin DB connector mounted to a printed circuit board, terminates on site, SVGA capable, white.

The Mini-Com® 1/3 size flat module insert, accepts one Mini-Com® module, mounts to faceplate frames and is electric ivory.

The Mini-Com® 1/3 size flat module insert, accepts one Mini-Com® module, mounts to faceplate frames and is off white.

The Mini-Com® 1/3 size flat module insert, accepts one Mini-Com® module, mounts to faceplate frames and is white.

The Mini-Com® 1/2 size flat module insert, accepts two Mini-Com® modules, mounts to faceplate frames and is off white.

The Mini-Com® 1/3 size flat module insert, accepts two Mini-Com® modules, mounts to faceplate frames and is off white.

The Mini-Com® 1/3 size flat module insert, accepts two Mini-Com® modules, mounts to faceplate frames and is white.

The Mini-Com® 1/2 size flat module insert, accepts two Mini-Com® modules, mounts to faceplate frames and is white.

The Mini-Com® adapter for Interlink frames, accepts two Mini Com modules, each adapter includes one black blank module and adapter is black.

The Mini-Com® adapter for Interlink frames, accepts two Mini Com modules, each adapter includes one black blank module and adapter is walker gray.

The Mini-Com® adapter for Interlink frames, accepts two Mini Com modules, each adapter includes one black blank module and adapter is walker ivory.

The Mini-Com® 1/2 size sloped module insert, accepts two Mini-Com® modules, mounts to faceplate frames and is black.

The Mini-Com® 1/2 size sloped module insert, accepts two Mini-Com® modules, mounts to faceplate frames and is off white.

The Mini-Com® 1/2 size sloped shuttered module insert, accepts two Mini-Com® modules, mounts to faceplate frames and is black.

The Mini-Com® 1/2 size sloped shuttered module insert, accepts two Mini-Com® modules, mounts to faceplate frames and is off white.

The Mini-Com® 1/2 size sloped shuttered module insert, accepts two Mini-Com® modules, mounts to faceplate frames and is white.

The Mini-Com® 1/2 size sloped module insert, accepts two Mini-Com® modules, mounts to faceplate frames and is white.

The air inlet duct directs cooling air from the cold aisle into the intake fans of switches. It fits in a 1 RU footprint and is designed for Cisco Nexus 9372 switch.

Cabinet Inlet Duct, Compatible with 16" - 20" Switch Depth - BL

Icon with data image, snaps in to jack modules and select faceplates. Package includes 100 blue icons (5 runners with 20 icons each)

Icon with data image, snaps in to jack modules and select faceplates. Package includes 100 green icons (5 runners with 20 icons each)

Icon with data image, snaps in to jack modules and select faceplates. Package includes 100 orange icons (5 runners with 20 icons each)

Icon with data image, snaps in to jack modules and select faceplates. Package includes 100 red icons (5 runners with 20 icons each)

Icon with data image, snaps in to jack modules and select faceplates. Package includes 100 white icons (5 runners with 20 icons each)

Icon with data image, snaps into jack modules and select faceplates. Package includes 100 yellow icons (5 runners with 20 icons each)

Icon with phone image, snaps in to jack modules and select faceplates. Package includes 100 off white icons (5 runners with 20 icons each)

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is White.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is White.

The Mini-Com® Cat 5e UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is black.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is Black.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is Blue.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is Blue.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is Electric Ivory.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is Electric Ivory.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is Green.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is Green.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is International Gray.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is International Gray.

The Mini-Com® Cat 5e UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is off white.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is Off White.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is Orange.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is Orange.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is Red.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is green.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is Violet.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is Violet.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is White.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is White.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is Yellow.

The Mini-Com® Cat 5e UTP RJ45 TG-Style Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested for continuity. Contacts are plated with 50 microinches of gold for superior performance. Jack modules are compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is Yellow.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is arctic white.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is black.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is black and includes 24 per package.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is black and includes 100 per package.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is blue.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is blue and includes 24 per package.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is blue and includes 100 per package.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is electric ivory.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is electric ivory and includes 24 per package.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is green.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is green and includes 24 per package.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is international gray.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is international gray and includes 24 per package.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is off white.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is off white and includes 24 per package.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is off white and includes 100 per package.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is orange.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is orange and includes 24 per package.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is red.

The Mini-Com® Cat 6A UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is red and includes 24 per package.