Panduit wireway fittings, page 2 of 2

The T-70 raceway base provides solutions for routing low voltage, fiber optic, and/or power cabling along perimeter walls. The T-70 raceway is supplied with pre-punched mounting holes and is tamper resistant. It is 10 ft and Off White.

The T-70 Cover Coupler is used to join sections of the raceway cover. It is Electric Ivory.

The T-70 Cover Coupler is used to join sections of the raceway cover. It is Off White.

The T-70 Cover Coupler is used to join sections of the raceway cover. It is White.

The T-70 Power Rated Raceway Cover is designed to snap on to the base to create a tamper resistant cable routing solution along perimeter walls. It is 6 ft and Electric Ivory

The T-70 Power Rated Raceway Cover is designed to snap on to the base to create a tamper resistant cable routing solution along perimeter walls. It is 8 ft and Electric Ivory

The T-70 Power Rated Raceway Cover is designed to snap on to the base to create a tamper resistant cable routing solution along perimeter walls. It is 10 ft and Electric Ivory

The T-70 Power Rated Raceway Cover is designed to snap on to the base to create a tamper resistant cable routing solution along perimeter walls. It is 8 ft and Off White

The T-70 Power Rated Raceway Cover is designed to snap on to the base to create a tamper resistant cable routing solution along perimeter walls. It is 10 ft and Off White

The T-70 Mounting Bracket, Screw-On, for T-70, PVC, International Gray, 0.05'

The T-70 Divider Wall is designed to maintain separation of cables within the raceway. It is 6 ft.

The T-70 Divider Wall is designed to maintain separation of cables within the raceway. It is 8 ft.

The T-70 Divider Wall is designed to maintain separation of cables within the raceway. It is 10 ft.

The end cap fitting is used to terminate or allow entry to T-70 raceway with conduit breakouts of 1/2". It is Black.

The end cap fitting is used to terminate or allow entry to T-70 raceway with conduit breakouts of 1/2". It is Electric Ivory.

The end cap fitting is used to terminate or allow entry to T-70 raceway with conduit breakouts of 1/2". It is Off White.

The end cap fitting is used to terminate or allow entry to T-70 raceway with conduit breakouts of 1/2". It is White.

The entrance end fitting is for use with T-70 Raceway. The color is Electric Ivory

The entrance end fitting is for use with T-70 Raceway. The color is Off White

The entrance end fitting is for use with T-70 Raceway. The color is White

The snap-on horizontal sloped communication faceplate is used with T-70 raceway. Accepts two Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, Electric Ivory.

The snap-on horizontal sloped communication faceplate is used with T-70 raceway. Accepts two Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, Off White.

The snap-on horizontal sloped communication faceplate is used with T-70 raceway. Accepts two Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, White.

The snap-on horizontal sloped communication faceplate is used with T-70 raceway. Accepts four Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, Electric Ivory.

The snap-on horizontal sloped communication faceplate is used with T-70 raceway. Accepts four Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, Off White.

The snap-on horizontal sloped communication faceplate is used with T-70 raceway. Accepts four Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, White.

The snap-on vertical sloped communication faceplate is used with T-70 raceway. Accepts two Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, Electric Ivory.

The snap-on vertical sloped communication faceplate is used with T-70 raceway. Accepts two Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, Off White.

The snap-on vertical sloped communication faceplate is used with T-70 raceway. Accepts two Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, White.

The snap-on vertical sloped communication faceplate is used with T-70 raceway. Accepts four Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, Electric Ivory.

The snap-on vertical sloped communication faceplate is used with T-70 raceway. Accepts four Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, Off White.

The snap-on vertical sloped communication faceplate is used with T-70 raceway. Accepts four Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, White.

The T-70 Surface Raceway, 3-Sided Hanging Box is designed for use with Single-Gang Electrical Outlets

The T-70 Surface Raceway, Hanging Box is designed for use with Single-Gang Electrical Outlets

The inside corner fitting is used to join sections of T-70 raceway at inside corners while maintaining proper separation of data and power. It is Electric Ivory.

The inside corner fitting is used to join sections of T-70 raceway at inside corners. Off White.

The inside corner fitting is used to join sections of T-70 raceway at inside corners while maintaining proper separation of data and power. It is White.

The outside corner fitting is used to join sections of T-70 raceway at outside corners while maintaining separation of power and data. It is Electric Ivory.

The outside corner fitting is used to join sections of T-70 raceway at outside corners while maintaining separation of power and data. It is Off White.

The outside corner fitting is used to join sections of T-70 raceway at outside corners while maintaining separation of power and data. It is White.

The snap-on single gang 106 duplex electrical/communication faceplate is used to cover one NEMA standard 106 duplex electrical outlet. In communication applications, covers one standard 106 duplex communication module frame, Electric Ivory.

The snap-on single gang rectangular electrical/communication faceplate is used to cover one NEMA standard rectangular electrical outlet. In communication applications, covers one standard rectangular communication module frame, Electric Ivory.

The snap-on single gang rectangular electrical/communication faceplate is used to cover one NEMA standard rectangular electrical outlet. In communication applications, covers one standard rectangular communication module frame, Off White.

The snap-on single gang rectangular electrical/communication faceplate is used to cover one NEMA standard rectangular electrical outlet. In communication applications, covers one standard rectangular communication module frame, White.

The snap-on single gang 106 duplex electrical/communication faceplate is used to cover one NEMA standard 106 duplex electrical outlet. In communication applications, covers one standard 106 duplex communication module frame, Off White.

The snap-on single gang 106 duplex electrical/communication faceplate is used to cover one NEMA standard 106 duplex electrical outlet. In communication applications, covers one standard 106 duplex communication module frame, White.

The right angle fitting is used to join sections of T-70 raceway at right angles while maintain proper separation of power and data. It is Electric Ivory.

The right angle fitting is used to join sections of T-70 raceway at right angles while maintaining proper separation of power and data. It is White.

The screw-on faceplate bracket allows for the attachment of screw-on faceplates to T-70 raceway.

The T-70 tee fitting divider separates power and data within tee fitting.

The T-70 snap-on tee fitting extends cable runs in a tee configuration. It is Electric Ivory.

Tee Fitting, Snap-On, for T-70/T-45, PVC, Off White, 0.54'

The snap-on transition fitting cover is for use with LD, LDPH, T-70 and T45 raceways. It is Electric Ivory.

The snap-on transition fitting cover is for use with LD, LDPH, T-70 and T45 raceways. It is Off White.

The snap-on transition fitting cover is for use with LD, LDPH, T-70 and T45 raceways. It is White.

The snap-on transition fitting is for use with LD, LDPH, T-70 and T45 raceways. It is Electric Ivory.

The snap-on transition fitting is for use with LD, LDPH, T-70 and T45 raceways. It is Electric Ivory.

The snap-on transition fitting is for use with LD, LDPH, T-70 and T45 raceways. It is Electric Ivory.

The T-70 snap-on tee fitting extends cable runs in a tee configuration. It is White.

The T-70 offset box for snap on faceplates and is 2" tall. It is Electric Ivory.

The T-70 offset box for snap on faceplates and is 2" tall. It is Off White.

The T-70 offset box for snap on faceplates and is 2" tall. It is White.

The T-70 offset box for screw on faceplates and is 2" tall. It is Electric Ivory.

The T-70 offset box for screw on faceplates and is 2" tall. It is Off White.

The T-70 offset box for screw on faceplates and is 2" tall. It is White.

The T-70 Wire retainer provides Solutions for Routing Low Voltage, Fiber Optic and/or Power Cabling Along Perimeter Walls. T-70 Features the Workstation Outlet Center ™ Offset Box, Which Provides an Offset Solution to Maximize Channel Capacity and Outlet Density.

The low voltage tee fitting extends cable runs in a tee configuration and is used with LD3 raceway, in applications up to 50 V. It meets TIA/EIA and is Electric Ivory.

The low voltage tee fitting extends cable runs in a tee configuration and is used with LD3 raceway, in applications up to 50 V. It meets TIA/EIA and is Off White.

The low voltage tee fitting extends cable runs in a tee configuration and is used with LD3 raceway, in applications up to 50 V. It meets TIA/EIA and is White.

The low voltage tee fitting extends cable runs in a tee configuration and is used with LD5 raceway, in applications up to 50 V. It meets TIA/EIA and is Electric Ivory.

The low voltage tee fitting extends cable runs in a tee configuration and is used with LD5 raceway, in applications up to 50 V. It meets TIA/EIA and is International Gray.

The low voltage tee fitting extends cable runs in a tee configuration and is used with LD5 raceway, in applications up to 50 V. It meets TIA/EIA and is Off White.

The low voltage tee fitting extends cable runs in a tee configuration and is used with LD5 raceway, in applications up to 50 V. It meets TIA/EIA and is White.

The low voltage tee fitting extends cable runs in a tee configuration and is used with LD10 raceway, in applications up to 50 V. It meets TIA/EIA and is Electric Ivory.

The low voltage tee fitting extends cable runs in a tee configuration and is used with LD10 raceway, in applications up to 50 V. It meets TIA/EIA and is International Gray.

The low voltage tee fitting extends cable runs in a tee configuration and is used with LD10 raceway, in applications up to 50 V. It meets TIA/EIA and is Off White.

The low voltage tee fitting extends cable runs in a tee configuration and is used with LD10 raceway, in applications up to 50 V. It meets TIA/EIA and is White.

The tee fitting extends cable runs in a tee configuration and is used with LD3 raceway, in applications up to 50 V. It meets TIA/EIA and is Electric Ivory.

The tee fitting extends cable runs in a tee configuration and is used with LD3 raceway, in applications up to 50 V. It meets TIA/EIA and is Off White.

The tee fitting extends cable runs in a tee configuration and is used with LD3 raceway, in applications up to 50 V. It meets TIA/EIA and is White.

The tee fitting extends cable runs in a tee configuration and is used with LD5 raceway, in applications up to 50 V. It meets TIA/EIA and is Electric Ivory.

The tee fitting extends cable runs in a tee configuration and is used with LD5 raceway, in applications up to 50 V. It meets TIA/EIA and is Off White.

The tee fitting extends cable runs in a tee configuration and is used with LD5 raceway, in applications up to 50 V. It meets TIA/EIA and is White.

The tee fitting extends cable runs in a tee configuration and is used with LD10 raceway, in applications up to 50 V. It meets TIA/EIA and is Electric Ivory.

The tee fitting extends cable runs in a tee configuration and is used with LD10 raceway, in applications up to 50 V. It meets TIA/EIA and is International Gray.

The tee fitting extends cable runs in a tee configuration and is used with LD10 raceway, in applications up to 50 V. It meets TIA/EIA and is Off White.

The tee fitting extends cable runs in a tee configuration and is used with LD10 raceway, in applications up to 50 V. It meets TIA/EIA and is White.

The power rated tee fitting extends cable runs in a tee configuration and is used with LDPH3 raceway. It is Electric Ivory.

The power rated tee fitting extends cable runs in a tee configuration and is used with LDPH3 raceway. It is Off White.

The power rated tee fitting extends cable runs in a tee configuration and is used with LDPH3 raceway. It is White.

The power rated tee fitting extends cable runs in a tee configuration and is used with LDPH10 raceway. It is Electric Ivory.

The power rated tee fitting extends cable runs in a tee configuration and is used with LDPH10 raceway. It is International Gray.

The power rated tee fitting extends cable runs in a tee configuration and is used with LDPH10 raceway. It is Off White.

The power rated tee fitting extends cable runs in a tee configuration and is used with LDPH10 raceway. It is White.