Panduit wireway fittings, page 1 of 2

The conduit entrance end fitting is a power rated two-piece fitting, designed to accommodate the entrance of 1/2" conduit or align with knockouts on surface mount electrical boxes. For use with LD3/LDPH3 and has breakouts available to work with LD5/LDPH5 and LD10/LDPH10. Cover and base snap together – no hardware is required. Electric Ivory

The conduit entrance end fitting is a power rated two-piece fitting, designed to accommodate the entrance of 1/2" conduit or align with knockouts on surface mount electrical boxes. For use with LD3/LDPH3 and has breakouts available to work with LD5/LDPH5 and LD10/LDPH10. Cover and base snap together – no hardware is required. Off White

The conduit entrance end fitting is a power rated two-piece fitting, designed to accommodate the entrance of 1/2" conduit or align with knockouts on surface mount electrical boxes. For use with LD3/LDPH3 and has breakouts available to work with LD5/LDPH5 and LD10/LDPH10. Cover and base snap together – no hardware is required. White

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD3 Surface Raceway and is a 1.5 inch length. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Electric Ivory.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD3 Surface Raceway and is a 2 inch length. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Off White.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD3 Surface Raceway and is a 2 inch length. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is White.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD5 Surface Raceway and is a 2 inch length. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Electric Ivory.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD10 Surface Raceway and is a 2 inch length. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is International Gray.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD5 Surface Raceway and is a 2 inch length. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Off White.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD5 Surface Raceway and is a 2 inch length. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is White.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD10 Surface Raceway and is a 2 inch length. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Electric Ivory.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD10 Surface Raceway and is a 2 inch length. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is International Gray.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD10 Surface Raceway and is a 2 inch length. It meets TIA/EIA, uesd in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Off White.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD10 Surface Raceway and is a 2 inch length. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is White.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD3, and LDPH3 Surface Raceway and is a 1 inch length. . It meets TIA/EIA Standards, is UL Listed and Compliant. It features a snap-on installation, is made of ABS plastic and is Electric Ivory.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD3, and LDPH3 Surface Raceway and is a 1 inch length. . It meets TIA/EIA Standards, is UL Listed and Compliant. It features a snap-on installation, is made of ABS plastic and is Off White.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD3, and LDPH3 Surface Raceway and is a 1 inch length. . It meets TIA/EIA Standards, is UL Listed and Compliant. It features a snap-on installation, is made of ABS plastic and is White.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD5, and LDPH5 Surface Raceway and is a 1 inch length. . It meets TIA/EIA Standards, is UL Listed and Compliant. It features a snap-on installation, is made of ABS plastic and is Electric Ivory.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD5, and LDPH5 Surface Raceway and is a 1 inch length. . It meets TIA/EIA Standards, is UL Listed and Compliant. It features a snap-on installation, is made of ABS plastic and is Off White.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD5, and LDPH5 Surface Raceway and is a 1 inch length. . It meets TIA/EIA Standards, is UL Listed and Compliant. It features a snap-on installation, is made of ABS plastic and is White.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD10, and LDPH10 Surface Raceway and is a 1.24 inch length. . It meets TIA/EIA Standards, is UL Listed and Compliant. It features a snap-on installation, is made of ABS plastic and is Electric Ivory.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD10, and LDPH10 Surface Raceway and is a 1.24 inch length. . It meets TIA/EIA Standards, is UL Listed and Compliant. It features a snap-on installation, is made of ABS plastic and is International Gray.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD10, and LDPH10 Surface Raceway and is a 1.24 inch length. . It meets TIA/EIA Standards, is UL Listed and Compliant. It features a snap-on installation, is made of ABS plastic and is Off White.

The coupler fitting is used to efficiently manage cable placement. It is designed to be used with LD10, and LDPH10 Surface Raceway and is a 1.24 inch length. . It meets TIA/EIA Standards, is UL Listed and Compliant. It features a snap-on installation, is made of ABS plastic and is White.

The screw-on single gang rectangular faceplate covers one NEMA standard rectangular electrical outlet or one standard rectangular communication module frame, Electric Ivory.

The screw-on single gang rectangular faceplate covers one NEMA standard rectangular electrical outlet or one standard rectangular communication module frame, Off White

The screw-on single gang rectangular faceplate covers one NEMA standard rectangular electrical outlet or one standard rectangular communication module frame, White

The screw-on single gang rectangular faceplate covers one NEMA standard rectangular electrical outlet or one standard rectangular communication module frame, Electric Ivory.

The screw-on single gang rectangular faceplate covers one NEMA standard rectangular electrical outlet or one standard rectangular communication module frame, Off White.

The screw-on single gang rectangular faceplate covers one NEMA standard rectangular electrical outlet or one standard rectangular communication module frame, White

The four way cross fitting is used with LD5, and LDPH5 raceway, ABS, Length 4.05 in, Width 4.05 in. UL Listed. Off White

The power rated drop ceiling/entrance end fitting is used with LD10 and LDPH10 raceway. PVC, Length 4.1 in, Electric Ivory

The power rated drop ceiling/entrance end fitting is used with LD10 and LDPH10 raceway. PVC, Length 4.1 in, Off White

The power rated drop ceiling/entrance end fitting is used with LD10 and LDPH10 raceway. PVC, Length 4.1 in, White

The drop ceiling/entrance end fitting allows for running cable directly from the ceiling. It is designed to be used with the LD3 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Electric Ivory.

The drop ceiling/entrance end fitting allows for running cable directly from the ceiling. It is designed to be used with the LD3 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Off White.

The drop ceiling/entrance end fitting allows for running cable directly from the ceiling. It is designed to be used with the LD3 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is White.

The drop ceiling/entrance end fitting allows for running cable directly from the ceiling. It is designed to be used with the LD5 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Electric Ivory.

The drop ceiling/entrance end fitting allows for running cable directly from the ceiling. It is designed to be used with the LD5 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is International Gray.

The drop ceiling/entrance end fitting allows for running cable directly from the ceiling. It is designed to be used with the LD5 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Off White.

The drop ceiling/entrance end fitting allows for running cable directly from the ceiling. It is designed to be used with the LD5 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is White.

The drop ceiling/entrance end fitting allows for running cable directly from the ceiling. It is designed to be used with the LD10 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Electric Ivory.

The drop ceiling/entrance end fitting allows for running cable directly from the ceiling. It is designed to be used with the LD10 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is International Gray.

The drop ceiling/entrance end fitting allows for running cable directly from the ceiling. It is designed to be used with the LD10 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Off White.

The drop ceiling/entrance end fitting allows for running cable directly from the ceiling. It is designed to be used with the LD10 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is White.

The end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD3 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Electric Ivory.

The end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD3 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Off White.

The end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD3 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is White.

The end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD5 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Electric Ivory.

The end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD5 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is International Gray.

The end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD5 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Off White.

The end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD5 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is White.

The end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD10 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Electric Ivory.

The end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD10 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is International Gray.

The end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD10 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is Off White.

The end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD10 Surface raceway. It meets TIA/EIA, used in applications up to 50 V. It features a snap-on installation, is made of ABS plastic, and is White.

The power rated end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD3 and LDPH3 Surface Raceway. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant and rated to 600V. It features a snap-on installation, is made of ABS plastic and is Electric Ivory.

The power rated end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD3 and LDPH3 Surface Raceway. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant and rated to 600V. It features a snap-on installation, is made of ABS plastic and is Off White.

The power rated end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD3 and LDPH3 Surface Raceway. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant and rated to 600V. It features a snap-on installation, is made of ABS plastic and is White.

The power rated end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD5 and LDPH5 Surface Raceway. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant and rated to 600V. It features a snap-on installation, is made of ABS plastic and is Electric Ivory.

The power rated end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD5 and LDPH5 Surface Raceway. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant and rated to 600V. It features a snap-on installation, is made of ABS plastic and is Off White.

The power rated end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD5 and LDPH5 Surface Raceway. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant and rated to 600V. It features a snap-on installation, is made of ABS plastic and is White.

The power rated end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD10 and LDPH10 Surface Raceway. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant and rated to 600V. It features a snap-on installation, is made of ABS plastic and is Electric Ivory.

The power rated end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD10 and LDPH10 Surface Raceway. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant and rated to 600V. It features a snap-on installation, is made of ABS plastic and International Gray.

The power rated end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD10 and LDPH10 Surface Raceway. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant and rated to 600V. It features a snap-on installation, is made of ABS plastic and is Off White.

The power rated end cap fitting allows for closing off one end of the Surface Raceway when you no longer need to run cables. It is designed to be used with the LD10 and LDPH10 Surface Raceway. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant and rated to 600V. It features a snap-on installation, is made of ABS plastic and is White.

The fire box adapter is designed for use with LD5/LDPH5 profile raceway. The adapter is designed specifically for low voltage applications only and is Electric Ivory.

The fire box adapter is designed for use with LD5/LDPH5 profile raceway. The adapter is designed specifically for low voltage applications only and is Off White

The fire box adapter is designed for use with LD5/LDPH5 profile raceway. The adapter is designed specifically for low voltage applications only and is White

The Flexible Magnetic Strip is designed for use with LD raceway and is used to apply raceway to metal surfaces and is 1" in width and 6 ft in length.

The inside corner fitting is used to efficiently run cables along an inside corner. It has a 90° angle and is designed to be used with the LD3 or LDPH3 raceway and features a snap-on installation. Electric Ivory.

The inside corner fitting is used to efficiently run cables along an inside corner. It has a 90° angle and is designed to be used with the LD3 or LDPH3 raceway and features a snap-on installation. Off White.

The inside corner fitting is used to efficiently run cables along an inside corner. It has a 90° angle and is designed to be used with the LD3 or LDPH3 raceway and features a snap-on installation. White.

The inside corner fitting is used to efficiently run cables along an inside corner. It has a 90° angle and is designed to be used with the LD5 or LDPH5 raceway and features a snap-on installation. Electric Ivory.

The inside corner fitting is used to efficiently run cables along an inside corner. It has a 90° angle and is designed to be used with the LD5 or LDPH5 raceway and features a snap-on installation. International Gray.

The inside corner fitting is used to efficiently run cables along an inside corner. It has a 90° angle and is designed to be used with the LD5 or LDPH5 raceway and features a snap-on installation. Off White.

The inside corner fitting is used to efficiently run cables along an inside corner. It has a 90° angle and is designed to be used with the LD5 or LDPH5 raceway and features a snap-on installation. White.

The inside corner fitting is used to efficiently run cables along an inside corner. It has a 90° angle and is designed to be used with the LD10 or LDPH10 raceway and features a snap-on installation. Electric Ivory.

The inside corner fitting is used to efficiently run cables along an inside corner. It has a 90° angle and is designed to be used with the LD10 or LDPH10 raceway and features a snap-on installation. International Gray.

The inside corner fitting is used to efficiently run cables along an inside corner. It has a 90° angle and is designed to be used with the LD10 or LDPH10 raceway and features a snap-on installation. White.

The inside corner fitting is used to efficiently run cables along an inside corner. It has a 90° angle and is designed to be used with the LD10 or LDPH10 raceway and features a snap-on installation. White

The Inside Corner fitting is used to efficiently run cables along an inside corner while maintaining proper bend radius. It is designed to be used with LD5 or LDPH5 raceway and features a snap-on installation. Electric Ivory.

The Inside Corner fitting is used to efficiently run cables along an inside corner while maintaining proper bend radius. It is designed to be used with LD5 or LDPH5 raceway and features a snap-on installation. Off White.

The Inside Corner fitting is used to efficiently run cables along an inside corner while maintaining proper bend radius. It is designed to be used with LD5 or LDPH5 raceway and features a snap-on installation. White.

The Inside Corner fitting is used to efficiently run cables along an inside corner while maintaining proper bend radius. It is designed to be used with LD5 or LDPH5 raceway and features a snap-on installation. Electric Ivory.

The Inside Corner fitting is used to efficiently run cables along an inside corner while maintaining proper bend radius. It is designed to be used with LD5 or LDPH5 raceway and features a snap-on installation. Off White.

The Inside Corner fitting is used to efficiently run cables along an inside corner while maintaining proper bend radius. It is designed to be used with LD5 or LDPH5 raceway and features a snap-on installation. White.

The Inside Corner fitting is used to efficiently run cables along an inside corner while maintaining proper bend radius. It is designed to be used with LD5 or LDPH5 raceway and features a snap-on installation. Electric Ivory.

The Inside Corner fitting is used to efficiently run cables along an inside corner while maintaining proper bend radius. It is designed to be used with LD5 or LDPH5 raceway and features a snap-on installation. International Gray.

The Inside Corner fitting is used to efficiently run cables along an inside corner while maintaining proper bend radius. It is designed to be used with LD5 or LDPH5 raceway and features a snap-on installation. Off White.

The Inside Corner fitting is used to efficiently run cables along an inside corner while maintaining proper bend radius. It is designed to be used with LD5 or LDPH5 raceway and features a snap-on installation. White.

The power rated inside corner fitting is used to efficiently run cables along an inside corner while maintaining a 1 inch bend radius. It is designed to be used with the LDPH3 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is made of ABS plastic and is Electric Ivory.

The power rated inside corner fitting is used to efficiently run cables along an inside corner while maintaining a 1 inch bend radius. It is designed to be used with the LDPH3 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is made of ABS plastic and is international White.

The power rated inside corner fitting is used to efficiently run cables along an inside corner while maintaining a 1 inch bend radius. It is designed to be used with the LDPH3 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is made of ABS plastic and is White.

The power rated inside corner fitting is used to efficiently run cables along an inside corner while maintaining a 1 inch bend radius. It is designed to be used with the LDPH5 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is made of ABS plastic and is Electric Ivory.

The power rated inside corner fitting is used to efficiently run cables along an inside corner while maintaining a 1 inch bend radius. It is designed to be used with the LDPH5 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is made of ABS plastic and is international White.

The power rated inside corner fitting is used to efficiently run cables along an inside corner while maintaining a 1 inch bend radius. It is designed to be used with the LDPH5 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is made of ABS plastic and is White.

The power rated inside corner fitting is used to efficiently run cables along an inside corner while maintaining a 1 inch bend radius. It is designed to be used with the LDPH10 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is made of ABS plastic and is Electric Ivory.

The power rated inside corner fitting is used to efficiently run cables along an inside corner while maintaining a 1 inch bend radius. It is designed to be used with the LDPH10 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is made of ABS plastic and is International Gray.

The power rated inside corner fitting is used to efficiently run cables along an inside corner while maintaining a 1 inch bend radius. It is designed to be used with the LDPH10 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is made of ABS plastic and is international White.

The power rated inside corner fitting is used to efficiently run cables along an inside corner while maintaining a 1 inch bend radius. It is designed to be used with the LDPH10 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is made of ABS plastic and is White.

The Low Voltage Surface Mount Outlet Box is a one-gang style box designed for low voltage applications. It is made to be used with the Pan-Way® LD profile raceway. The Low Voltage Surface Mount Outlet Box features breakout for ½”, ¾”, or 1” diameter conduit as well as an adhesive backing. It accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. It measures 5.23" L x 3.48" W x 2.75" H (133.0mm x 88.5mm x 69.8mm). It is made of ABS plastic and is Electric Ivory.

The Low Voltage Surface Mount Outlet Box is a one-gang style box designed for low voltage applications. It is made to be used with the Pan-Way® LD profile raceway. The Low Voltage Surface Mount Outlet Box features breakout for ½”, ¾”, or 1” diameter conduit as well as an adhesive backing. It accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. It measures 5.23" L x 3.48" W x 2.75" H (133.0mm x 88.5mm x 69.8mm). It is made of ABS plastic and is Off White.

The Low Voltage Surface Mount Outlet Box is a one-gang style box designed for low voltage applications. It is made to be used with the Pan-Way® LD profile raceway. The Low Voltage Surface Mount Outlet Box features breakout for ½”, ¾”, or 1” diameter conduit as well as an adhesive backing. It accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. It measures 5.23" L x 3.48" W x 2.75" H (133.0mm x 88.5mm x 69.8mm). It is made of ABS plastic and is White.

The Low Voltage Surface Mount Outlet Box is a one-gang style box designed for low voltage applications. It is made to be used with the Pan-Way® LD profile raceway. The Low Voltage Surface Mount Outlet Box features breakout for ½”, ¾”, or 1” diameter conduit as well as an adhesive backing. It accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. It measures5.09" L x 3.34" W x 1.75" H (129.3mm x 84.8mm x 19.1mm). It is made of ABS plastic and is Electric Ivory.

The Low Voltage Surface Mount Outlet Box is a one-gang style box designed for low voltage applications. It is made to be used with the Pan-Way® LD profile raceway. The Low Voltage Surface Mount Outlet Box features breakout for ½”, ¾”, or 1” diameter conduit as well as an adhesive backing. It accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. It measures5.09" L x 3.34" W x 1.75" H (129.3mm x 84.8mm x 19.1mm). It is made of ABS plastic and is Off White.

The Low Voltage Surface Mount Outlet Box is a one-gang style box designed for low voltage applications. It is made to be used with the Pan-Way® LD profile raceway. The Low Voltage Surface Mount Outlet Box features breakout for ½”, ¾”, or 1” diameter conduit as well as an adhesive backing. It accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. It measures5.09" L x 3.34" W x 1.75" H (129.3mm x 84.8mm x 19.1mm). It is made of ABS plastic and is White.

The power rated junction box is designed to be used with any Panduit Surface Raceway. It is compatible with standard NEMA single gang screw-on faceplates. It measures 5.19 inches L x 3.45 inches W x 2.75 inches H (131.9mm x 87.7mm x 69.8mm). It is made of ABS plastic and is Electric Ivory.

The power rated junction box is designed to be used with any Panduit Surface Raceway. It is compatible with standard NEMA single gang screw-on faceplates. It measures 5.19 inches L x 3.45 inches W x 2.75 inches H (131.9mm x 87.7mm x 69.8mm). It is made of ABS plastic and is Off White.

The power rated junction box is designed to be used with any Panduit Surface Raceway. It is compatible with standard NEMA single gang screw-on faceplates. It measures 5.19 inches L x 3.45 inches W x 2.75 inches H (131.9mm x 87.7mm x 69.8mm). It is made of ABS plastic and is White.

The power rated single gang two-piece screw together extension outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 4.99"L x 3.30"W x 1.00"H (126.7mm x 83.8mm x 25.4mm). Breakouts for 1/2", 3/4", or 1" diameter conduit, Electric Ivory.

The power rated single gang two-piece screw together outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.19"L x 3.45"W x 1.75"H (131.9mm x 87.7mm x 44.4mm). Breakouts for 1/2", 3/4", or 1" diameter conduit. Electric Ivory

The power rated single gang two-piece screw together outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.19"L x 3.45"W x 1.75"H (131.9mm x 87.7mm x 44.4mm). Breakouts for 1/2", 3/4", or 1" diameter conduit. Off White.

The power rated single gang two-piece screw together outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.19"L x 3.45"W x 1.75"H (131.9mm x 87.7mm x 44.4mm). Breakouts for 1/2", 3/4", or 1" diameter conduit. White.

The single gang power rated two-piece snap together outlet box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD, LDP, LDPH, LDS profile raceways. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diameter conduit, Electric Ivory.

The single gang power rated two-piece snap together outlet box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD, LDP, LDPH, LDS profile raceways. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diameter conduit, Off White.

The single gang power rated two-piece snap together outlet box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD, LDP, LDPH, LDS profile raceways. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diameter conduit, White.

The power rated single gang two-piece screw together, intermediate outlet box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.12"L x 3.38"W x 2.27"H (130.2mm x 86.0mm x 57.7mm). Breakouts for 1/2" or 3/4" diameter conduit. Electric Ivory.

The power rated single gang two-piece screw together, intermediate outlet box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.12"L x 3.38"W x 2.27"H (130.2mm x 86.0mm x 57.7mm). Breakouts for 1/2" or 3/4" diameter conduit. Off White

The power rated single gang two-piece screw together outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.19"L x 3.45"W x 1.75"H (131.9mm x 87.7mm x 44.4mm). Breakouts for 1/2", 3/4", or 1" diameter conduit. Off White

The power rated single gang single gang two-piece screw together intermediate outlet box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.12"L x 3.38"W x 2.27"H (130.2mm x 86.0mm x 57.7mm). Breakouts for 1/2" or 3/4" diameter conduit. White.

The power rated single gang two-piece screw together outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.19"L x 3.45"W x 1.75"H (131.9mm x 87.7mm x 44.4mm). Breakouts for 1/2", 3/4", or 1" diameter conduit. White

The power rated junction box is designed to be used with any Panduit LD profile Surface Raceway. It is compatible with standard double gang NEMA screw-on faceplates. It is a double gang box and measures 5.19 inches L x 5.19 inches W x 2.75 inches H (131.9mm x 131.9mm x 69.8mm). It is made of PVC material and is Electric Ivory.

The power rated junction box is designed to be used with any Panduit LD profile Surface Raceway. It is compatible with standard double gang NEMA screw-on faceplates. It is a double gang box and measures 5.19 inches L x 5.19 inches W x 2.75 inches H (131.9mm x 131.9mm x 69.8mm). It is made of PVC material and is Off White.

The power rated junction box is designed to be used with any Panduit LD profile Surface Raceway. It is compatible with standard double gang NEMA screw-on faceplates. It is a double gang box and measures 5.19 inches L x 5.19 inches W x 2.75 inches H (131.9mm x 131.9mm x 69.8mm). It is made of PVC material and is White.

The Double gang two-piece screw together outlet box accepts Pan-Way® Screw-On Faceplates or any NEMA standard double gang faceplates. For use with Pan-Way® LD profile raceway. 5.05"L x 5.05"W x 1.62"H (128.2mm x 128.2mm x 41.1mm). Breakouts for 1/2" or 3/4" diameter conduit, Electric Ivory.

The Fast-Snap™ Double Gang Power Rated Two-Piece Snap together Outlet Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD profile raceway. 5.00"L x 6.14"W x 1.62"H (127.1mm x 155.9mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diameter conduit, Electric Ivory

The Fast-Snap™ Double Gang Power Rated Two-Piece Snap together Outlet Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD profile raceway. 5.00"L x 6.14"W x 1.62"H (127.1mm x 155.9mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diameter conduit, Off White

The Fast-Snap™ Double Gang Power Rated Two-Piece Snap together Outlet Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD profile raceway. 5.00"L x 6.14"W x 1.62"H (127.1mm x 155.9mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diameter conduit, White

The double gang two-piece screw together outlet box accepts Pan-Way® Screw-On Faceplates or any NEMA standard double gang faceplates. For use with Pan-Way® LD profile raceway. 5.05"L x 5.05"W x 1.62"H (128.2mm x 128.2mm x 41.1mm). Breakouts for 1/2" or 3/4" diameter conduit, Off White.

The double gang two-piece screw together divided outlet box accepts Pan-Way® Screw-On Faceplates or any NEMA standard double gang faceplate. For use with Pan-Way® T-45 or LD profile raceway. 5.05"L x 5.05"W x 1.62"H (128.2mm x 128.2mm x 41.1mm). Breakouts for 1/2" or 3/4" diameter conduit. Electric Ivory

The double gang two-piece screw together divided outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard double gang faceplate. For use with Pan-Way® T-45 or LD profile raceway. 5.05"L x 5.05"W x 1.62"H (128.2mm x 128.2mm x 41.1mm). Breakouts for 1/2" or 3/4" diameter conduit. Off White

The double gang two-piece screw together divided outlet box accepts Pan-Way® Screw-On Faceplates or any NEMA standard double gang faceplate. For use with Pan-Way® T-45 or LD profile raceway. 5.05"L x 5.05"W x 1.62"H (128.2mm x 128.2mm x 41.1mm). Breakouts for 1/2" or 3/4" diameter conduit. White

The double gang two-piece screw together outlet box accepts Pan-Way® Screw-On Faceplates or any NEMA standard double gang faceplates. For use with Pan-Way® LD profile raceway. 5.05"L x 5.05"W x 1.62"H (128.2mm x 128.2mm x 41.1mm). Breakouts for 1/2" or 3/4" diameter conduit, White.

The three gang, two-piece screw together, Deep outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard three gang faceplates. For use with Pan-Way® LD, LDPH or T-45 Surface Raceway systems. 7.00in L x 5.19in W x 2.75in H (177.9mm x 131.9mm x 69.8mm). Breakouts for 1/2in, 3/4in and 1in diameter conduit, Electric Ivory.

The three gang, two-piece screw together, Deep outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard three gang faceplates. For use with Pan-Way® LD, LDPH or T-45 Surface Raceway systems. 7.00in L x 5.19in W x 2.75in H (177.9mm x 131.9mm x 69.8mm). Breakouts for 1/2in, 3/4in and 1in diameter conduit, Off White.

The three gang, two-piece screw together, Deep outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard three gang faceplates. For use with Pan-Way® LD, LDPH or T-45 Surface Raceway systems. 7.00in L x 5.19in W x 2.75in H (177.9mm x 131.9mm x 69.8mm). Breakouts for 1/2in, 3/4in and 1in diameter conduit, White.

The low voltage junction box for Surface Raceway is a one gang snap together outlet box designed for low voltage applications. It is made to be used with the T45 or LD profile raceway. It accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. It measures 5 inches L x 3.26 inches W x 1.62 inches H (127.1mm x 82.7mm x 41.1mm). It is made of PVC material and is Electric Ivory.

The low voltage junction box for Surface Raceway is a one gang snap together outlet box designed for low voltage applications. It is made to be used with the T45 or LD profile raceway. It accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. It measures 5 inches L x 3.26 inches W x 1.62 inches H (127.1mm x 82.7mm x 41.1mm). It is made of PVC material and is Off White.

The low voltage junction box for Surface Raceway is a one gang snap together outlet box designed for low voltage applications. It is made to be used with the T45 or LD profile raceway. It accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. It measures 5 inches L x 3.26 inches W x 1.62 inches H (127.1mm x 82.7mm x 41.1mm). It is made of PVC material and is White.

The LD3 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 6 feet in length and is 0.77 inches wide by 0.46 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is Off White.

The LD3 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 6 feet in length and is 0.77 inches wide by 0.46 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is White.

The LD3 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 0.77 inches wide by 0.46 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is White.

Do Not Display on Web

The LD5 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 6 feet in length and is 1.01 inches wide by 0.58 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is Electric Ivory.

The LD5 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 1.01 inches wide by 0.58 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is Electric Ivory.

The LD5 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 6 feet in length and is 1.01 inches wide by 0.58 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is Off White.

The LD5 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 1.01 inches wide by 0.58 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is Off White.

The LD5 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 10 feet in length and is 1.01 inches wide by 0.58 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is Off White.

The LD5 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 6 feet in length and is 1.01 inches wide by 0.58 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is White.

The LD5 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 1.01 inches wide by 0.58 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is White.

The LD5 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 10 feet in length and is 1.01 inches wide by 0.58 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is White.

The LD10 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 6 feet in length and is 1.5 inches wide by 0.94 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is Electric Ivory.

The LD10 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 1.5 inches wide by 0.94 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is Electric Ivory.

The LD10 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 6 feet in length and is 1.5 inches wide by 0.94 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is Off White.

The LD10 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 1.5 inches wide by 0.94 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is Off White.

The LD10 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 10 feet in length and is 1.5 inches wide by 0.94 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is Off White.

The LD10 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 6 feet in length and is 1.5 inches wide by 0.94 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is White.

The LD10 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 1.5 inches wide by 0.94 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is White.

The LD10 Surface Raceway channel is a one-piece latching channel with integrated cover and is designed to route, protect, and conceal data, voice, and video cabling. It features a factory-applied adhesive backing for fast mounting. It is 10 feet in length and is 1.5 inches wide by 0.94 inches deep. It meets TIA/EIA, used in applications up to 50 V. It is constructed of rigid PVC and is White.

The LDPH3 power rated Surface Raceway is a two-piece latching raceway with cover suitable for applications up to 600 V. It features pre-punched mounting holes and factory-applied adhesive backing for fast mounting. It is 6 feet in length and is 0.75 inches wide by 0.41 inches deep. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant. It is Off White.

The LDPH5 power rated Surface Raceway is a two-piece latching raceway with cover suitable for applications up to 600 V. It features pre-punched mounting holes and factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 1.02 inches wide by 0.55 inches deep. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant. It is Off White.

The LDPH5 power rated Surface Raceway is a two-piece latching raceway with cover suitable for applications up to 600 V. It features pre-punched mounting holes and factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 1.02 inches wide by 0.55 inches deep. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant. It is White.

The LDPH10 power rated Surface Raceway is a two-piece latching raceway with cover suitable for applications up to 600 V. It features pre-punched mounting holes and factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 1.52 inches wide by 0.86 inches deep. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant. It is International Gray.

The LDPH10 power rated Surface Raceway is a two-piece latching raceway with cover suitable for applications up to 600 V. It features pre-punched mounting holes and factory-applied adhesive backing for fast mounting. It is 8 feet in length and is 1.52 inches wide by 0.86 inches deep. It meets TIA/EIA Standards, is UL5A Listed, and is UL Compliant. It is Off White.

The LD3 mounting strap can be used as a coupler between LD3 raceway sections to provide tamper resistance. The LD3 mounting strap is 2.16 inches long, made of ABS plastic, and is Off White.

The LD5 mounting strap can be used as a coupler between LD5 raceway sections to provide tamper resistance. The LD5 mounting strap is 2.38 inches long, made of ABS plastic, and is Off White.

The LD5 mounting strap can be used as a coupler between LD5 raceway sections to provide tamper resistance. The LD5 mounting strap is 2.38 inches long, made of ABS plastic, and is White.

The outside corner fitting is a Surface Raceway fitting designed to transition your raceway around an outside corner while maintaining a 1 inch bend radius. It is designed to be used with the LD3 raceway and features a snap-on installation. It meets TIA/EIA, used in applications up to 50 V, and is Electric Ivory.

The outside corner fitting is a Surface Raceway fitting designed to transition your raceway around an outside corner while maintaining a 1 inch bend radius. It is designed to be used with the LD3 raceway and features a snap-on installation. It meets TIA/EIA, used in applications up to 50 V, and is Off White.

The outside corner fitting is a Surface Raceway fitting designed to transition your raceway around an outside corner while maintaining a 1 inch bend radius. It is designed to be used with the LD3 raceway and features a snap-on installation. It meets TIA/EIA, used in applications up to 50 V, and is White.

The outside corner fitting is a Surface Raceway fitting designed to transition your raceway around an outside corner while maintaining a 1 inch bend radius. It is designed to be used with the LD5 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is Electric Ivory.

The outside corner fitting is a Surface Raceway fitting designed to transition your raceway around an outside corner while maintaining a 1 inch bend radius. It is designed to be used with the LD5 raceway and features a snap-on installation. It meets TIA/EIA, used in applications up to 50 V, and is International Gray.

The outside corner fitting is a Surface Raceway fitting designed to transition your raceway around an outside corner while maintaining a 1 inch bend radius. It is designed to be used with the LD5 raceway and features a snap-on installation. It meets TIA/EIA, used in applications up to 50 V, and is Off White.

The outside corner fitting is a Surface Raceway fitting designed to transition your raceway around an outside corner while maintaining a 1 inch bend radius. It is designed to be used with the LD5 raceway and features a snap-on installation. It meets TIA/EIA, used in applications up to 50 V, and is White.

The outside corner fitting is a Surface Raceway fitting designed to transition your raceway around an outside corner while maintaining a 1 inch bend radius. It is designed to be used with the LD10 raceway and features a snap-on installation. It meets TIA/EIA, used in applications up to 50 V, and is Electric Ivory.

The outside corner fitting is a Surface Raceway fitting designed to transition your raceway around an outside corner while maintaining a 1 inch bend radius. It is designed to be used with the LD10 raceway and features a snap-on installation. It meets TIA/EIA, used in applications up to 50 V, and is International Gray.

The outside corner fitting is a Surface Raceway fitting designed to transition your raceway around an outside corner while maintaining a 1 inch bend radius. It is designed to be used with the LD10 raceway and features a snap-on installation. It meets TIA/EIA, used in applications up to 50 V, and is Off White.

The outside corner fitting is a Surface Raceway fitting designed to transition your raceway around an outside corner while maintaining a 1 inch bend radius. It is designed to be used with the LD10 raceway and features a snap-on installation. It meets TIA/EIA, used in applications up to 50 V, and is White.

The power rated outside corner fitting is rated for applications up to 600V. It is designed for use with the LDPH10 and is Electric Ivory.

The power rated outside corner fitting is rated for applications up to 600V. It is designed for use with the LDPH10 and is International Gray.

The power rated outside corner fitting is rated for applications up to 600V. It is designed for use with the LDPH10 and is Off White.

The power rated outside corner fitting is rated for applications up to 600V. It is designed for use with the LDPH10 and is White.

The power rated outside corner fitting is rated for applications up to 600V. It is designed for use with the LDPH3 and is Electric Ivory.

The power rated outside corner fitting is rated for applications up to 600V. It is designed for use with the LDPH3 and is Off White.

The power rated outside corner fitting is rated for applications up to 600V. It is designed for use with the LDPH3 and is White.

The power rated outside corner fitting is rated for applications up to 600V. It is designed for use with the LDPH5 and is Electric Ivory.

The power rated outside corner fitting is rated for applications up to 600V. It is designed for use with the LDPH5 and is Off White.

The power rated outside corner fitting is rated for applications up to 600V. It is designed for use with the LDPH5 and is White.

The power rated outside corner fitting is rated for applications up to 600V. It is designed for use with the LDPH10 and is Electric Ivory.

The power rated outside corner fitting is rated for applications up to 600V. It is designed for use with the LDPH10 and is International Gray.

The power rated outside corner fitting is rated for applications up to 600V. It is designed for use with the LDPH10 and is Off White.

The power rated outside corner fitting is rated for applications up to 600V. It is designed for use with the LDPH10 and is White.

Wire Basket Strut Clip is available in a 50 piece package. It is to be used with unistrut. It can be used for all sizes of the Wire Basket. It is avaiable in a zinc finish.

The Wire Basket Trapeze Bracket w/ Center Hole is used in cable routing systems to support a 4 inch wide Wire Basket from either dual or single threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in black powder-coated finish and is sold in packages of two.

The Wire Basket Trapeze Bracket w/ Center Hole is used in cable routing systems to support a 4 inch wide Wire Basket from either dual or single threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in pre-galvanized finish and is sold in packages of two.

The Wire Basket Trapeze Bracket w/ Center Hole is used in cable routing systems to support a 4 inch wide Wire Basket from either dual or single threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in white powder-coated finish and is sold in packages of two.

The Wire Basket Trapeze Bracket w/ Center Hole is used in cable routing systems to support a 6 inch wide Wire Basket from either dual or single threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in black powder-coated finish and is sold in packages of two.

The Wire Basket Trapeze Bracket w/ Center Hole is used in cable routing systems to support a 6 inch wide Wire Basket from either dual or single threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in pre-galvanized finish and is sold in packages of two.

The Wire Basket Trapeze Bracket w/ Center Hole is used in cable routing systems to support a 6 inch wide Wire Basket from either dual or single threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in white powder-coated finish and is sold in packages of two.

The Wire Basket Trapeze Bracket w/ Center Hole is used in cable routing systems to support a 8 inch wide Wire Basket from either dual or single threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in black powder-coated finish and is sold in packages of two.

The Wire Basket Trapeze Bracket w/ Center Hole is used in cable routing systems to support a 8 inch wide Wire Basket from either dual or single threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in pre-galvanized finish and is sold in packages of two.

The Wire Basket Trapeze Bracket w/ Center Hole is used in cable routing systems to support a 8 inch wide Wire Basket from either dual or single threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in white powder-coated finish and is sold in packages of two.

The Wire Basket Trapeze Bracket w/ Center Hole is used in cable routing systems to support a 12 inch wide Wire Basket from either dual or single threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in black powder-coated finish and is sold in packages of two.

The Wire Basket Trapeze Bracket w/ Center Hole is used in cable routing systems to support a 12 inch wide Wire Basket from either dual or single threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in pre-galvanized finish and is sold in packages of two.

The Wire Basket Trapeze Bracket w/ Center Hole is used in cable routing systems to support a 12 inch wide Wire Basket from either dual or single threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in white powder-coated finish and is sold in packages of two.

The Wire Basket Trapeze Bracket w/ Center Hole is used in cable routing systems to support a 18 inch wide Wire Basket from either dual or single threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in black powder-coated finish and is sold in packages of two.

The Wire Basket Trapeze Bracket w/ Center Hole is used in cable routing systems to support a 18 inch wide Wire Basket from either dual or single threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in pre-galvanized finish and is sold in packages of two.

The Wire Basket Trapeze Bracket w/ Center Hole is used in cable routing systems to support a 18 inch wide Wire Basket from either dual or single threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in white powder-coated finish and is sold in packages of two.

The Wire Basket Trapeze Bracket w/ Center Hole is used in cable routing systems to support a 24 inch wide Wire Basket from either dual or single threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in black powder-coated finish and is sold in packages of two.

The Wire Basket Trapeze Bracket w/ Center Hole is used in cable routing systems to support a 24 inch wide Wire Basket from either dual or single threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in pre-galvanized finish and is sold in packages of two.

The Wire Basket Trapeze Bracket w/ Center Hole is used in cable routing systems to support a 24 inch wide Wire Basket from either dual or single threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in white powder-coated finish and is sold in packages of two.

The Wire Bakset Trapeze Bracket is used in cable routing systems to support a 30 inch wide Wire Basket from dual threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in black powder-coated finish and is sold in packages of two.

The Wire Bakset Trapeze Bracket is used in cable routing systems to support a 30 inch wide Wire Basket from dual threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in pre-galvanized finish and is sold in packages of two.

The Wire Bakset Trapeze Bracket is used in cable routing systems to support a 30 inch wide Wire Basket from dual threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in white powder-coated finish and is sold in packages of two.

The Wire Bakset Trapeze Bracket is used in cable routing systems to support a 36 inch wide Wire Basket from dual threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in black powder-coated finish and is sold in packages of two.

The Wire Bakset Trapeze Bracket is used in cable routing systems to support a 36 inch wide Wire Basket from dual threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in pre-galvanized finish and is sold in packages of two.

The Wire Bakset Trapeze Bracket is used in cable routing systems to support a 36 inch wide Wire Basket from dual threaded rod. The hardware for attaching the bracket is sold separately. The Trapeze Bracket comes in white powder-coated finish and is sold in packages of two.

The LD/LDPH Power Rated, 1" BRC is designed to maintain proper bend radius within the channel. It is Electric Ivory.

The LD/LDPH Power Rated, 1" BRC is designed to maintain proper bend radius within the channel. It is Off White.

The LD/LDPH Power Rated, 1" BRC is designed to maintain proper bend radius within the channel. It is White.

The right angle fitting is a one-piece Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1" bend radius. It is made to be used with the LD3 raceway, in applications up to 50 V. It is a snap-on installation and measures 1.82” in length. It is constructed with ABS plastic, meets TIA/EIA, and is Electric Ivory.

The right angle fitting is a one-piece Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1" bend radius. It is made to be used with the LD3 raceway, in applications up to 50 V. It is a snap-on installation and measures 1.82” in length. It is constructed with ABS plastic, meets TIA/EIA, and is Off White.

The right angle fitting is a one-piece Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1" bend radius. It is made to be used with the LD3 raceway, in applications up to 50 V. It is a snap-on installation and measures 1.82” in length. It is constructed with ABS plastic, meets TIA/EIA, and is White.

The right angle fitting is a one-piece Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1" bend radius. It is made to be used with the LD5 raceway, in applications up to 50 V. It is a snap-on installation and measures 2.5” in length. It is constructed with ABS plastic, meets TIA/EIA, and is Electric Ivory.

The right angle fitting is a one-piece Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1" bend radius. It is made to be used with the LD5 raceway, in applications up to 50 V. It is a snap-on installation and measures 2.5” in length. It is constructed with ABS plastic, meets TIA/EIA, and is International Gray.

The right angle fitting is a one-piece Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1" bend radius. It is made to be used with the LD5 raceway, in applications up to 50 V. It is a snap-on installation and measures 2.5” in length. It is constructed with ABS plastic, meets TIA/EIA, and is Off White.

The right angle fitting is a one-piece Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1" bend radius. It is made to be used with the LD5 raceway, in applications up to 50 V. It is a snap-on installation and measures 2.5” in length. It is constructed with ABS plastic, meets TIA/EIA, and is White.

The right angle fitting is a one-piece Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1" bend radius. It is made to be used with the LD10 raceway, in applications up to 50 V. It is a snap-on installation and measures 2.5” in length. It is constructed with ABS plastic, meets TIA/EIA, and is Electric Ivory.

The right angle fitting is a one-piece Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1" bend radius. It is made to be used with the LD10 raceway, in applications up to 50 V. It is a snap-on installation and measures 2.5” in length. It is constructed with ABS plastic, meets TIA/EIA, and is International Gray.

The right angle fitting is a one-piece Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1" bend radius. It is made to be used with the LD10 raceway, in applications up to 50 V. It is a snap-on installation and measures 2.5” in length. It is constructed with ABS plastic, meets TIA/EIA, and is Off White.

The right angle fitting is a one-piece Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1" bend radius. It is made to be used with the LD10 raceway, in applications up to 50 V. It is a snap-on installation and measures 2.5” in length. It is constructed with ABS plastic, meets TIA/EIA, and is White.

The right angle fitting is a Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1 inch bend radius. It is designed to be used with LD3 raceway and features a snap-on installation. It meets TIA/EIA, used in applications up to 50 V, and is Electric Ivory.

The right angle fitting is a Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1 inch bend radius. It is designed to be used with LD3 raceway and features a snap-on installation. It meets TIA/EIA, used in applications up to 50 V, and is Off White.

The right angle fitting is a Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1 inch bend radius. It is designed to be used with LD3/LDPH3 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is Electric Ivory.

The right angle fitting is a Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1 inch bend radius. It is designed to be used with LD5/LDPH5 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is Electric Ivory.

The right angle fitting is a Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1 inch bend radius. It is designed to be used with LD5/LDPH5 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is Off White.

The right angle fitting is a Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1 inch bend radius. It is designed to be used with LD5/LDPH5 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is Electric Ivory.

The Right Angle Fitting is a one-piece raceway fitting designed to transition your raceway around a corner. This raceway fitting is made to be used with the LD10LDPH10 raceway. It is a snap-on installation. It measures 2.5” in length. It is constructed with rigid PVC and is Electric Ivory.

The Right Angle Fitting is a one-piece raceway fitting designed to transition your raceway around a corner. This raceway fitting is made to be used with the LD10/LDPH10 raceway. It is a snap-on installation. It measures 2.5” in length. It is constructed with rigid PVC and is International Gray.

The Right Angle Fitting is a one-piece raceway fitting designed to transition your raceway around a corner. This raceway fitting is made to be used with the LD10/LDPH10 raceway. It is a snap-on installation. It measures 2.5” in length. It is constructed with rigid PVC and is Off White.

The right angle fitting is a Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1 inch bend radius. It is designed to be used with LD10/LDPH10 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is White.

The right angle fitting is a Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1 inch bend radius. It is designed to be used with LDPH3 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is Electric Ivory.

The right angle fitting is a Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1 inch bend radius. It is designed to be used with LD3PH raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is Off White.

The right angle fitting is a Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1 inch bend radius. It is designed to be used with LDPH3 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is White.

The right angle fitting is a Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1 inch bend radius. It is designed to be used with LDPH5 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is Electric Ivory.

The right angle fitting is a Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1 inch bend radius. It is designed to be used with LDPH5 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is Off White.

The right angle fitting is a Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1 inch bend radius. It is designed to be used with LDPH5 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is White.

The right angle fitting is a one-piece raceway fitting designed to transition your raceway around a corner. This raceway fitting is made to be used with the LDPH10 raceway. It is a snap-on installation. It measures 2.5” in length. It is constructed with rigid PVC and is Electric Ivory.

The right angle fitting is a one-piece raceway fitting designed to transition your raceway around a corner. This raceway fitting is made to be used with the LDPH10 raceway. It is a snap-on installation. It measures 2.5” in length. It is constructed with rigid PVC and is International Gray.

The right angle fitting is a one-piece raceway fitting designed to transition your raceway around a corner. This raceway fitting is made to be used with the LDPH10 raceway. It is a snap-on installation. It measures 2.5” in length. It is constructed with rigid PVC and is Off White.

The right angle fitting is a Surface Raceway fitting designed to transition your raceway around a corner while maintaining a 1 inch bend radius. It is designed to be used with LDPH10 raceway and features a snap-on installation. . It meets TIA/EIA Standards, is UL Listed and Compliant. It is White.

The reducer fitting is used with LD3, LDPH3, LD10 and LDPH10 raceway. Used for in-line terminations, use with CFX10 and is Electric Ivory.

The reducer fitting is used with LD3, LDPH3, LD10 and LDPH10 raceway. Used for in-line terminations, use with CFX10 and is Off White.

The reducer fitting is used with LD3, LDPH3, LD10 and LDPH10 raceway. Used for in-line terminations, use with CFX10 and is White.

The single gang two-piece screw together round outlet box accepts UL/CSA devices not to exceed 10lbs. (5lbs. per CSA). For use with Pan-Way® LD profile raceway. Dia. = 5.48"D x 1.14"H (139.2mm x 29.0mm). Breakouts for 3/4" or 1" diameter conduit. It is Electric Ivory.

The single gang two-piece screw together round outlet box accepts UL/CSA devices not to exceed 10lbs. (5lbs. per CSA). For use with Pan-Way® LD profile raceway. Dia. = 5.48"D x 1.14"H (139.2mm x 29.0mm). Breakouts for 3/4" or 1" diameter conduit. It is Off White.

The single gang two-piece screw together round outlet box accepts UL/CSA devices not to exceed 10lbs. (5lbs. per CSA). For use with Pan-Way® LD profile raceway. Dia. = 5.48"D x 1.14"H (139.2mm x 29.0mm). Breakouts for 3/4" or 1" diameter conduit. It is White.

End of row cap kit for integral cabinet top cable routing system. Includes brackets and screws for 1070mm deep cabinet. Color: Black

End of row cap kit for integral cabinet top cable routing system. Includes brackets and screws for 1200mm deep cabinet. Color: Black

End of row cap kit for integral cabinet top cable routing system. Includes brackets and screws for 1200mm deep VED cabinet. Color: Black

The T-45 raceway base with adhesive provides solutions for routing low voltage, fiber optic, and/or power cabling along perimeter walls. The T-45 raceway is supplied with pre-punched mounting holes and is tamper resistant. It is 10 ft and Off White.

The T-45 Cover Coupler is designed to join sections of raceway together. It is Electric Ivory

The T-45 Cover Coupler is designed to join sections of raceway together. It is Off White

The T-45 Cover Coupler is designed to join sections of raceway together. It is White

The T-45 Divider Wall is designed to maintain separation of cables within the raceway. It is 8 ft.

The T-45 Divider Wall is designed to maintain separation of cables within the raceway. It is 10 ft.

The T-45 End Cap is designed to cap off the end of the raceway. It is Electric Ivory

The T-45 End Cap is designed to cap off the end of the raceway. It is Off White

The T-45 End Cap is designed to cap off the end of the raceway. It is White

The T-45 Entrance End is designed to maintain bed radius while routing cables into the T-45 raceway. It is Electric Ivory

The T-45 Entrance End is designed to maintain bed radius while routing cables into the T-45 raceway. It is Off White

The T-45 Entrance End is designed to maintain bed radius while routing cables into the T-45 raceway. It is White

The T-45 Snap-On Hinged Data Bracket is a vertically slopped data outlet with four ports. It is Electric Ivory.

The T-45 Snap-On Hinged Data Bracket is a vertically slopped data outlet with four ports. It is Off White.

The T-45 Snap-On Hinged Data Bracket is a vertically slopped data outlet with four ports. It is White.

The T-45 Electrical Bracket allows for one electrical outlet. Rectangular cut out and is Electric Ivory.

The T-45 Electrical Bracket allows for one electrical outlet. Rectangular cut out and is Off White.

The T-45 Electrical Bracket allows for one electrical outlet. Rectangular cut out and is White

The T-45 Inside Corner fitting allows for the routing of raceway around a corner while maintaining proper bend radius. It is Electric Ivory.

The T-45 Inside Corner fitting allows for the routing of raceway around a corner while maintaining proper bend radius. It is Off White.

The T-45 Inside Corner fitting allows for the routing of raceway around a corner while maintaining proper bend radius. It is White.

The T-45 Outside Corner fitting allows for the routing of raceway around a corner while maintaining proper bend radius. It is Electric Ivory.

The T-45 Outside Corner fitting allows for the routing of raceway around a corner while maintaining proper bend radius. It is Off White.

The T-45 Outside Corner fitting allows for the routing of raceway around a corner while maintaining proper bend radius. It is White.

The T-45 Right Angle is designed to route cables at a right angle. It is Electric Ivory.

The T-45 Right Angle is designed to route cables at a right angle. It is Off White.

The T-45 Right Angle is designed to route cables at a right angle. It is White.

The T-45 Tee Fitting is designed to route cables in a tee orientation. It is Electric Ivory.

The T-45 Tee Fitting is designed to route cables in a tee orientation. It is Off White.

The T-45 Tee Fitting is designed to route cables in a tee orientation. It is White.

The T-45 Offset bracket is designed to accept snap-on or screw-on faceplates. It is Electric Ivory.

The T-45 Offset bracket is designed to accept snap-on or screw-on faceplates. It is Off White.

The T-45 Offset bracket is designed to accept snap-on or screw-on faceplates. It is White.

The T-45 Wire retainer provides Solutions for Routing Low Voltage, Fiber Optic and/or Power Cabling Along Perimeter Walls.

The T-70 Base Coupler is used to join sections of the raceway base. It is Electric Ivory.

The T-70 Base Coupler is used to join sections of the raceway base. It is Off White.

The T-70 Base Coupler is used to join sections of the raceway base. It is White.

The T-70 raceway base provides solutions for routing low voltage, fiber optic, and/or power cabling along perimeter walls. The T-70 raceway is supplied with pre-punched mounting holes and is tamper resistant. It is 6 ft and Off White.

The T-70 raceway base provides solutions for routing low voltage, fiber optic, and/or power cabling along perimeter walls. The T-70 raceway is supplied with pre-punched mounting holes and is tamper resistant. It is 8 ft and Off White.