Panduit cable tray fittings, page 2 of 2

The FiberRunner® Bend Radius Control Trumpet is used to limit the bend radius of the cable to 3 inches (76.2mm) when exiting from the 12x4 channel or a 12x4 horizontal tee.

The FiberRunner® Bend Radius Control Trumpet is used to limit the bend radius of the cable to 3 inches (76.2mm) when exiting from the 12x4 channel or a 12x4 horizontal tee.

The FiberRunner® Bend Radius Control Trumpet is used to limit the bend radius of the cable to 3 inches (76.2mm) when exiting from the 24x4 channel or a 24x4 horizontal tee.

The FiberRunner® Bend Radius Control Trumpet is used to limit the bend radius of the cable to 3 inches (76.2mm) when exiting from the 24x4 channel or a 24x4 horizontal tee.

The FiberRunner® 4x4 Horizontal Tee Split Cover is optional for the for the horizontal tee fitting FRT4X4LBL. The snap-on feature allows the cover to be installed and removed with no tools required. The split cover creates a radiused 0.75 inch (19mm) opening for easy access to add or remove cables.

The FiberRunner® 4x4 Horizontal Tee Split Cover is optional for for the horizontal tee fitting FRT4X4LYL. The snap-on feature allows the cover to be installed and removed with no tools. The split cover creates a radiused 0.75 inch (19mm) opening for easy access to add or remove cables.

The FiberRunner® 6x4 Split Cover is optional for the horizontal tee fitting FRT6X4LYL. The snap-on feature allows the cover to be installed and removed with no tools. The split cover creates a radiused 0.75 inch (19mm) opening for easy access to add or remove cables.

The FiberRunner® 12x4 Split Cover is optional for the horizontal tee fitting FRT12X4LBL. The snap-on feature allows the cover to be installed and removed with no tools required. The split cover creates a radiused 0.75 inch (19mm) opening for easy access to add or remove cables.

The FiberRunner® 12x4 Split Cover is optional for the horizontal tee fitting FRT12X4LYL. The snap-on feature allows the cover to be installed and removed with no tools required. The split cover creates a radiused 0.75 inch (19mm) opening for easy access to add or remove cables.

Optional split cover for the horizontal tee with 4x4 exit fitting FRT12X4W6YL. Snap-on feature allows cover to be installed and removed without tools. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

4x4 Up Spout. Allows cable to be directed upward out of the channel deployed directly below racks and cabinets in underfloor installations. Provides 2in (50.8mm) bend radius. Snaps directly onto the channel and can be positioned to allow cables to be laid in. A 1in (25.4mm) top bezel is included. Other fittings can be installed for specific applications including FTR4X4BL and FIDT4X4BL. Black.

4x4 Up Spout. Allows cable to be directed upward out of the channel deployed directly below racks and cabinets in underfloor installations. Provides 2in (50.8mm) bend radius. Snaps directly onto the channel and can be positioned to allow cables to be laid in. A 1in (25.4mm) top bezel is included. Other fittings can be installed for specific applications including FTR4X4YLL and FIDT4X4BL. Yellow.

6x4 Up Spout. Allows cable to be directed upward out of the channel deployed directly below racks and cabinets in underfloor installations. Provides 2in (50.8mm) bend radius. Snaps directly onto the channel and can be positioned to allow cables to be laid in. A 1 (25.4mm) top bezel is included. Yellow. Black. Other fittings can be installed for specific applications including FTR4X4BL and FIDT4X4BL.

6x4 Up Spout. Allows cable to be directed upward out of the channel deployed directly below racks and cabinets in underfloor installations. Provides 2in (50.8mm) bend radius. Snaps directly onto the channel and can be positioned to allow cables to be laid in. A 1 (25.4mm) top bezel is included. Yellow. Other fittings can be installed for specific applications including FTR4X4YL and FIDT4X4BL.

The FiberRunner® 4x4 Vertical Tee creates a 90° vertical drop from a horizontal run. The vertical tee attaches to a 4x4 channel and/or fittings to create a 90° vertical drop from a horizontal run. The vertical tee fitting accepts a channel cover in conjunction with the channel. It can be used with the QuikLock™ Coupler or Channels, snap rivets or bolts with channels, and the 1-port spillout. This product includes a hinged door.

The FiberRunner® 4x4 Vertical Tee creates a 90° vertical drop from a horizontal run. The vertical tee includes a hinged door.

The FiberRunner® 6x4 Vertical Tee creates a 90° vertical drop from a horizontal run. The vertical tee includes a hinged door.

The FiberRunner® 6x4 Vertical Tee creates a 90° vertical drop from a horizontal run. The vertical tee includes a hinged door.

The FiberRunner® 12x4 Vertical Tee creates a 90° vertical drop from a horizontal run.

The FiberRunner® 12x4 Vertical Tee creates a 90° vertical drop from a horizontal run.

Fitting that transitions from Warren & Brown 8x4 Lightpaths System to 6x4 FiberRunner® System. Fitting has a black finish and is made from metal. Attachment hardware is included.

The FiberRunner® Reducer Fitting attaches any 12x4 FiberRunner® Fitting or Channel to two 6x4 FiberRunner® Channels.

The FiberRunner® Reducer Fitting attaches any 12x4 FiberRunner® Fitting or Channel to two 6x4 FiberRunner® Channels.

The FiberRunner® 12x4 Reducer Cover for the Y-reducer fitting allows the cover to be installed and removed with no tools required. It creates an opening for easy access to add or remove cables.

The FiberRunner® 12x4 Reducer Cover for the Y-reducer fitting allows the cover to be installed and removed with no tools required. It creates an opening for easy access to add or remove cables.

The FiberRunner® 2x2 Horizontal Tee creates a 90° horizontal branch with a 2x2 exit from straight horizontal runs. This directional fitting maintains a 2" bend radius at intersections. It is available in Yellow.

The FiberRunner® 2x2 Horizontal Tee creates a 90° horizontal branch with a 2x2 exit from straight horizontal runs. This directional fitting maintains a 2" bend radius at intersections. It is available in Black.

The FiberRunner® Horizontal Tee Cover attaches to the channel to create a 90° horizontal branch from a straight horizontal run. The cover is included.

The FiberRunner® Bend Radius Control Trumpet is used to limit the bend radius of the cable to 2 inches (50.8mm) when exiting from the 2x2 channel or a 2x2 horizontal tee.

The FiberRunner® Bend Radius Control Trumpet is used to limit the bend radius of the cable to 2 inches (50.8mm) when exiting from the 2x2 channel or a 2x2 horizontal tee.

Used to limit the bend radius of the cable to 2 (50.8mm) when exiting from a 4x4 or 6x4 FiberRunner® Vertical Tee and 4x4 Fiber-Duct Fittings, Black.

The FiberRunner® 3-Sided Vertical Tee Trumpet Spillout Fitting is used in cable routing systems to limit the bend radius of the cable to 2 inches (50.8mm) when exiting from a 4x4 or 6x4 FiberRunner vertical tee.

The FiberRunner® 3-Sided Vertical Tee Trumpet Spillout Fitting is used in cable routing systems to limit the bend radius of the cable to 2 inches (50.8mm) when exiting from a 4x4 or 6x4 FiberRunner® Vertical Tee.

Used for supporting the 2x2 and 4x4 Fiber-Duct™ Systems from existing threaded rod installations. Bracket is secured to threaded rod with two split nuts. Contains hardware for attaching to threaded rods and hardware for mounting channel to bracket. For 1/2" Threaded Rod.

Used for supporting the 2x2 and 4x4 Fiber-Duct™ Systems from existing threaded rod installations. Bracket is secured to threaded rod with two split nuts. Contains hardware for attaching to threaded rods and hardware for mounting channel to bracket. For 5/8" Threaded Rod.

Used for supporting the 2x2 and 4x4 Fiber-Duct™ Systems from new threaded rod installations. Bracket is secured to threaded rod with two nuts. Contains hardware for attaching to threaded rods and hardware for mounting channel to bracket. For 12mm Threaded Rod.

Used for supporting the 2x2 and 4x4 Fiber-Duct™ Systems from new threaded rod installations. Bracket is secured to threaded rod with two nuts. Contains hardware for attaching to threaded rods and hardware for mounting channel to bracket. For 5/8" Threaded Rod.

Used to support the 2x2 and 4x4 Fiber-Duct™ Systems by attaching to underfloor pedestal (not included). Use on pedestals up to 1" in diameter. Bracket contains hardware to attach to pedestal and hardware for mounting channel to bracket.

The FiberRunner® 2x2 Vertical Tee creates a 90° vertical drop from a horizontal run. The vertical tee attaches to a 2x2 channel and/or fittings to create a 90° vertical drop from a horizontal run. The vertical tee fitting accepts a channel cover in conjunction with the channel. It can be used with the QuikLock™ Coupler or Channels, snap rivets or bolts with channels, and the 1-port spillout. This product includes a hinged door.

The FiberRunner® 2x2 Vertical Tee creates a 90° vertical drop from a horizontal run. The vertical tee attaches to a 2x2 channel and/or fittings to create a 90° vertical drop from a horizontal run. The vertical tee fitting accepts a channel cover in conjunction with the channel. It can be used with the QuikLock™ Coupler or Channels, snap rivets or bolts with channels, and the 1-port spillout. This product includes a hinged door.

Bracket used to offset 2x2 or 4x4 Fiber-Duct™ System and hinged duct from the front face of an equipment rack. Bracket provides a secure mounting surface .67" (17mm) from the front of an equipment rack.

The FiberRunner 2x2 channel cover is an optional snap-on for the hinged channel. The cable channel cover features a hinge that can open to 90° from either side of the channel and can be removed completely if desired. It comes in 10 feet in length.

The FiberRunner 2x2 channel cover is an optional snap-on for the hinged channel. The cable channel cover features a hinge that can open to 90° from either side of the channel and can be removed completely if desired. It comes in 10 feet in length.

Snap rivet fastens channel and fittings together for added strength and rigidity. Snap rivet mounts flush to surfaces, White.

Snap rivet fastens channel and fittings together for added strength and rigidity. Snap rivet mounts flush to surfaces, Black.

The Stacking Trapeze Bracket attaches to 12 inch (300mm) wide Wire Basket Pathway to support a second tier of 4x4, 6x4, and 12x4 FiberRunner channel or Wire Basket pathway up to 12". It adjusts 6.5 inches (165mm) to 9.5 inches (241mm) over the top surface of the bottom Wire Basket Pathway. It is offered in black powder-coat.

The Stacking Trapeze Bracket attaches to 18 inch (450mm) wide Wire Basket Pathway to support a second tier of 4x4, 6x4, and 12x4 FiberRunner channel or Wire Basket pathway up to 12". It adjusts 6.5 inches (165mm) to 9.5 inches (241mm) over the top surface of the bottom Wire Basket Pathway. It is offered in black powder-coat.

The Stacking Trapeze Bracket attaches to 24 inch (600mm) wide Wire Basket Pathway to support a second tier of 4x4, 6x4, and 12x4 FiberRunner channel or Wire Basket pathway up to 12". It adjusts 6.5 inches (165mm) to 9.5 inches (241mm) over the top surface of the bottom Wire Basket Pathway. It is offered in black powder-coat.

The Stacking Trapeze Bracket attaches to 30 inch (750mm) wide Wire Basket Pathway to support a second tier of 4x4, 6x4, and 12x4 FiberRunner channel or Wire Basket pathway up to 12". It adjusts 6.5 inches (165mm) to 9.5 inches (241mm) over the top surface of the bottom Wire Basket Pathway. It is offered in black powder-coat.

The Cable Slack Manager can be used on any size basket to neatly spool excess cable slack while ensuring cables maintain 2" bend radius to prevent signal attenuation. It's toolless design easily mounts to the sidewall, inside, or bottom of Wire Basket pathways. It can support up to 72lbs. It comes packaged in quantities of 4 pieces, in black powder-coated finish.

Wire Basket Flat Expansion Splice Bar can be used to create horizontal sweeping bends, end-to-end basket width reductions, and accommodate small gaps between joined pathway sections. It can be used for all Wire Basket sizes ranging from 4" through 36". This kit comes packaged in quantities of 30 pieces, in electro-zinc finish.

Wire Basket Flat Expansion Splice Bar can be used to create horizontal sweeping bends, end-to-end basket width reductions, and accommodate small gaps between joined pathway sections. It can be used for all Wire Basket sizes ranging from 4" through 36". This kit comes packaged in quantities of 30 pieces, in black powder coated finish.

Wire Basket Hardware Kit is a 50 piece set that includes 50 c-clips and 50 c-keps nuts. This hardware kit is used to secure Wire Basket accessories, such as mounting brackets, intersections, and cable exists to wire basket. The kit is available in black zinc finish.

Wire Basket Hardware Kit is a 50 piece set that includes 50 c-clips and 50 c-keps nuts. This hardware kit is used to secure Wire Basket accessories, such as mounting brackets, intersections, and cable exists to wire basket. The kit is available in zinc finish.

The Push-On style kit is a toolless design used to easily connect two pathways togther. This kit packaged in quantities of 50 pieces and comes in black zinc finish.

The Push-On splice kit is a toolless design used to easily connect two pathways togther. This kit is packaged in quantities of 50 pieces and comes in electro zinc finish.

The Top of Cabinet Bracket for Wire Basket allows pathway up to 36" wide to be mounted 2.25" above a continous row of FlexFusion cabinets that are 1070mm deep. It can be used with the Elevation Kit to provide additional space between pathway and cabinets. It comes in powder-coated black finish, with all necessary hardware.

The Top of Cabinet Bracket for Wire Basket allows pathway up to 36" wide to be mounted 2.25" above a continous row of FlexFusion cabinets that are 1200mm deep. It can be used with the Elevation Kit to provide additional space between pathway and cabinets. It comes in powder-coated black finish, with all necessary hardware.

Used in conjunction with Top of Cabinet Bracket, the Elevation Kit raises Wire Basket sections up to 36" wide above FlexFusion cabinets. Height adjustability ranges from 8.3" to 15.3" depending on Wire Basket sidewall height. It comes in black powder-coated finish.

Threaded rod can be used with various mounting brackets. Length: 12" (305mm).

Threaded rod can be used with various mounting brackets. Length = 12" (305mm).

Bend radius control trumpet for exiting at the sidewall of 2 wall heights of type H hinged cover wiring duct channels. Maintains 1 (25.4mm) bend radius control. Black color only.

Used to protect cabling from threaded rod. Vertical slit allows easy installation. For indoor use only. Gray.

Used to protect cabling from threaded rod. Vertical slit allows easy installation. Black.

Uniclip Stainless Steel I-Beam Bracket for use with Unslotted Ladder Rungs.

Uniclip Galvanized Steel I-Beam Bracket for use with Unslotted Ladder Rungs.

The UCRND1-V316 Uniclip Mounting Bracket is an effective option for protecting against high short circuit fault current requirements in harsh environments. This product provides labor savings and enables cable cleats to be mounted on unslotted round-type cable tray rungs. Designed for use with Panduit’s MLT and MS Strapping Cable Cleats. Made from 316 AISI SS.

The UCRND1-VC Uniclip Mounting Bracket is an effective option for protecting against high short circuit fault current requirements in harsh environments. This product provides labor savings and enables cable cleats to be mounted on unslotted round-type cable tray rungs. Designed for use with Panduit’s MLT and MS Strapping Cable Cleats. Made from Galvanized Steel.

The UCSQ1-V316 Uniclip Mounting Bracket is an effective option for protecting against high short circuit fault current requirements in harsh environments. This product provides labor savings and enables cable cleats to be mounted on unslotted strut-type cable tray rungs. Designed for use with Panduit’s MLT and MS Strapping Cable Cleats. Made from 316 AISI SS.

Uniclip Galvanized Steel Strut-Type Bracket for use with Unslotted Ladder Rungs.

The UCSQ1-V316 Uniclip Mounting Bracket is an effective option for protecting against high short circuit fault current requirements in harsh environments. This product provides labor savings and enables cable cleats to be mounted on unslotted top-hat-type cable tray rungs. Designed for use with Panduit’s MLT and MS Strapping Cable Cleats. Made from 316 AISI SS.

The UCSQ1-V316 Uniclip Mounting Bracket is an effective option for protecting against high short circuit fault current requirements in harsh environments. This product provides labor savings and enables cable cleats to be mounted on unslotted top-hat-type cable tray rungs. Designed for use with Panduit’s MLT and MS Strapping Cable Cleats. Made from Galvanized Steel.

The UCUC1-V316 Uniclip bracket is designed for use with metal locking strap and buckle strap cable cleats to allow cable cleat installation on slotted cable tray. The bracket aids to eliminate diagonal installations and high resistance to lateral and axial movement. The bracket is compatible with U-channel type cable ladder rungs in galvanized steel, stainless steel, and aluminum constructions. Features 316 SS material and includes bracket, carriage bolt, and serrated flange nut.

The UCUC1-VC Uniclip bracket is designed for use with metal locking strap and buckle strap cable cleats to allow cable cleat installation on slotted cable tray. The bracket aids to eliminate diagonal installations and high resistance to lateral and axial movement. The bracket is compatible with U-channel type cable ladder rungs in galvanized steel, stainless steel, and aluminum constructions. Features galvanized commercial steel and includes bracket, carriage bolt, and serrated flange nut.

Uniclip U-Channel Type SS Bracket

Uniclip U-Channel Type 316 Stainless Steel Bracket, UCUC3 Style