Panduit cable tray fittings, page 1 of 2

The CBH15L50-V6 Mounting Cleat Bracket is an effective option for protecting against high short circuit fault current requirements in harsh environments. This product eliminates the need for drilling holes through rungs to secure cable cleats and utilizes an easy-to-use swing bolt assembly. Designed for use with Panduit’s CCSSTR Series Stainless Steel Trefoil Cleats and CCALTR Series Aluminum Trefoil Cleats. Features 15mm height, 50mm length, and 316L stainless steel.

The CBH20L50-V6 Mounting Cleat Bracket is an effective option for protecting against high short circuit fault current requirements in harsh environments. This product eliminates the need for drilling holes through rungs to secure cable cleats and utilizes an easy-to-use swing bolt assembly. Designed for use with Panduit’s CCSSTR Series Stainless Steel Trefoil Cleats and CCALTR Series Aluminum Trefoil Cleats. Features 20mm height, 50mm length, and 316L stainless steel.

The CBH25L50-V6 Mounting Cleat Bracket is an effective option for protecting against high short circuit fault current requirements in harsh environments. This product eliminates the need for drilling holes through rungs to secure cable cleats and utilizes an easy-to-use swing bolt assembly. Designed for use with Panduit’s CCSSTR Series Stainless Steel Trefoil Cleats and CCALTR Series Aluminum Trefoil Cleats. Features 25mm height, 50mm length, and 316L stainless steel.

The CBH30L50-V6 Mounting Cleat Bracket is an effective option for protecting against high short circuit fault current requirements in harsh environments. This product eliminates the need for drilling holes through rungs to secure cable cleats and utilizes an easy-to-use swing bolt assembly. Designed for use with Panduit’s CCSSTR Series Stainless Steel Trefoil Cleats and CCALTR Series Aluminum Trefoil Cleats. Features 30mm height, 50mm length, and 316L stainless steel.

Two-piece bracket attaches to 3/8" (9.5mm) wide x 1 1/2" (38.1mm) or 3/8" (9.5mm) wide x 2" (50.8mm) ladder rack rail. Bracket halves slide into position and clamp together on the ladder rack rail, which allows for a one-handed assembly of the threaded rod (not included). Contains bracket and hardware for attaching bracket to ladder rack.

The fiber mounting 2-piece ladder rack bracket attaches to either a 3/8" (9.5mm) wide x 1 1/2" (38.1mm) or a 3/8" (9.5mm) wide x 2" (50.8mm) ladder rack rail. The bracket halves slide into position and clamp together on the ladder rack rail, which allows for one-handed assembly of the 5/8" threaded rod (not included). It contains the bracket and hardware for attaching the bracket to the ladder rack. It is black and made of steel.

1/4" plastic bolts and hex nuts fastens channel and fittings together for added strength and rigidity.

1/4" plastic bolts and wing nuts fastens channel and fittings together for added strength and rigidity.

Fitting that transitions from ADC's 4x4 FiberGuide* Fiber Cable Management System to 4x4 Fiber-Duct™ System. Fitting has a black finish and is made from metal. Attachment hardware is included.

The FiberRunner® QuikLock™ Coupler is a pre-assembled coupler designed to quickly join two sections of channel and/or fittings in a cable routing system. The coupler measures 2 inches x 2 inches. No tools are required for installation.

Pre-assembled coupler quickly joins two sections of hinged channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 5/16" nut driver to allow coupler to be removed if necessary, Black.

The FiberRunner® 2x2 QuikLock™ Coupler quickly joins two sections of channels and/or fittings. The coupler delivers fast installations due to toolless installation.

The FiberRunner® QuikLock™ Coupler is a pre-assembled coupler designed to quickly join two sections of channel and/or fittings in a cable routing system. The coupler measures 2 inches x 2 inches. No tools are required for installation.

Bracket consists of two identical components that clamp onto the crossmembers of standard EIA/TIA racks and are secured with standard hex nuts and split lockwashers (included) tightened onto a length of 5/8" diameter threaded rod (not included). The threaded rod is positioned in the center of the brackets providing a vertical threaded rod stud to mount FiberRunner® and Fiber-Duct™ Threaded Rod Mounting Brackets onto.

The FiberRunner® 2x2 4-Way Cross Fitting attaches to 2x2 channels and/or fittings to create a horizontal 4-way cross intersection with two 2x2 exits.

The FiberRunner® 2x2 4-Way Cross Fitting attaches to 2x2 channels and/or fittings to create a horizontal 4-way cross intersection with two 2x2 exits.

The FiberRunner® 2x2 End Cap is used for closing off open ends of the hinged channel or fitting. The end cap is push-on installation. No coupler is required.

The FiberRunner® 2x2 End Cap is used for closing off open ends of the hinged channel or fitting. The end cap is push-on installation. No coupler is required.

The FiberRunner® 1-Port Spillout is used with a 2x2 fitting. The spillout is used to route cable into three separate 1.5 inch (3.8mm) diameter split corrugated tubing.

The FiberRunner® 1-Port Spillout is used with a 2x2 fitting. The spillout is used to route cable into one separate 1.5 inch (3.8mm) diameter split corrugated tubing.

The fiber routing 2-port spillout is used to route cable into one or two pieces of 1.5 (38mm) inside diameter split corrugated tubing. It is used with FRVT6X4YL, FRVT4X4YL, or FVT4X4YL. It is black and made of ABS plastic.

The FiberRunner® 2-Port Spillout is used to route cable into one or two pieces of 1.5 (38mm) inside diameter split corrugated tubing.

Metal fitting attaches to end of channel or fitting to transition up to four pieces of solid 1.5 (38mm) inside diameter inner duct. Hardware is included for installation. Black color only.

2 x 2 Fiber-Duct Fitting. Attaches to channel to create a 45° upward angle from a straight horizontal run. Used with outside vertical 45° angle fitting FOV452X2BL or FOV454X4BL to change level of straight horizontal runs. Cover included.

The FiberRunner® 2x2 Inside Vertical creates a 45° upward angle from a straight horizontal run. It is used with outside vertical 45° angle fitting FOV452X2LBL to change the level of a straight horizontal run.

The FiberRunner® 2x2 Inside Vertical creates a 45° upward angle from a straight horizontal run. It is used with outside vertical 45° angle fitting FOV452X2LYL to change the level of a straight horizontal run.

2 x 2 Fiber-Duct Fitting. Attaches to channel to create a 45° upward angle from a straight horizontal run. Used with outside vertical 45° angle fitting FOV452X2YL or FOV454X4YL to change level of straight horizontal runs. Cover included.

The FiberRunner® 2x2 Inside Vertical attaches to a channel to create a 90° upward angle from a straight horizontal run. It is used with outside vertical 90° angle fitting FOVRA2X2LYL to change level of a straight horizontal run.

The FiberRunner® 2x2 Inside Vertical attaches to a channel to create a 90° upward angle from a straight horizontal run. It is used with outside vertical 90° angle fitting FOVRA2X2LYL to change level of a straight horizontal run.

Used to support FiberRunner® 2" x 2" channel by attaching to a wall or the front or back of an equipment rack. Contains hardware for mounting the channel to the bracket.

The HD Flex™ Bracket and Cassette Holder is four ports and is 0RU. It is black.

The HD Flex™ Bracket and Cassette Holder is six ports and is 0RU. It is black.

The HD Flex™ Bracket and Cassette Holder is 12 ports and is 0RU. It is black.

The HD Flex™ Cassette Holder is four ports and is 0RU. It is black.

The HD Flex™ Cassette Holder is six ports and is 0RU. It is black.

The HD Flex™ Cassette Holder is 12 ports and is 0RU. It is black.

2 x 2 Fiber-Duct Fitting. Attaches to channel to create a 45° downward angle from a straight horizontal run. Used with inside vertical 45° angle fitting FIV452X2BL or FIV454X4BL to change level of straight horizontal runs. Cover included.

The FiberRunner® 2x2 Outside Vertical attaches to a channel to create a 45° downward angle from a straight horizontal run. It is used with inside vertical 45° angle fitting FIV452X2LBL to change the level of a straight horizontal run.

The FiberRunner® 2x2 Outside Vertical attaches to a channel to create a 45° downward angle from a straight horizontal run. It is used with inside vertical 45° angle fitting FIV452X2LYL to change the level of straight horizontal runs.

2 x 2 Fiber-Duct Fitting. Attaches to channel to create a 45° downward angle from a straight horizontal run. Used with inside vertical 45° angle fitting FIV452X2YL or FIV454X4YL to change level of straight horizontal runs. Cover included.

The FiberRunner® Outside Vertical attaches to a channel to create a 90° downward angle from a straight horizontal run. It is used with inside vertical 90° angle fitting FIVRA2X2LBL to change the level of a straight horizontal run.

The FiberRunner® Outside Vertical attaches to a channel to create a 90° downward angle from a straight horizontal run. It is used with inside vertical 90° angle fitting FIVRA2X2LYL to change the level of a straight horizontal run.

The FiberRunner® 1-Port Spillout is used to route cable into 1.5 inch (38mm) diameter split corrugated tubing directly through a hole cut in the side wall. It is compatible with the 4x4, 6x4, and 12x4 FiberRunner® Channel.

The FiberRunner® 1-Port Spillout is used to route cable into 1.5 inch (38mm) diameter split corrugated tubing directly through a hole cut in the side wall. It is compatible with the 4x4, 6x4, and 12x4 FiberRunner® Channel.

Used to support 12x4, 6x4, and 4x4 systems attaching to the top of the 19" wide version of the Panduit R4P* 4 post rack. Contains all hardware required to assemble bracket to the top of the 4 post rack. Bracket accepts 5/8" threaded rod (not included).

Used to support the 6x4 and 4x4 systems attaching to the top of cabinets. Adjustable from 4 1/4" (108mm) to 9" (229mm) allowing runs to be leveled over uneven cabinet heights. Bracket is secured to the cabinet frame with through bolts (not included). The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

The FiberRunner® QuikLock™ Adjustable C Bracket is used in cable routing systems to support the 6x4 or 4x4 systems by attaching to the top of the cabinets. It features two-position height adjustments to accommodate systems with or without a hinged cover. It is used for 1/2-inch or 12mm threaded rod. It is secured to the cabinet frame with trough bolts (not included). The pre-assembled slide clamps enable fast assembly to the channel.

Used to support the 6x4 and 4x4 systems from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 5/8in threaded rod.

Used to support the 6x4 and 4x4 systems from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 16mmn threaded rod.

Used to support the 6x4 and 4x4 systems from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly to the top of cabinets, For 1/2in threaded rod.

Used to support the 6x4 and 4x4 systems from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly to the top of cabinets, For 5/8in threaded rod.

Used to support the 6x4 and 4x4 systems from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly to the top of cabinets, For 16mm threaded rod.

Used to support the 6x4 and 4x4 systems attaching directly to any 3/8 (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail. No threaded rod required. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

Used to support the 6x4 and 4x4 systems attaching to the top of an equipment rack. Contains hardware to mount to the top of EIA/TIA equipment racks. No threaded rod required. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

Used to support the 6x4 and 4x4 systems by spanning two threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamp enables fast assembly to channel. Use 7/16in nut driver on slide clamps, For 1/2in threaded rod.

Used to support the 6x4 and 4x4 systems by spanning two threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamp enables fast assembly to channel. Use 7/16in nut driver on slide clamps, For 12mm threaded rod.

Used to support the 6x4 and 4x4 systems by spanning two threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamp enables fast assembly to channel. Use 7/16in nut driver on slide clamps, For 3/8in threaded rod.

Used to support the 6x4 and 4x4 systems from existing threaded rod installations. Bracket is secured to threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps, For 12mm Threaded Rod.

Used to support the 6x4 and 4x4 systems from existing threaded rod installations. Bracket is secured to threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps, For 5/8" Threaded Rod.

Used to support the 6x4 and 4x4 systems from existing threaded rod installations. Bracket is secured to threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps, For 16mm Threaded Rod.

Used to support the 6x4 and 4x4 systems from any new threaded rod installations. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps, For 16mm Threaded Rod.

Used to support the 6x4 and 4x4 systems by attaching to underfloor pedestals. (Contains all necessary hardware.) Use on pedestals up to 1" in diameter. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

The FiberRunner® QuikLock™ Adjustable C Bracket is used to support the 12x4 system from any 1/2-inch or 12mm threaded rod which is extended down directly from the ceiling, the grid, or a ladder rack system. It features two-position height adjustments to accommodate systems with or without a hinged cover. The adjustable cabinet bracket is secured to the threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to the channel.

Used to support the 12x4 system from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 5/8in threaded rod.

Used to support the 12x4 system from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 16mm threaded rod.

Self-tapping screws allow selected 24x4 and 12x4 fittings to be fastened directly to mounting brackets for additional support. Screws tap directly into those 24x4 and 12x4 fittings that have plastic bosses.

Used to support the 12x4 system from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly to the top of cabinets, For 1/2in threaded rod.

Used to support the 12x4 system from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly to the top of cabinets, For 12mm threaded rod.

Used to support the 12x4 system from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly to the top of cabinets, For 5/8in threaded rod.

Used to support the 12x4 system by spanning two threaded rod drops that are 18in apart. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 5/8in threaded rod.

Used to support the 12x4 system by spanning two threaded rod drops that are 18in apart. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 16mm threaded rod.

Used to support the 12x4 system by spanning two threaded rod drops that are 24in apart. Ideal for supporting trapeze bracket from 24in wide ladder rack or 24in wide cable tray. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 1/2in threaded rod.

Used to support the 12x4 system by spanning two threaded rod drops that are 24in apart. Ideal for supporting trapeze bracket from 24in wide ladder rack or 24in wide cable tray. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 12mm threaded rod.

The FiberRunner® QuikLock™ Trapeze Bracket is used to support the 12x4 system by spanning two threaded rod drops that are 24 inches apart. Ideal for supporting trapeze bracket from 24-inch wide ladder rack or 24in wide cable tray. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16-inch nut driver on slide clamps, for 1/2-inch or 12mm threaded rod.

Used to support the 12x4 system from existing threaded rod installations. Bracket is secured to threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps, For 16mm Threaded Rod.

Used to support the 12x4 system from new threaded rod installations. Bracket is secured to threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

Used to support the 12x4 system by attaching to underfloor pedestals. (Contains all necessary hardware.) Use on pedestals up to 2" in diameter. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

Used to support the 24x4 system by spanning two 1/2" existing threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

Used to support the 24x4 system by spanning two 1/2" existing threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

Used to support the 24x4 system from new threaded rod installations. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

Used to support the 24x4 system from new threaded rod installations. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

Used to disassemble 2x2 FiberRunner® QuikLock™ Couplers when required.

7/16" nut driver for use with the FiberRunner®, GridRunner™, and Wyr-Grid™ Systems.

The FiberRunner® 2x2 Horizontal Right-Angle Fitting attaches to a channel to create a 90° horizontal turn from a straight horizontal run. The cover is included.

The FiberRunner® 2x2 Horizontal Right-Angle Fitting attaches to a channel to create a 90° horizontal turn from a straight horizontal run. The cover is included.

Fitting that transitions from CommScope's 4x4 FiberGuide System to 4x4 FiberRunner® System. The fitting has a black finish and is made from metal. Attachment hardware is included.

The fitting transitions from CommScope’s 12x4 FiberGuide System to the Panduit 12x4 FiberRunner® System. It is black and made of metal. Attachment hardware is included.

The FiberRunner® QuikLock™ Coupler is a pre-assembled coupler designed to quickly join two sections of channel and/or fittings in a cable routing system. The coupler measures 4 inches x 4 inches. No tools are required for installation.

Pre-assembled 4in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Black, 20 pieces.

Pre-assembled 4in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Black, 1 piece.

The FiberRunner® 4x4 QuikLock™ Coupler quickly joins two sections of channels and/or fittings. The coupler delivers fast installations due to toolless installation.

Pre-assembled 4in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Yellow, 20 pieces.

The FiberRunner® QuikLock™ Coupler is a pre-assembled coupler designed to quickly join two sections of channel and/or fittings in a cable routing system. The coupler measures 4 inches x 4 inches. No tools are required for installation.

The FiberRunner® QuikLock™ Coupler is a pre-assembled coupler designed to quickly join two sections of channel and/or fittings in a cable routing system. The coupler measures 6 inches x 4 inches. No tools are required for installation.

Pre-assembled 6in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Black, 20 pieces.

The FiberRunner® 6x4 QuikLock™ Coupler quickly joins two sections of channel and/or fittings. The coupler delivers fast installations due to toolless installation.

The FiberRunner® 6x4 QuikLock™ Coupler quickly joins two sections of channel and/or fittings. The coupler delivers fast installations due to toolless installation.

Pre-assembled 6in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Yellow, 20 pieces.

The FiberRunner® QuikLock™ Coupler is a pre-assembled coupler designed to quickly join two sections of channel and/or fittings in a cable routing system. The coupler measures 12 inches x 4 inches. No tools are required for installation.

Pre-assembled coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8" nut driver to allow coupler to be removed if necessary, Black, 10 pc.

The FiberRunner® 12x4 QuikLock™ Coupler quickly joins two sections of channel and/or fittings. The coupler delivers fast installations due to toolless installation.

The FiberRunner® 12x4 QuikLock™ Coupler quickly joins two sections of channel and/or fittings. The coupler delivers fast installations due to toolless installation.

The FiberRunner® QuikLock™ Coupler is a pre-assembled coupler designed to quickly join two sections of channel and/or fittings in a cable routing system. The coupler measures 12 inches x 4 inches. No tools are required for installation.

Pre-assembled coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8" nut driver to allow coupler to be removed if necessary, Yellow, 10 pc.

Pre-assembled 24in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Black, 1 piece.

Pre-assembled 24in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Yellow, 1 piece.

Pre-assembled 24in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Yellow, 1 piece.

The FiberRunner® 12x4 Cable Retainer holds cable in the channel when the cover is not used. This includes 10 cable retainers per package.

The FiberRunner® 24x4 Snap-On Cover is optional for channel FR24X4LBL10. The cover is 10 feet.

The FiberRunner® 24x4 Snap-On Cover is optional for channel FR24X4LYL10. The cover is 10 feet.

The FiberRunner® 6x4 Dual Downspout attaches to a 6x4 channel and/or fitting to create two 90° 4x4 downward transitions from a horizontal run. The fitting maintains a 2 inch bend radius control throughout the transition to the vertical downspouts. It includes two snap-on throat covers for the dual downspouts.

The FiberRunner® 6x4 Dual Downspout attaches to a 6x4 channel and/or fitting to create two 90° 4x4 downward transitions from a horizontal run. The fitting maintains a 2 inch bend radius control throughout the transition to the vertical downspouts. It includes two snap-on throat covers for the dual downspouts.

Used to fully enclose the 6x4 dual downspout fitting FRDDS6X4BL. Cover is attached to the fitting base with three hinge clips. The hinge clips allow the hinged cover to rotate to a fully closed position and an open position greater than 90°, Black.

The FiberRunner® is used to fully enclose the 6x4 dual downspout fitting FRDDS6X4LBL. The cover is attached to the fitting base with three hinge clips. The hinge clips allow the hinged cover to rotate to a fully closed position and an open position greater than 90°.

The FiberRunner® is used to fully enclose the 6x4 dual downspout fitting FRDDS6X4LYL. The cover is attached to the fitting base with three hinge clips. The hinge clips allow the hinged cover to rotate to a fully closed position and an open position greater than 90°.

The FiberRunner® 4x4 End Cap Fitting is used for closing off open ends of the channel or fittings. The end caps assist in creating a structure that protects fiber optic and high-performance copper data cabling from physical damage.

The FiberRunner® 4x4 End Cap Fitting is used for closing off open ends of the channel or fittings. The end caps assist in creating a structure that protects fiber optic and high-performance copper data cabling from physical damage.

The FiberRunner® 6x4 End Cap Fitting is used for closing off open ends of the channel or fittings. The end caps assist in creating a structure that protects fiber optic and high-performance copper data cabling from physical damage.

The FiberRunner® 6x4 End Cap Fitting is used for closing off open ends of the channel or fittings. The end caps assist in creating a structure that protects fiber optic and high-performance copper data cabling from physical damage.

The FiberRunner® End Cap Fitting is used in cable management to close off open ends of the channel or fittings. The FiberRunner® End Cap Fitting is a push-on installation and does not require a coupler.

The FiberRunner® 12x4 End Cap Fitting is used for closing off open ends of the channel or fittings. The end caps assist in creating a structure that protects fiber optic and high-performance copper data cabling from physical damage.

The FiberRunner® 12x4 End Cap Fitting is used for closing off open ends of the channel or fittings. The end caps assist in creating a structure that protects fiber optic and high-performance copper data cabling from physical damage.

The FiberRunner® 24x4 End Cap Fitting is used for closing off open ends of the channel or fittings. The end caps assist in creating a structure that protects fiber optic and high-performance copper data cabling from physical damage.

The FiberRunner® 24x4 End Cap Fitting is used for closing off open ends of the channel or fittings. The end caps assist in creating a structure that protects fiber optic and high-performance copper data cabling from physical damage.

Attaches to 4x4 channel and/or fittings to create a horizontal four way cross intersection. Accepts optional split cover FRFWCSC4BL.

The FiberRunner® 4x4 4-Way Cross Fitting attaches to 4x4 channel and/or fittings to create a horizontal 4-way cross intersection with two 4x4 exits.

The FiberRunner® 4x4 4-Way Cross Fitting attaches to 4x4 channel and/or fittings to create a horizontal 4-way cross intersection with two 4x4 exits.

The FiberRunner® 6x4 4-Way Cross Fitting attaches to 6x4 channels and/or fittings to create a horizontal 4-way cross intersection with two 6x4 exits.

The FiberRunner® 6x4 4-Way Cross Fitting attaches to 6x4 channels and/or fittings to create a horizontal 4-way cross intersection with two 6x4 exits.

The FiberRunner® 12x4 4-Way Cross Fitting attaches to 12x4 channels and/or fittings to create a horizontal 4-way cross intersection with two 12x4 exits.

The FiberRunner® 12x4 4-Way Cross Fitting attaches to 12x4 channels and/or fittings to create a horizontal 4-way cross intersection with two 12x4 exits.

The FiberRunner® 12x4 4-Way Cross Fitting attaches to 12x4 channel and/or fittings to create a horizontal 4-way cross intersection with two 4x4 exits.

The FiberRunner® 12x4 4-Way Cross Fitting attaches to 12x4 channel and/or fittings to create a horizontal 4-way cross intersection with two 4x4 exits.

The FiberRunner® 12x4 4-Way Cross Fitting attaches to 12x4 channel and/or fittings to create a horizontal 4-way cross intersection with two 6x4 exits.

The FiberRunner® 12x4 4-Way Cross Fitting attaches to 12x4 channel and/or fittings to create a horizontal 4-way cross intersection with two 6x4 exits.

The FiberRunner® 24x4 4-Way Cross Fitting attaches to 24x4 channel and/or fittings to create a horizontal 4-way cross intersection with two 24x4 exits.

The FiberRunner® 24x4 4-Way Cross Fitting attaches to 24x4 channel and/or fittings to create a horizontal 4-way cross intersection with two 24x4 exits.

The FiberRunner® 24x4 4-Way Cross Fitting attaches to 24x4 channel and/or fittings to create a horizontal 4-way cross intersection with two 12x4 exits.

The FiberRunner® 24x4 4-Way Cross Fitting attaches to 24x4 channel and/or fittings to create a horizontal 4-way cross intersection with two 12x4 exits.

The FiberRunner® 4x4 4-Way Cross Cover is for the 4-way cross fitting. The cover creates openings for easy access to add or remove cables.

The FiberRunner® 4x4 4-Way Cross Cover is for the 4-way cross fitting. The cover creates openings for easy access to add or remove cables.

The FiberRunner® 6x4 4-Way Cross Cover is for the 4-way cross fitting. The cover creates openings for easy access to add or remove cables.

The FiberRunner® 6x4 4-Way Cross Cover is for the 4-way cross fitting. The cover creates openings for easy access to add or remove cables.

The FiberRunner® 12x4 4-Way Cross Cover is for the 4-way cross fitting. The cover creates openings for easy access to add or remove cables.

The FiberRunner® 12x4 4-Way Cross Cover is for the 4-way cross fitting. The cover creates openings for easy access to add or remove cables.

Optional split cover for the four way cross fitting FRFWC12X4W4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

The FiberRunner® 12x4 4-Way Cross Cover with 6-inch exits is for the 4-way cross fitting. The cover creates openings for easy access to add or remove cables.

The FiberRunner® 12x4 4-Way Cross Cover with 6-inch exits is for the 4-way cross fitting. The cover creates openings for easy access to add or remove cables.

The FiberRunner® 24x4 Horizontal Cover creates openings for easy access to add or remove cables.

The FiberRunner® 4x4 Horizontal Cover creates openings for easy access to add or remove cables.

The FiberRunner® 4x4 Horizontal Cover creates openings for easy access to add or remove cables.

Optional split cover for the horizontal 45° angle fitting FRH456X4BL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

The FiberRunner® 6x4 Horizontal Cover creates openings for easy access to add or remove cables.

The FiberRunner® 12x4 Horizontal Cover creates openings for easy access to add or remove cables.

The FiberRunner® 12x4 Horizontal Cover creates openings for easy access to add or remove cables.

The FiberRunner® 4x4 Horizontal Fitting attaches to a 4x4 channel and/or fittings to create a 45° horizontal turn from a straight horizontal run.

The FiberRunner® 4x4 Horizontal Fitting attaches to a 4x4 channel and/or fittings to create a 45° horizontal turn from a straight horizontal run.

Attaches to 6x4 channel and/or fittings to create a 45° horizontal turn from a straight horizontal run. Accepts optional split cover FRH45SC6BL.

The FiberRunner® 6x4 Horizontal Fitting attaches to a 6x4 channel and/or fittings to create a 45° horizontal turn from a straight horizontal run.

The FiberRunner® 12x4 Horizontal Fitting attaches to a 12x4 channel and/or fittings to create a 45° horizontal turn from a straight horizontal run.

The FiberRunner® 12x4 Horizontal Fitting attaches to a 12x4 channel and/or fittings to create a 45° horizontal turn from a straight horizontal run.

The FiberRunner® 24x4 Horizontal Fitting attaches to a 24x4 channel and/or fittings to create a 45° horizontal turn from a straight horizontal run.

The FiberRunner® 24x4 Horizontal Fitting attaches to a 24x4 channel and/or fittings to create a 45° horizontal turn from a straight horizontal run.

Optional snap-on hinged cover for channel FR4X4BL6. Hinge feature enables positioning of cover at angles between 30° to 90°.

The FiberRunner® Snap-On Hinged 4x4 Cover is designed to be used in a cable routing system that uses the FR4x4BL10 channel. This snap-on hinged cover features a hinge that enables the positioning of the cover at angles between 30° and 90°. The channel is avaialble in 10 feet lengths

Optional snap-on hinged cover for channel FR4X4YL2. Hinge feature enables positioning of cover at angles between 30° to 90°.

Optional snap-on hinged cover for channel FR4X4YL6. Hinge feature enables positioning of cover at angles between 30° to 90°.

FiberRunner snap-on hinged cover for channel FR4X4YL10. Hinge feature enables positioning of cover at angles between 30° to 90°. The cover comes in 10 feet lengths

Optional snap-on hinged cover for channel FR6X4BL6. Hinge feature enables positioning of cover at angles between 30° and 90°.

The FiberRunner® Snap-On Hinged 6x4 Cover is designed to be used in a cable routing system that uses the FR6x4YL3 channel. This snap-on hinged cover features a hinge that enables the positioning of the cover at angles between 30° and 90°. The channel is avaialble in 10 feet lengths

The FiberRunner® Snap-On Hinged 6x4 Cover is designed to be used in a cable routing system that uses the FR6x4YL10 channel. This snap-on hinged cover features a hinge that enables the positioning of the cover at angles between 30° and 90°. The channel is avaialble in 10 feet lengths

Optional snap-on hinged cover for channel FR12X4BL6. Can be folded down for height restricted areas.

The FiberRunner® Snap-On Hinged Cover is designed to be used in a cable routing system that uses the 12x4 channel. This snap-on hinged cover features a hinge that enables the positioning of the cover at angles between 30° and 90°. The cover comes in 10 feet lenghts

The FiberRunner® Snap-On Hinged 12x4 Cover is designed to be used in a cable routing system that uses the FR12x4YL10 channel. This snap-on hinged cover features a hinge that enables the positioning of the cover at angles between 30° and 90°. The channel is avaialble in 10 feet lengths

The FiberRunner® Snap-On Hinged 12x4 Cover is designed to be used in a cable routing system that uses the FR12x4YL10 channel. This snap-on hinged cover features a hinge that enables the positioning of the cover at angles between 30° and 90°. The channel is avaialble in 10 feet lengths

Provides secure, accessible route for cables spilling out from vertical tee to rack mounted equipment. Kit includes 6ft length of 4x4 capacity hinged duct, 6ft length of 4x4 hinged duct cover, one end cap for 4x4 hinged duct, three FZBA1.5X4 adjustable Z brackets, an adapter fitting, six WR4-C wire retainers and all required mounting hardware. Attaches directly to 6x4 and 4x4 vertical tee exit or FRLPR64 low profile reducer, Black.

The FiberRunner® 2-Port Spillout is used with a 4x4 fitting. The spillout is used to route cable into three separate 1.5 inch (3.8mm) diameter split corrugated tubing.

The FiberRunner® 2-Port Spillout is used with a 4x4 fitting. The spillout is used to route cable into two separate 1.5 inch (3.8mm) diameter split corrugated tubing.

The FiberRunner® 3-Port Spillout is used with a 6x4 fitting. The spillout is used to route cable into three separate 1.5 inch (3.8mm) diameter split corrugated tubing.

The FiberRunner® 3-Port Spillout is used with a 6x4 fitting. The spillout is used to route cable into three separate 1.5 inch (3.8mm) diameter split corrugated tubing.

The FiberRunner® 4x4 Inside Vertical creates a 45° upward angle from a straight horizontal run. It is used with outside vertical 45° angle fitting FROV454X4LBL to change the level of a straight horizontal run.

The FiberRunner® 4x4 Inside Vertical creates a 45° upward angle from a straight horizontal run. It is used with outside vertical 45° angle fitting FROV454X4LYL to change the level of a straight horizontal run.

The FiberRunner® 6x4 Inside Vertical creates a 45° upward angle from a straight horizontal run. It is used with outside vertical 45° angle fitting FROV456X4LBL to change the level of a straight horizontal run.

The FiberRunner® 6x4 Inside Vertical creates a 45° upward angle from a straight horizontal run. It is used with outside vertical 45° angle fitting FROV456X4LYL to change the level of a straight horizontal run.

The FiberRunner® 12x4 Inside Vertical creates a 45° upward angle from a straight horizontal run. It is used with outside vertical 45° angle fitting FROV4512X4LYL to change the level of a straight horizontal run.

The FiberRunner® 24x4 Inside Vertical creates a 45° upward angle from a straight horizontal run. It is used with outside vertical 45° angle fitting FROV4524X4LBL to change the level of a straight horizontal run.

The FiberRunner® 24x4 Inside Vertical creates a 45° upward angle from a straight horizontal run. It is used with outside vertical 45° angle fitting FROV4524X4LYL to change the level of a straight horizontal run.

The FiberRunner® 4x4 Inside Vertical creates a 90° upward angle from a straight horizontal run. It is used with outside vertical 90° angle fitting FROVRA4X4LBL to change the level of a straight horizontal run.

The FiberRunner® 4x4 Inside Vertical creates a 90° upward angle from a straight horizontal run. It is used with outside vertical 90° angle fitting FROVRA4X4LYL to change the level of a straight horizontal run.

The FiberRunner® 6x4 Inside Vertical creates a 90° upward angle from a straight horizontal run. It is used with outside vertical 90° angle fitting FROVRA6X4LBL to change the level of a straight horizontal run.

The FiberRunner® 6x4 Inside Vertical creates a 90° upward angle from a straight horizontal run. It is used with outside vertical 90° angle fitting FROVRA6X4LYL to change level of a straight horizontal run.

The FiberRunner® Reducer is assembled into the 6x4 or 4x4 vertical tee. It allows for the transition to 2x2 FiberRunner® Channel with minimal space required.

Assembled into the 12x4 vertical tee FRVT12X4YL. Allows for the transition to 4x4 Fiber-Duct™ Channel with minimal space required. No tools required for assembly. Black color only.

The FiberRunner® 4x4 Outside Vertical Cover creates openings for easy access to add or remove cables.

The FiberRunner® 4x4 Outside Vertical Cover creates openings for easy access to add or remove cables.

The FiberRunner® 6x4 Outside Vertical Cover creates openings for easy access to add or remove cables.

The FiberRunner® 6x4 Outside Vertical Cover creates openings for easy access to add or remove cables.

The FiberRunner® 12x4 Outside Vertical Cover creates openings for easy access to add or remove cables.

The FiberRunner™ 12x4 Outside Vertical Cover creates openings for easy access to add or remove cables.

The FiberRunner® 4x4 Outside Vertical attaches to a 4x4 channel and/or fitting to create a 45° downward angle from a horizontal run. It is used with inside vertical 45° angle fitting FRIV454X4LBL to change the level of a straight horizontal run.

The FiberRunner® 4x4 Outside Vertical attaches to a 4x4 channel and/or fitting to create a 45° downward angle from a horizontal run. It is used with inside vertical 45° angle fitting FRIV454X4LYL to change the level of a straight horizontal run.

The FiberRunner® 6x4 Outside Vertical creates a 45° downward angle from a horizontal run. It is used with inside vertical 45° angle fitting FRIV456X4LBL to change the level of a horizontal run.

The FiberRunner® 6x4 Outside Vertical creates a 45° downward angle from a horizontal run. It is used with inside vertical 45° angle fitting FRIV456X4LYL to change the level of a horizontal run.

The FiberRunner® 12x4 Outside Vertical creates a 45° downward angle from a horizontal run. It is used with inside vertical 45° angle fitting FRIV4512X4LBL to change the level of a horizontal run.

The FiberRunner® 12x4 Outside Vertical creates a 45° downward angle from a horizontal run. It is used with inside vertical 45° angle fitting FRIV4512X4LYL to change the level of a horizontal run.

The FiberRunner® 24x4 Outside Vertical creates a 45° downward angle from a horizontal run. It is used with inside vertical 45° angle fitting FRIV4524X4LBL to change the level of a horizontal run.

The FiberRunner® 24x4 Outside Vertical creates a 45° downward angle from a horizontal run. It is used with inside vertical 45° angle fitting FRIV4524X4LYL to change the level of a horizontal run.

The FiberRunner® 4x4 Outside Vertical creates a 90° vertical turn down from a straight horizontal run. It is used with inside vertical 90° angle fitting FRIVRA4X4LBL to change the level of a straight horizontal run.

The FiberRunner® 4x4 Outside Vertical creates a 90° vertical turn down from a straight horizontal run. It is used with inside vertical 90° angle fitting FRIVRA4X4LYL to change the level of a straight horizontal run.

The FiberRunner® 6x4 Outside Vertical Right-Angle creates a 90° vertical turn down from a straight horizontal run.

The FiberRunner® 6x4 Outside Vertical Right-Angle creates a 90° vertical turn down from a straight horizontal run.

The FiberRunner® 12x4 Outside Vertical Right-Angle creates a 90° vertical turn down from a straight horizontal run. It is used with inside vertical 90° angle fitting FRIVRA12X4LBL to change the level of a straight horizontal run.

The FiberRunner® 12x4 Outside Vertical Right-Angle creates a 90° vertical turn down from a straight horizontal run. It is used with inside vertical 90° angle fitting FRIVRA12X4LYL to change the level of a straight horizontal run.

The FiberRunner® 4x4 Outside Vertical Right-Angle Cover creates openings for easy access to add or remove cables.

The FiberRunner® 4x4 Outside Vertical Right-Angle Cover creates openings for easy access to add or remove cables.

The FiberRunner® 6x4 Outside Vertical Right-Angle Cover creates openings for easy access to add or remove cables.

The FiberRunner® 6x4 Outside Vertical Right-Angle Cover creates openings for easy access to add or remove cables.

The FiberRunner® 12x4 Outside Vertical Right-Angle Cover creates openings for easy access to add or remove cables.

The FiberRunner® 12x4 Outside Vertical Right-Angle Cover creates openings for easy access to add or remove cables.

Used wherever additional FiberRunner® Slide Clamps would be helpful. For example, use on 12x4 FiberRunner® QuikLock™ Brackets to accommodate dual runs of 6x4 or 4x4 FiberRunner® Channel.

The FiberRunner® 4x4 Horizontal Right-Angle creates a 90° horizontal turn from a straight horizontal run. The inside divider walls manage cables routed around horizontal right angles.

The FiberRunner® 4x4 Horizontal Right-Angle creates a 90° horizontal turn from a straight horizontal run.

Attaches to 6x4 channel base and/or fittings to create a 90° horizontal turn from a straight horizontal run. Accepts optional split cover FRRAASC6BL.

The FiberRunner® 6x4 Horizontal Right-Angle creates a 90° horizontal turn from a straight horizontal run.

The FiberRunner® 6x4 Horizontal Right-Angle creates a 90° horizontal turn from a straight horizontal run.

The FiberRunner® 12x4 Horizontal Right-Angle creates a 90° horizontal turn from a straight horizontal run. The inside divider walls manage cables routed around horizontal right angles.

The FiberRunner® 12x4 Horizontal Right-Angle creates a 90° horizontal turn from a straight horizontal run.

The FiberRunner® Horizontal Right-Angle Fitting attaches to the 12x4 channel and/or fitting to create a 90° horizontal turn from a straight horizontal run. The horizontal right-angle fitting has inside divider walls to manage cables routed around horizontal right angles.

The FiberRunner® 4x4 Horizontal Right-Angle Cover creates openings for easy access to add or remove cables.

The FiberRunner® 4x4 Horizontal Right-Angle Cover creates openings for easy access to add or remove cables.

The FiberRunner® 6x4 Split Cover is optional for the horizontal right-angle fitting FRRA6X4LYL. The snap-on feature allows the cover to be installed and removed with no tools required. The split cover creates a radiused 0.75 inch (19mm) opening for easy access to add or remove cables.

The FiberRunner® 12x4 Split Cover is optional for the horizontal right-angle fitting FRRA12X4LYL. The snap-on feature allows the cover to be installed and removed with no tools required. The split cover creates a radiused 0.75 inch (19mm) opening for easy access to add or remove cables.

The FiberRunner® Fitting and Cover attaches a 4x4 FiberRunner fitting or channel to a 2x2 FiberRunner fitting or channel.

The FiberRunner® Fitting and Cover attaches a 4x4 FiberRunner fitting or channel to a 2x2 FiberRunner fitting or channel.

Attaches any 4x4 FiberRunner® Fitting or Channel to the 4x4 Fiber-Duct™ Channel, S4X4YL6 or E4X4YL6. Includes solid cover.

The FiberRunner® Fitting attaches to a 6x4 FiberRunner fitting or channel to a 4x4 FiberRunner fitting or channel.

The FiberRunner® Fitting attaches to a 6x4 FiberRunner fitting or channel to a 4x4 FiberRunner fitting or channel.

The FiberRunner® Split Cover is for the 6x4 to 4x4 reducer fitting. The split cover has a snap-on feature that allows the cover to be installed and removed with no tools required. It creates a radiused 0.75 inch (19mm) opening for easy access to add or remove cables.

The FiberRunner® Split Cover is for the 6x4 to 4x4 reducer fitting. The split cover has a snap-on feature that allows the cover to be installed and removed with no tools required. It creates a radiused 0.75 inch (19mm) opening for easy access to add or remove cables.

Attaches any 6x4 FiberRunner® Fitting or Channel to the 4x4 Fiber-Duct™ Channel S4X4BL6 or E4X4BL6. Includes solid cover.

The fitting attaches any 6" x 4" (150mm x 100mm) FiberRunner® fitting or channel to the 4" x 4" (100mm x 100mm) Fiber-Duct™ Channel S4X4YL6 or E4X4YL6. It is yellow and made of ABS plastic. It includes a solid cover.

The fitting attaches any 12x4 FiberRunner® Fitting or Channel to any 6x4 FiberRunner® Fitting or Channel. It accepts split cover FRRF126LSCBL

The fitting attaches any 12x4 FiberRunner® Fitting or Channel to any 6x4 FiberRunner® Fitting or Channel. It accepts split cover FRRF126LSCYL

The FiberRunner® Fitting attaches to a 12x4 FiberRunner fitting or channel to a 6x4 FiberRunner fitting or channel.

The optional split cover for the reducer fitting FRRF126LBL. The snap-on feature allows the cover to be installed and removed with no tools required. It creates a radiused 3/4" (19mm) opening for easy access to add or remove cables

The optional split cover for the reducer fitting FRRF126LYL. The snap-on feature allows the cover to be installed and removed with no tools required. It creates a radiused 3/4" (19mm) opening for easy access to add or remove cables

The FiberRunner® Fitting attaches a 12x4 FiberRunner fitting or channel to a 6x4 FiberRunner fitting or channel.

The FiberRunner® Fitting for the left reducer attaches a 12x4 FiberRunner fitting or channel to a 6x4 FiberRunner fitting or channel.

The FiberRunner® Fitting for the right reducer attaches a 12x4 FiberRunner fitting or channel to a 6x4 FiberRunner fitting or channel.

The FiberRunner® Fitting for the right reducer attaches a 12x4 FiberRunner fitting or channel to a 6x4 FiberRunner fitting or channel.

The FiberRunner® Split Cover for the right reducer fitting has a snap-on feature that allows the cover to be installed and removed with no tools required. It creates a radiused 0.5 inch (12.7mm) opening for easy access to add or remove cables.

The FiberRunner® Split Cover for the right reducer fitting has a snap-on feature that allows the cover to be installed and removed with no tools required. It creates a radiused 0.5 inch (12.7mm) opening for easy access to add or remove cables.

The FiberRunner® Split Cover for the reducer fitting has a snap-on feature allows the cover to be installed and removed with no tools required. It creates a radiused 0.75 inch (19mm) opening for easy access to add or remove cables.

The FiberRunner® Split Cover for the reducer fitting has a snap-on feature allows the cover to be installed and removed with no tools required. It creates a radiused 0.75 inch (19mm) opening for easy access to add or remove cables.

The FiberRunner® Fitting attaches to a 24x4 FiberRunner fitting or channel to a 12x4 FiberRunner fitting or channel.

The FiberRunner® Fitting attaches to a 24x4 FiberRunner fitting or channel to a 12x4 FiberRunner fitting or channel.

Optional split hinged cover for the channel FR4X4BL6. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables. Snap-on hinge feature enables positioning of cover at angles between 30° and 90°.

FiberRunner split hinged cover for the channel FR4X4BL10. Snap-on hinge feature enables positioning of cover at angles between 30° and 90°. The cover comes in 10 ft lengths

Optional split hinged cover for the channel FR4X4YL2. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables. Snap-on hinge feature enables positioning of cover at angles between 30° and 90°.

Optional split hinged cover for the channel FR6X4BL2. Creates radiused 3/4 (19mm) opening for easy access to addor remove cables. Snap-on hinge feature enables positioning of cover at angles between 30° and 90°.

Optional split hinged cover for the channel FR6X4BL6. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables. Snap-on hinge feature enables positioning of cover at angles between 30° and 90°.

FiberRunner split hinged cover for the channel FR6X4BL10. Snap-on hinge feature enables positioning of cover at angles between 30° and 90°. The covers come in 10 feet lengths

Optional split hinged cover for the channel FR6X4YL6. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables. Snap-on hinge feature enables positioning of cover at angles between 30° and 90°.

FiberRunner split hinged cover for the channel FR6X4YL10. Snap-on hinge feature enables positioning of cover at angles between 30° and 90°. The covers come in 10 meter length

The FiberRunner® 2x2 Spill-Over Junction Fitting is used in cable routing systems. It assembles onto 4x4, 6x4, 12x4, or 24x4 FiberRunner Channels. It mounts directly to the existing installation with no alteration required.

The FiberRunner® 2x2 Spill-Over Junction Fitting is used in cable routing systems. It assembles onto 4x4, 6x4, 12x4, or 24x4 FiberRunner® Channels. It mounts directly to the existing installation with no alteration required.

The FiberRunner® 4x4 Spill-Over Junction Fitting is used in cable routing systems. It assembles onto 4x4, 6x4, 12x4, or 24x4 FiberRunner® Channels. It mounts directly to the existing installation with no alteration required.

The FiberRunner® 4x4 Spill-Over Junction is used to fully enclose 4x4, 6x4, 12x4, or 24x4 channels. It mounts directly to the existing installation with no alteration required.

The FiberRunner® Spill-Over Junction Cover is used to fully enclose 4x4 channel in conjunction with the FiberRunner® Spill-Over Junction FRSPJ2X2LBL. The cover snaps onto the channel base. The hinged feature provides easy access to add or remove cables.

The FiberRunner® Spill-Over Junction Cover is used to fully enclose 4x4 channel in conjunction with the FiberRunner® Spill-Over Junction FRSPJ2X2LYL. The cover snaps onto the channel base. The hinged feature provides easy access to add or remove cables.

The FiberRunner® Spill-Over Junction Cover is used to fully enclose 6x4 channel in conjunction with the FiberRunner® Spill-Over Junction FRSPJ2X2LBL. The cover snaps onto the channel base. The hinged feature provides easy access to add or remove cables.

The FiberRunner® Spill-Over Junction Cover is used to fully enclose a 6x4 channel in conjunction with the 2x2 spill-over junction. The spill-over junction cover snaps onto the channel base. It has a hinged feature that allows easy access to add or remove cables.

The FiberRunner® Spill-Over Junction Cover is used to fully enclose 4x4 channel in conjunction with the FiberRunner® Spill-Over Junction FRSPJ4X4LBL. The cover snaps onto the channel base. The hinged feature provides easy access to add or remove cables.

The FiberRunner® Cover is used to fully enclose 4x4 channel in conjunction with the FiberRunner® Spill-Over Junction FRSPJ4X4LYL. The cover snaps onto the channel base. The hinged feature provides easy access to add or remove cables.

The FiberRunner® Cover is used to fully enclose 6x4 channel in conjunction with the FiberRunner® Spill-Over Junction FRSPJ4X4LBL. The cover snaps onto the channel base. The hinged feature provides easy access to add or remove cables.

The FiberRunner® Cover is used to fully enclose 6x4 channel in conjunction with the FiberRunner® Spill-Over Junction FRSPJ4X4LYL. The cover snaps onto the channel base. The hinged feature provides easy access to add or remove cables.

The FiberRunner® Spill-Over Junction Cover is used to fully enclose a 12x4 channel when used with the spill-over junction FRSPJ4X4LBL.

The FiberRunner® Spill-Over Junction is used to fully enclose a 12x4 channel when used with the spill-over junction FRSPJ4X4LYL.

The FiberRunner® 4x4 Horizontal Tee creates a 90° horizontal branch with a 4x4 exit from straight horizontal runs. This directional fitting maintains a 2" bend radius at intersections. It is available in Black.

The FiberRunner® 4x4 Horizontal Tee creates a 90° horizontal branch with a 4x4 exit from straight horizontal runs. This directional fitting maintains a 2" bend radius at intersections. It is available in Yellow.

The FiberRunner® 6x4 Horizontal Tee attaches to the 6x4 channel and/or fittings to create a 90° horizontal branch from a straight horizontal run.

The FiberRunner® 6x4 Horizontal Tee creates a 90° horizontal branch with a 6x4 exit from straight horizontal runs. This directional fitting maintains a 2" bend radius at intersections. It is available in Yellow.

The FiberRunner® 6x4 Horizontal Tee creates a 90° horizontal branch with a 6x4 exit from straight horizontal runs. This directional fitting maintains a 2" bend radius at intersections. It is available in Black.

The FiberRunner® 6x4 Horizontal Tee attaches to the 6x4 channel and/or fittings to create a 90° horizontal branch from a straight horizontal run.

The FiberRunner® 12x4 Horizontal Tee attaches to the 12x4 channel and/or fittings to create a 90° horizontal branch with a 12x4 exit from a straight horizontal run.

The FiberRunner® 12x4 Horizontal Tee creates a 90° horizontal branch with a 12x4 exit from straight horizontal runs. This directional fitting maintains a 2" bend radius at intersections. It is available in Black.

The FiberRunner® 12x4 Horizontal Tee creates a 90° horizontal branch with a 12x4 exit from straight horizontal runs. This directional fitting maintains a 2" bend radius at intersections. It is available in Yellow.

The FiberRunner® 12x4 Horizontal Tee creates a 90° horizontal branch with a 4x4 exit from a straight horizontal run. The horizontal tee provides versatility due to multiple spillout options that include spill-over fittings and the vertical tee which accepts a three-sided trumpet, transition to corrugated tubing and the FiberRunner® System.

The FiberRunner® 12x4 Horizontal Tee creates a 90° horizontal branch with a 4x4 exit from a straight horizontal run. The horizontal tee provides versatility due to multiple spillout options that include spill-over fittings and the vertical tee which accepts a three-sided trumpet, transition to corrugated tubing and the FiberRunner® System.

The FiberRunner® 12x4 Horizontal Tee creates a 90° horizontal branch with a 6x4 exit from straight horizontal run.

The FiberRunner® 12x4 Horizontal Tee creates a 90° horizontal branch with a 6x4 exit from straight horizontal run.

The FiberRunner® 24x4 Horizontal Tee creates a 90° horizontal branch with a 12x4 exit from a straight horizontal run. The horizontal tee provides versatility due to multiple spillout options that include spill-over fittings and the vertical tee which accepts a three-sided trumpet, transition to corrugated tubing and the FiberRunner® System.

The FiberRunner® 24x4 Horizontal Tee creates a 90° horizontal branch with a 12x4 exit from straight horizontal run.

The FiberRunner® 24x4 Horizontal Tee Cover creates openings for easy access to add or remove cables.

The FiberRunner® 24x4 Horizontal Tee Cover creates openings for easy access to add or remove cables.

Fitting that transitions from Telect's 4x4 WaveTrax System to 4x4 FiberRunner® System. Fitting has a black finish and is made from metal. Attachment hardware is included.

The FiberRunner® Bend Radius Control Trumpet is used to limit the bend radius of the cable to 2 inches (50.4 mm) when exiting from the 4x4 channel or a 4x4 horizontal tee.

The FiberRunner® Bend Radius Control Trumpet is used to limit the bend radius of the cable to 2 inches (50.4 mm) when exiting from the 4x4 channel or a 4x4 horizontal tee.

The FiberRunner® Bend Radius Control Trumpet is used to limit the bend radius of the cable to 3 inches (76.2mm) when exiting from the 6x4 channel or a 6x4 horizontal tee.

The FiberRunner® Bend Radius Control Trumpet is used to limit the bend radius of the cable to 3 inches (76.2mm) when exiting from the 6x4 channel or a 6x4 horizontal tee.