Panduit patch panel

Replacement label and label cover kit, each kit includes eighteen preprinted labels and eighteen clear label covers per bag. Printed side identify ports 1 thru 72, reverse side has a write-on area. Compatible with 72 port patch panels (CPPL72WBLY, CPPLA72WBLY).

The IndustrialNet™ Copper DIN Rail Patch Panel is constructed of high impact polycarbonate material. This 8-port DIN rail patch panel mounts to a standard 35mm DIN rail and includes adjustable latches to lock in place. The Copper DIN Patch Panel can be used with any Mini-Com® Module that occupies a single space. This DIN rail patch panel includes screws to attach faceplate and Ultimate ID® Labels to identify each port, as well as clear label covers.

The IndustrialNet™ Copper Shielded DIN Rail Patch Panel is constructed of high impact polycarbonate material. This 8-port DIN rail patch panel mounts to a standard 35mm DIN rail and includes adjustable latches to lock in place. The Copper DIN Patch Panel can be used with any Mini-Com® Module that occupies a single space. This DIN rail patch panel includes screws to attach faceplate and Ultimate ID® Labels to identify each port, as well as clear label covers.

The Mini-Com® All Metal Shielded Patch Panel accepts up to 24 Mini-Com Shielded Jack Modules in 1 RU. The panel has a flat design made of stainless steel construction and mounts to 19 inch and 23 inch racks and cabinets. It includes grounding lugs. The panel has white write-on areas, can be identified with adhesive labels, and is black.

The Mini-Com® All Metal Shielded Patch Panel accepts up to 24 Mini-Com Shielded Jack Modules in 1 RU. The panel has a flat design made of stainless steel construction and mounts to 19 inch and 23 inch racks and cabinets. It includes grounding lugs. The patch panel can be identified with adhesive labels, and is white

The Mini-Com® All Metal Shielded Patch Panel Kit includes 24 Cat 6 TG Shielded Jack Modules in 1 RU. The panel has a flat design made of stainless steel construction and mounts to 19 inch and 23 inch racks and cabinets. It includes grounding lugs and a strain relief bar with a premounted quick release bracket. The panel has white write-on areas, can be identified with adhesive labels, and is black.

The Mini-Com® All Metal Shielded Patch Panel accepts up to 24 Mini-Com Shielded Jack Modules in 1 RU. The panel has a flat design made of stainless steel construction and mounts to 19 inch and 23 inch racks and cabinets. It includes a built-in strain relief bar and grounding lugs. The panel has white write-on areas, can be identified with adhesive labels, and is black.

The Mini-Com® All Metal Shielded Patch Panel accepts up to 48 Mini-Com Shielded Jack Modules in 2 RU. The panel has a flat design made of stainless steel construction and mounts to 19 inch and 23 inch racks and cabinets. It includes grounding lugs. The panel has white write-on areas, can be identified with adhesive labels, and is black.

The 48-port patch panel in black has forty eight pre-installed 75 ohm BNC couplers. (1 RU).

The Mini-Com® High Density Shielded Modular Patch Panel accepts up to 48 Mini-Com Shielded Jack Modules in 1 RU. The panel has a flat design and mounts to 19 inch and 23 inch racks and cabinets. It includes a stainless steel stamping with molded faceplates that have a metal bonding strip. The panel is black.

The Mini-Com® High Density Shielded Modular Patch Panel accepts up to 48 Mini-Com Shielded Jack Modules in 1 RU. The panel has a flat design and mounts to 19 inch and 23 inch racks and cabinets. It includes a stainless steel stamping with molded faceplates that have a metal bonding strip. The panel is white

The Mini-Com® All Metal Shielded Patch Panel accepts up to 48 Mini-Com Shielded Jack Modules in 2 RU. The panel has a flat design made of stainless steel construction and mounts to 19 inch and 23 inch racks and cabinets. It includes grounding lugs. The patch panel can be identified with adhesive labels, and is white

The Mini-Com® All Metal Shielded Patch Panel accepts up to 48 Mini-Com Shielded Jack Modules in 2RU. The panel has a flat design made of stainless steel construction and mounts to 19 inch and 23 inch racks and cabinets. It includes a built-in strain relief bar and grounding lugs. The panel has white write-on areas, can be identified with adhesive labels, and is black.

Coupler patch panel, 24 ports, flat, 1 RU, black

Coupler patch panel, 24 ports, flat, 1 RU, black

Coupler patch panel, 24 ports, flat, 1 RU, black

The Mini-Com® All Metal Shielded Patch Panel accepts up to 24 Mini-Com Shielded Jack Modules in 1 RU. The panel has an angled design made of stainless steel construction and mounts to 19 inch and 23 inch racks and cabinets. It includes grounding lugs. The panel has white write-on areas, can be identified with adhesive labels, and is black.

The Mini-Com® All Metal Shielded Patch Panel accepts up to 24 Mini-Com Shielded Jack Modules in 1 RU. The panel has an angled design made of stainless steel construction and mounts to 19 inch and 23 inch racks and cabinets. It includes grounding lugs. The patch panel can be identified with adhesive labels, and is white.

The Mini-Com® All Metal Shielded Patch Panel accepts up to 48 Mini-Com Shielded Jack Modules in 2 RU. The panel has an angled design made of stainless steel construction and mounts to 19 inch and 23 inch racks and cabinets. It includes grounding lugs. The panel has white write-on areas, can be identified with adhesive labels, and is black.

The Mini-Com® High Density Shielded Modular Patch Panel accepts up to 48 Mini-Com Shielded Jack Modules in 1 RU. The panel has an angled design and mounts to 19 inch and 23 inch racks and cabinets. It includes a stainless steel stamping with molded faceplates that have a metal bonding strip. The panel is black.

The Mini-Com® High Density Shielded Modular Patch Panel accepts up to 48 Mini-Com Shielded Jack Modules in 1 RU. The panel has an angled design and mounts to 19 inch and 23 inch racks and cabinets. It includes a stainless steel stamping with molded faceplates that have a metal bonding strip. The panel is white.

The Mini-Com® All Metal Shielded Patch Panel accepts up to 48 Mini-Com Shielded Jack Modules in 2 RU. The panel has an angled design made of stainless steel construction and mounts to 19 inch and 23 inch racks and cabinets. It includes grounding lugs. The patch panel can be identified with adhesive labels, and is white

Rack filler panel, angled, 1 RU horizontal, reserves rack space for future use and is black

Rack filler panel, angled, 2 RU horizontal, reserves rack space for future use and is black

Transitional cover for angled patch panels and is black

The Mini-Com® Faceplate Modular Patch Panel accepts up to 12 Mini-Com Modules for unshielded applications, and mounts to 89D bracket (sold separately). The patch panel offers front access and can be identified with adhesive labels and is black.

The Mini-Com® Flush Mount Modular Patch Panel accepts up to 24 Mini-Com Modules for unshielded applications in 1 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel mounts flush with the rack and can be identified with adhesive labels, the ports are grouped in 6 and is black.

The Mini-Com® Flush Mount Modular Patch Panel accepts up to 24 Mini-Com Modules for unshielded applications in 1 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel mounts flush with the rack and can be identified with adhesive labels and is black.

The Mini-Com® Faceplate Modular Patch Panel accepts up to 24 Mini-Com Modules for unshielded applications in 1 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access and can be identified with adhesive labels and is black.

The Mini-Com® Faceplate Modular Patch Panel accepts up to 32 Mini-Com Modules for unshielded applications in 1 RU, and mounts to 19 inch and 23 inch racks and cabinets. The patch panel offers front access and can be identified with adhesive labels, ports are grouped in 8 and is black.

The Mini-Com® Flush Mount Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 2 RU, and mounts to 19 inch and 23 inch racks and cabinets. The patch panel mounts flush with the rack and can be identified with adhesive labels, the ports are grouped in 6 and is black.

The Mini-Com® Flush Mount Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 2 RU and mounts to 19 inch and 23 inch racks and cabinets. The patch panel includes pre-printed numbers that follow a vertical sequence, can be identified with adhesive labels and is black.

The Mini-Com® Flush Mount Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 2 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel mounts flush with the rack and can be identified with adhesive labels and is black.

The Mini-Com® High Density Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel can be identified with adhesive labels and is black.

The Mini-Com® High Density Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The patch panel can be identified with adhesive labels and is white.

The Mini-Com® High Density Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel includes pre-printed numbers that follow a vertical sequence and is black.

The Mini-Com® High Density Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel is black.

The Mini-Com® Faceplate Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 2 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access and can be identified with adhesive labels and is black.

The Mini-Com® Flush Mount Modular Patch Panel accepts up to 72 Mini-Com Modules for unshielded applications in 2 RU, and mounts to 19 inch and 23 inch racks and cabinets. The patch panel mounts flush with the rack and can be identified with adhesive labels and is black.

The Mini-Com® Flush Mount Angled Modular Patch Panel accepts up to 24 Mini-Com Modules for unshielded applications in 1 RU, and mounts to 19 inch and 23 inch racks and cabinets. The patch panel mounts flush with the rack; can be identified with adhesive labels, the ports are grouped in 6 and is black.

The Mini-Com® Flush Mount Angled Modular Patch Panel accepts up to 24 Mini-Com Modules for unshielded applications in 1 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel mounts flush with the rack and can be identified with adhesive labels and is black.

The Mini-Com® Flush Mount Angled Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 2 RU, and mounts to 19 inch and 23 inch racks and cabinets. The patch panel mounts flush with the rack; can be identified with adhesive labels, the ports are grouped in 6 and is black.

The Mini-Com® Flush Mount Angled Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 2 RU, and mounts to 19 inch and 23 inch racks and cabinets. The patch panel mounts flush with the rack; includes pre-printed numbers that follow a vertical sequence, can be identified with adhesive labels, the ports are grouped in 6 and is black.

The Mini-Com® Flush Mount Angled Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 2 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel mounts flush with the rack and can be identified with adhesive labels and is black.

The Mini-Com® High Density Angled Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel can be identified with adhesive labels and is black.

The Mini-Com® High Density Angled Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The patch panel can be identified with adhesive labels and is white.

The Mini-Com® High Density Angled Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The patch panel mounts flush with the rack, includes pre-printed numbers that follow a vertical sequence and is black.

The Mini-Com® High Density Angled Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel is black.

The Mini-Com® Flush Mount Angled Modular Patch Panel accepts up to 72 Mini-Com Modules for unshielded applications in 2 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel mounts flush with the rack, can be identified with adhesive labels, and is black.

The Mini-Com® Modular Patch Panel Kit includes 24 Mini-Com Cat 6 TG Jack Modules for unshielded applications, is 1 RU, and mounts to 19 inch and 23 inch racks and cabinets. The patch panel offers front access, can be identified with adhesive labels, and is black.

The Mini-Com® Faceplate Modular Patch Panel Kit includes 24 Mini-Com Cat 5e Leadframe Jack Modules, is 1 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, can be identified with adhesive labels, and is black.

The Mini-Com® Faceplate Modular Patch Panel Kit includes 48 Mini-Com Cat 5e Leadframe Jack Modules, is 2 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, can be identified with adhesive labels, and is black.

The Mini-Com® Modular Patch Panel Kit includes 24 Mini-Com Cat 6A TG Jack Modules for unshielded applications, is 1 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, includes label pockets for easy identification, and is black.

The Mini-Com® Modular Patch Panel Kit includes 48 Mini-Com Cat 6A TG Jack Modules for unshielded applications, is 2 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, includes label pockets for easy identification, and is black.

The Mini-Com® Modular Patch Panel Kit includes 24 Mini-Com Cat 6 TG Jack Modules for unshielded applications, is 1 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, includes label pockets for easy identification, and is black.

The Mini-Com® Modular Patch Panel Kit includes 48 Mini-Com Cat 6 TG Jack Modules for unshielded applications, is 2 RU, and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, includes label pockets for easy identification, and is black.

The Mini-Com® Angled Modular Patch Panel Kit includes 48 Mini-Com Cat 6A TG Jack Modules for unshielded applications, is 2 RU, and mounts to 19 inch and 23 inch racks and cabinets. The patch panel offers front access, includes label pockets for easy identification, and is black.

The Mini-Com® Faceplate Modular Patch Panel accepts up to 24 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. Ports are grouped in 6. The panel includes label pockets with preprinted labels for easy identification and is black.

The Mini-Com® Faceplate Modular Patch Panel accepts up to 24 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, includes label pockets for easy identification, and is black.

The Mini-Com® Faceplate Recessed Modular Patch Panel accepts up to 24 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch racks and cabinets. The patch panel offers front access, includes label pockets for easy identification, and is black.

The Mini-Com® Faceplate Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 2 RU and mounts to 19 inch and 23 inch racks and cabinets. Ports are grouped in 6. The patch panel includes label pockets with preprinted labels for easy identification and is black.

The Mini-Com® Faceplate Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 2 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, includes label pockets for easy identification, and is black.

The Mini-Com® Faceplate Modular Patch Panel accepts up to 72 Mini-Com Modules for unshielded applications in 2 RU and mounts to 19 inch and 23 inch racks and cabinets. The patch panel offers front access, includes label pockets with preprinted labels for easy identification, and is black.

The Mini-Com® Faceplate Angled Modular Patch Panel accepts up to 24 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, includes label pockets for easy identification, and is black.

The Mini-Com® Faceplate Angled Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 2 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, includes label pockets for easy identification, and is black.

The Mini-Com® Faceplate Angled Modular Patch Panel accepts up to 72 Mini-Com Modules for unshielded applications in 2 RU and mounts to 19 inch and 23 inch racks and cabinets. The patch panel offers front access, includes label pockets with preprinted labels for easy identification, and is black.

The Mini-Com® Faceplate Wall Mount Modular Patch Panel accepts up to 12 Mini-Com Modules for unshielded applications. The panel offers front access and can be identified with adhesive labels and is black.

The DataPatch 12-port Category 5e Flat Punchdown Patch Panel in Black. Mounts to the 89D bracket.

The DataPatch 24-port Category 5e Flat Punchdown Patch Panel in Black. 1RU.

PchDownPtchPnl,Cat6A,Flat,24-port,EA

The DataPatch 48-port Category 5e Flat Punchdown Patch Panel in Black. 2RU.

PchDownPtchPnl,Cat6A,Flat,48Pt,2RU,EA

The DataPatch 12-port Category 6 Flat Punchdown Patch Panel in Black. Mounts to the 89D bracket.

PchDownPtchPnl,Cat6,Flat,24-port,EA

Cat6 Punchdown Patch Panel, 48 Port, Black.

The DataPatch 24-port Category 5e Angled Punchdown Patch Panel in Black. 1RU.

Punchdown patch panel, 24-port, angled, black

The DataPatch 48-port Category 5e Angled Punchdown Patch Panel in Black. 2RU.

Punchdown patch panel, 48-port, angled, black

Punchdown patch panel, 24-port, angled, black

Cat 6 Punchdown Patch Panel, 48 Port, Angled.

The blanking panel helps force cold air to be transferred through the active equipment rather than being transferred directly to the hot aisle. The panel minimizes bypass airflow in racks and cabinets, optimizing cooling efficiency. The panel is 1 RU and is black.

The DataPatch 48-port, Category 5e, Punchdown Patch Panel with 24 RJ45, 8-position, 8-wire ports. Label kit (DPLK24) and strain relief bar (SRB19BL) included. Cable strain relief bar extends 2" off of the rack to support cables in punchdown patch panel applications.

The DataPatch 48-port, Category 6, Punchdown Patch Panel with 24 RJ45, 8-position, 8-wire ports. Label kit (DPLK24) and strain relief bar (SRB19BL) included. Cable strain relief bar extends 2" off of the rack to support cables in punchdown patch panel applications.

The keystone shielded patch panel accepts up to 24 keystone shielded jack modules with a 15° angle, is 1 RU and mounts to 19 inch and 23 inch racks and cabinets. It has a flat design and is made of stainless steel construction. The panel includes a strain relief bar, can be identified with adhesive labels, and is black.

The keystone shielded patch panel accepts up to 24 keystone shielded jack modules in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. It has a flat design and is made of stainless steel construction. The panel includes a built-in strain relief bar, label pockets for easy identification, and is black.

The keystone shielded angled patch panel accepts up to 24 keystone shielded jack modules in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. It has an angled design and includes a built-in strain relief bar, label pockets for easy identification, and is black.

The keystone shielded angled patch panel accepts up to 48 keystone shielded jack modules in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. It has an angled design and includes a built-in strain relief bar, label pockets for easy identification, and is black.

The keystone shielded patch panel accepts up to 24 keystone shielded jack modules in 1 RU. It has a flat design and is made of stainless steel construction. The panel includes label pockets for easy identification and is black.

The NetKey® Flat Punchdown Keystone Patch Panel terminates 4-pair, 22–26 AWG, 100-ohm twisted pair cable. These Cat 5e patch panels mount to an 89D bracket and incudes 12 ports. The RJ45 interface provides a quick plug and play connection to RJ45 patch cords. This punchdown patch panel is made of steel and is black.

The NetKey® Flat Punchdown Keystone Patch Panel terminates 4-pair, 22–26 AWG, 100-ohm twisted pair cable. These Cat 5e patch panels mount to 19" and 23" racks and incudes 24 ports. The RJ45 interface provides a quick plug and play connection to RJ45 patch cords. This punchdown patch panel is 1 RU, made of steel and is black.

The NetKey® Flat Punchdown Keystone Patch Panel terminates 4-pair, 22–26 AWG, 100-ohm twisted pair cable. These Cat 5e patch panels mount to 19" and 23" racks and incudes 48 ports. The RJ45 interface provides a quick plug and play connection to RJ45 patch cords. This punchdown patch panel is 2 RU, made of steel and is black.

The NetKey® Flat Punchdown Keystone Patch Panel terminates 4-pair, 22–26 AWG, 100-ohm twisted pair cable. These Cat 6 patch panels mount to an 89D bracket and incudes 12 ports. The RJ45 interface provides a quick plug and play connection to RJ45 patch cords. This punchdown patch panel is made of steel and is black.

The NetKey® Flat Punchdown Keystone Patch Panel terminates 4-pair, 22–26 AWG, 100-ohm twisted pair cable. These Cat 6 patch panels mount to 19" and 23" racks and incudes 24 ports. The RJ45 interface provides a quick plug and play connection to RJ45 patch cords. This punchdown patch panel is 1 RU, made of steel and is black.

The NetKey® Flat Punchdown Keystone Patch Panel terminates 4-pair, 22–26 AWG, 100 ohm twisted pair cable. These Cat 6 patch panels mount to 19" and 23" racks and incudes 48 ports. The RJ45 interface provides a quick plug and play connection to RJ45 patch cords. This punchdown patch panel is 2 RU, made of steel and is black.

The NetKey® Cat 6A UTP Flat Punchdown Patch Panel terminates 4-pair, 22–26 AWG, twisted pair cable. These Cat 6A patch panels mount to 19 inch and 23 inch racks and incude 24 ports. Each module is 100% factory tested to exceed industry standard performance requirements, and are individually serialized for traceability. The punchdown patch panel is 1 RU, made of steel, and is black.

The NetKey® Cat 6A UTP Flat Punchdown Patch Panel terminates 4-pair, 22–26 AWG, twisted pair cable. These Cat 6A patch panels mount to 19 inch and 23 inch racks and incude 48 ports. Each module is 100% factory tested to exceed industry standard performance requirements, and are individually serialized for traceability. The punchdown patch panel is 2 RU, made of steel, and is black.

The NetKey® Cat 6 UTP Angled Punchdown Patch Panel terminates 4-pair, 22–26 AWG, twisted pair cable. These Cat 6 patch panels mount to 19 inch and 23 inch racks and incude 24 ports. Each module is 100% factory tested to exceed industry standard performance requirements, and are individually serialized for traceability. The angled design facilitates proper bend radius control and minimizes the need for horizontal cable managers. This punchdown patch panel is 1 RU, made of steel, and is black.

The NetKey® Cat 6 UTP Angled Punchdown Patch Panel terminates 4-pair, 22–26 AWG, twisted pair cable. These Cat 6 patch panels mount to 19 inch and 23 inch racks and incude 48 ports. Each module is 100% factory tested to exceed industry standard performance requirements, and are individually serialized for traceability. The angled design facilitates proper bend radius control and minimizes the need for horizontal cable managers. This punchdown patch panel is 2 RU, made of steel, and is black.

The NetKey® Cat 6A UTP Angled Punchdown Patch Panel terminates 4-pair, 22–26 AWG, twisted pair cable. These Cat 6A patch panels mount to 19 inch and 23 inch racks and incude 24 ports. Each module is 100% factory tested to exceed industry standard performance requirements, and are individually serialized for traceability. The angled design facilitates proper bend radius control and minimizes the need for horizontal cable managers. This punchdown patch panel is 1 RU, made of steel, and is black.

The NetKey® Cat 6A UTP Angled Punchdown Patch Panel terminates 4-pair, 22–26 AWG, twisted pair cable. These Cat 6A patch panels mount to 19 inch and 23 inch racks and incude 48 ports. Each module is 100% factory tested to exceed industry standard performance requirements, and are individually serialized for traceability. The angled design facilitates proper bend radius control and minimizes the need for horizontal cable managers. This punchdown patch panel is 2 RU, made of steel, and is black.

The NetKey® Faceplate Modular Patch Panel accepts up to 12 keystone modules for unshielded applications and mounts vertically to 89D brackets. The panel offers front access, can be identified with adhesive labels, and is black.

The NetKey® Faceplate Modular Patch Panel accepts up to 24 keystone modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, can be identified with adhesive labels, includes a strain relief bar, and is black.

The NetKey® Faceplate Modular Patch Panel accepts up to 24 keystone modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, can be identified with adhesive labels, and is black.

The NetKey® Faceplate Modular Patch Panel accepts up to 48 keystone modules for unshielded applications in 2 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, can be identified with adhesive labels, includes strain relief bars, and is black.

The NetKey® Faceplate Modular Patch Panel accepts up to 48 keystone modules for unshielded applications in 2 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, can be identified with adhesive labels, and is black.

The NetKey® Faceplate Angled Modular Patch Panel accepts up to 24 keystone modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, can be identified with adhesive labels, and is black.

The NetKey® Faceplate Angled Modular Patch Panel accepts up to 48 keystone modules for unshielded applications in 2 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, can be identified with adhesive labels, and is black.

The NetKey® Faceplate Angled Modular Patch Panel accepts up to 24 keystone modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, includes labels and covers, and is black.

The NetKey® Faceplate Modular Patch Panel accepts up to 24 keystone modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, includes labels and covers, and is black.

The NetKey® Faceplate Modular Patch Panel accepts up to 48 keystone modules for unshielded applications in 2 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access, includes labels and covers, and is black.

The NetKey® Flush Mount Modular Patch Panel accepts up to 24 keystone modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel mounts flush with the rack, can be identified with adhesive labels, and is black.

The NetKey® Flush Mount Modular Patch Panel accepts up to 48 keystone modules for unshielded applications in 2 RU and mounts to 19 inch and 23 inch racks and cabinets. The patch panel includes pre-printed numbers that follow a vertical sequence. The panel mounts flush with the rack, can be identified with adhesive labels, and is black.

The NetKey® Flush Mount Modular Patch Panel accepts up to 48 keystone modules for unshielded applications in 2 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel mounts flush with the rack, can be identified with adhesive labels, and is black.

The NetKey High Density Modular Patch Panel accepts up to 48 keystone modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel is black.

The NetKey® Flush Mount Angled Modular Patch Panel accepts up to 24 keystone modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel mounts flush with the rack, can be identified with adhesive labels, and is black.

The NetKey® Flush Mount Angled Modular Patch Panel accepts up to 48 keystone modules for unshielded applications in 2 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel mounts flush with the rack, can be identified with adhesive labels, and is black.

The NetKey High Density Angled Modular Patch Panel accepts up to 48 keystone modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The patch panel is black.

The QuickNet™ Angled Patch Panel accepts QuickNet Pre-Terminated Cassettes and Patch Panel Adapters. These high-density patch panels conserve valuable rack space and, due to the angle, they facilitate proper bend radius control and minimize the need for horizontal cable managers. The patch panel is 24 port in 1 RU and black.

The QuickNet™ Angled Patch Panel accepts QuickNet Pre-Terminated Cassettes and Patch Panel Adapters. These high-density patch panels conserve valuable rack space and, due to the angle, they facilitate proper bend radius control and minimize the need for horizontal cable managers. The patch panel is 48 port in 1 RU and black.

QN PATCH PANEL, VERTICAL PRINTED PORTS, ANGLED, 48 PORT, 1 RU

The QuickNet™ Angled All Metal Patch Panel accepts Shielded QuickNet Pre-Terminated Cassettes and Patch Panel Adapters with no additional grounding kit required. These high-density patch panels conserve valuable rack space and, due to the angle, they facilitate proper bend radius control and minimize the need for horizontal cable managers. The patch panel 24 port in 1 RU and black.`

The QuickNet™ Angled All Metal Patch Panel accepts Shielded QuickNet Pre-Terminated Cassettes and Patch Panel Adapters with no additional grounding kit required. These high-density patch panels conserve valuable rack space and, due to the angle, they facilitate proper bend radius control and minimize the need for horizontal cable managers. The patch panel 48 port in 1 RU and black.`

The QuickNet™ Patch Panel accepts QuickNet Pre-Terminated Cassettes and Patch Panel Adapters. These high-density patch panels conserve valuable rack space and mount to standard EIA 19" racks or 23" racks with optional extender brackets. The patch panel 24 port in 1 RU and black.

The QuickNet™ Patch Panel accepts QuickNet Pre-Terminated Cassettes and Patch Panel Adapters. These high-density patch panels conserve valuable rack space and mount to standard EIA 19" racks or 23" racks with optional extender brackets. The patch panel 48 port in 1 RU and black.

QN PATCH PANEL, VERTICAL PRINTED PORTS, FLAT, 48 PORT, 1RU

The QuickNet ™ Patch Panel Adapter is an optional accessory for use with QuickNet Patch Panels. The adapter accepts up to six Mini-Com® Modules for unshielded, fiber optic, and audio/visual applications. The adapter is black.

The QuickNet™ Patch Panel Blank is an optional accessory for use in QuickNet Patch Panels that promotes proper airflow and cooling throughout data centers. The adapter is black.

The QuickNet™ Shielded Patch Panel accepts QuickNet Pre-terminated Cassettes and Patch Panel Adapters. These high-density patch panels conserve valuable rack space with no additional grounding kit required. The patch panel is 24 port in 1 RU and black.

The QuickNet™ Shielded Patch Panel accepts QuickNet Pre-terminated Cassettes and Patch Panel Adapters. These high-density patch panels conserve valuable rack space with no additional grounding kit required. The patch panel is 48 port in 1 RU and black.

The Shielded Keystone Patch Panel accepts up to 24 Shielded Keystone Jack Modules in 1 RU. The panel has a flat design made of stainless-steel construction that includes a grounding lug and mounts to 19-inch racks and cabinets. The patch panel has faceplates in the front allowing modules to mount flush with the panel, faceplate has label pockets and includes pre-printed labels and label covers and is black.

The Shielded Keystone Patch Panel accepts up to 24 Shielded Keystone Jack Modules in 1 RU. The panel has an angled design made of stainless steel construction that includes a grounding lug and mounts to 19 inch racks and cabinets. The patch panel has faceplates in the front allowing modules to mount flush with the panel, faceplate has label pockets and includes pre-printed labels and label covers and is black.

Strain Relief Bar extends 2.8" off the rack; supports, manages and provides bend radius protection.

Strain Relief Bar extends 4.5" off the rack; supports, manages and provides bend radius protection.

Strain relief bar, inward mounting, black

Strain Relief Bar extends 4.5" off the rack; supports, manages and provides bend radius protection. Black.

Strain Relief Bar extends 7.5" off the rack; supports, manages and provides bend radius protection. Black.

Strain relief bar, multi-depth, black

Quick release bracket kit, black

Strain relief bar with integrated adjustable clips kitted with Quick Release Brackets, supports up to 24 cables and is black.

Strain relief bar with raised tie mounts, includes 6 Tak-Ty ® Hook & Loop Cable ties, can support and manage up to 72 cables, includes easy release mounting feature and is black.

Pivoting strain relief bar features a rear flange with built-in cascade support to improve cable routing, includes up and down swivel motion to allow easy access to connections.

Strain relief bar is straight and helps to support and manage cables, package of 10 and is black.

Strain relief bar with integrated adjustable clips, supports up to 24 cables, includes easy release mounting feature and is black.

The Mini-Com® Ultimate ID® Modular Patch Panel accepts up to 24 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access and includes label pockets for easy identification (labels are not included). The patch panel is black.

The Mini-Com® Ultimate ID® Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 2 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access and includes label pockets for easy identification (labels are not included). The patch panel is black.

The Mini-Com® Ultimate ID® Angled Modular Patch Panel accepts up to 24 Mini-Com Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access and includes label pockets for easy identification (labels are not included). The patch panel is black.

The Mini-Com® Ultimate ID® Angled Modular Patch Panel accepts up to 48 Mini-Com Modules for unshielded applications in 2 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access and includes label pockets for easy identification (labels are not included). The patch panel is black.

The Mini-Com® Ultimate ID® Modular Patch Panel Kit includes 24 Cat 6 TG Jack Modules for unshielded applications in 1 RU and mounts to 19 inch and 23 inch racks and cabinets. The panel offers front access and includes label pockets for easy identification (labels are not included). The patch panel is black.