Panduit copper cable

IndustrialNet™ Copper Cable, Industrial Ethernet, Category 5e, 2-pair, 24/7 AWG, SF/UTP, CMX/CM, 600V AWM, High flex, Oil and sunlight resistant, Abrasion and weld splatter resistant, TPE jacket, Black, 1000ft/305m reel

This Cat 5e SF/UTP copper cable is constructed of 24/7 AWG stranded copper conductors with HDPE insulation. The copper conductors are twisted in pairs and wrapped with a foam polypropylene tape to form a core. Both pairs are surrounded by an overall braided shield and metallic foil and covered with a thermoplastic elastomer (TPE) jacket. The cable is supplied 305 meters (1,000 feet) to a reel and teal.

The Cat 5e SF/UTP copper cable is constructed of 24/7 AWG stranded copper conductors with a High Density Polyethylene (HDPE) insulation. The twisted pair copper conductors are wrapped with a foam polypropylene tape to form a core. All four pairs are surrounded by an overall braided shield and metallic foil and covered with a thermoplastic elastomer (TPE) jacket. The cable is supplied 305 meters (1,000 feet) to a reel and black jacketing.

The Cat 5e SF/UTP copper cable is constructed of 24/7 AWG stranded copper conductors with a HDPE insulation. The copper conductors are twisted in pairs and wrapped with a foam polypropylene tape to form a core. All four pairs are surrounded by an overall braided shield and metallic foil and covered with a thermoplastic elastomer (TPE) jacket. The cable is supplied 305 meters (1,000 feet) to a reel and teal.

The Cat 6A SF/UTP copper cable is constructed of 24/7AWG stranded copper conductors with HDPE polyethylene insulation. The copper conductors are twisted in pairs and wrapped with a foam polypropylene tape to form a core. All four pairs are surrounded by an overall braided shield and metallic foil and covered with a thermoplastic elastomer (TPE) jacket. The cable is supplied 305 meters (1,000 feet) to a reel and teal.

IndustrialNet™ Copper Cable, Industrial Ethernet, Category 5e, 2-pair, 24/7 AWG, SF/UTP, Flame retardant, High flex, Oil and ozone resistant, Abrasion resistant, PUR jacket, Red, 1640ft/500m reel

The Cat 5e SF/UTP copper cable is constructed of 24/7 AWG stranded copper conductors with PE insulation. The copper conductors are twisted in pairs and wrapped by an overall metallic foil and braided shield and covered with a polyurethane (PUR) jacket which is oil, ozone, and abrasion-resistant. The cable is supplied 500 meters (1640 feet) to a reel and teal.

Copper Cable, Industrial, Cat6A 4-pair, 24/7 AWG Stranded, S/FTP, PUR, 500m reel

The NetKey® Cat 6 shielded F/UTP copper cable is constructed of 24 AWG copper conductors with HDPE insulation. The conductors are twisted in pairs and separated by a cross divider. All four pairs are surrounded by an overall metallic foil shield and CM jacket. The white CM cable is supplied 305 meters (1,000 feet) to a reel.

The NK5e™ Cat 5e U/UTP CM copper cable is constructed of 24 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs. All four pairs shall be covered by a flame retardant PVC (CM), Blue jacket. Packaged 1000 ft./305m in an easy payout carton.

Category 5e cable shall meet ANSI/TIA-568.2-E Category 5e and ISO 11801 Class D channel standards. The conductors shall be 24 AWG copper insulated with HDPE. The copper conductors shall be twisted in pairs and all four pairs shall be covered by flame retardant PVC (CM) jacket.

Category 5e cable shall meet ANSI/TIA-568.2-E Category 5e and ISO 11801 Class D channel standards. The conductors shall be 24 AWG copper insulated with HDPE. The copper conductors shall be twisted in pairs and all four pairs shall be covered by flame retardant PVC (CM) jacket.

Category 5e cable shall meet ANSI/TIA-568.2-E Category 5e and ISO 11801 Class D channel standards. The conductors shall be 24 AWG copper insulated with HDPE. The copper conductors shall be twisted in pairs and all four pairs shall be covered by flame retardant PVC (CM) jacket.

The NK6™ Cat 6 copper cable is constructed of 24 AWG copper conductors with high-density polyethylene (HDPE) insulation. The copper conductors shall be twisted in pairs and separated by a cross divider and covered by a flame retardant PVC (CM) Intl. Blue jacket.

The NK6™ Cat 6 copper cable is constructed of 24 AWG copper conductors with high-density polyethylene (HDPE) insulation. The copper conductors shall be twisted in pairs and separated by a cross divider and covered by a flame retardant PVC (CM) Intl. Gray jacket.

The NK6™ Cat 6 copper cable is constructed of 24 AWG copper conductors with high-density polyethylene (HDPE) insulation. The copper conductors shall be twisted in pairs and separated by a cross divider and covered by a flame retardant PVC (CM) Intl. White jacket.

The NK6™ Cat 6 U/UTP CM copper cable is constructed of 24 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CM), Blue jacket. Packaged 1000 ft./305m in an easy payout carton.

Category 6 U/UTP copper cable shall meet ANSI/TIA-568.2-E Category 6 and ISO 11801 Class E channel standards. The conductors shall be 24 AWG copper insulated with HDPE. The copper conductors shall be twisted in pairs and covered by a flame-retardant PVC (CM) jacket.

Category 6 U/UTP copper cable shall meet ANSI/TIA-568.2-E Category 6 and ISO 11801 Class E channel standards. The conductors shall be 24 AWG copper insulated with HDPE. The copper conductors shall be twisted in pairs and covered by a flame-retardant PVC (CM) jacket.

Category 6 U/UTP copper cable shall meet ANSI/TIA-568.2-E Category 6 and ISO 11801 Class E channel standards. The conductors shall be 24 AWG copper insulated with HDPE. The copper conductors shall be twisted in pairs and covered by a flame-retardant PVC (CM) jacket.

The NK5e™ Cat 5e U/UTP LSZH copper cable is constructed of 24 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs. All four pairs shall be covered by a flame retardant HDPE (LSZH), Blue jacket. Packaged 1000 ft./305m in an easy payout carton.

The NK5e™ Cat 5e U/UTP LSZH copper cable is constructed of 24 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs. All four pairs shall be covered by a flame retardant HDPE (LSZH), White jacket. Packaged 1000 ft./305m in an easy payout carton.

The NK6™ Cat 6 U/UTP LSZH copper cable is constructed of 24 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant HDPE (LSZH), Gray jacket. Packaged 1000 ft./305m in an easy payout carton.

The NK6™ Cat 6 U/UTP LSZH copper cable is constructed of 24 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs. All four pairs shall be covered by a flame retardant HDPE (LSZH), Blue jacket. Packaged 1000 ft./305m in an easy payout carton.

The NK6™ Cat 6 U/UTP LSZH copper cable is constructed of 24 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs. All four pairs shall be covered by a flame retardant HDPE (LSZH), White jacket. Packaged 1000 ft./305m in an easy payout carton.

The NetKey™ Cat 6A U/UTP copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The conductors are twisted in pairs with an alien crosstalk barrier. All four pairs are surrounded by a HDPE flame-retardant jacket. The blue, LSZH (IEC 60332-1, EuroClass Dca-s2,d2,a1) cable is supplied 305 meters (1,000 feet) to a reel.

The NK5e™ Cat 5e U/UTP Riser copper cable is constructed of 24 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs. All four pairs shall be covered by a flame retardant PVC (CMR), Blue jacket. Packaged 1000 ft./305m in an easy payout carton.

The NK6™ Cat 6 U/UTP Riser copper cable is constructed of 24 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Blue jacket. Packaged 1000 ft./305m in an easy payout carton.

Category 6 U/UTP copper cable shall meet ANSI/TIA-568.2-E Category6 and ISO 11801 Class E channel standards. The conductors shall be24 AWG copper insulated with HDPE. The copper conductors shall betwisted in pairs, separated by a cross divider and covered by a flameretardant PVC (CMR) jacket.

Category 6 U/UTP copper cable shall meet ANSI/TIA-568.2-E Category6 and ISO 11801 Class E channel standards. The conductors shall be24 AWG copper insulated with HDPE. The copper conductors shall betwisted in pairs, separated by a cross divider and covered by a flameretardant PVC (CMR) jacket.

Category 6 U/UTP copper cable shall meet ANSI/TIA-568.2-E Category6 and ISO 11801 Class E channel standards. The conductors shall be24 AWG copper insulated with HDPE. The copper conductors shall betwisted in pairs, separated by a cross divider and covered by a flameretardant PVC (CMR) jacket.

Copper Cable, Cat 6, 4-PR, 24 AWG, U/UTP, PVC, Blue, Euro Pallet, 1000ft/305m

Copper Cable, Cat 6, 4-PR, 24 AWG, U/UTP, PVC, Intl. Gray, Euro Pallet, 1000ft/305m

Copper Cable, Cat 6, 4-PR, 24 AWG, U/UTP, PVC, White, Euro Pallet, 1000ft/305m

The TX6A™ Cat 6A shielded F/UTP copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The conductors are twisted in pairs and separated by a cross divider. All four pairs are surrounded by an overall metallic foil shield within a HDPE flame-retardant jacket. The blue, LSZH (IEC 60332-3) cable is supplied 305 meters (1,000 feet) to a reel.

The TX6A™ Cat 6A shielded F/UTP copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The conductors are twisted in pairs and separated by a cross divider. All four pairs are surrounded by an overall metallic foil shield within a HDPE flame-retardant jacket. The white, LSZH (IEC 60332-3) cable is supplied 305 meters (1,000 feet) to a reel.

The TX6A™ Cat 6A F/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are twisted in pairs, separated by a cross divider and covered by an overall metallic shield and a flame retardant PVC (CMR), White jacket. Packaged 1000ft/305m on a reel

Dual Locking IT Power Cord, IEC C14 to IEC C15/C13, 2 ft (0.6 m), Black, 10 PACK

Dual Locking IT Power Cord, IEC C14 to IEC C15/C13, 2 ft (0.6 m), Blue, 10 PACK

Dual Locking IT Power Cord, IEC C14 to IEC C15/C13, 2 ft (0.6 m), Red, 10 PACK

Dual Locking IT Power Cord, IEC C14 to IEC C15/C13, 4 ft (1.2 m), Black, 10 PACK

Dual Locking IT Power Cord, IEC C14 to IEC C15/C13, 4 ft (1.2 m), Blue, 10 PACK

Dual Locking IT Power Cord, IEC C14 to IEC C15/C13, 4 ft (1.2 m), Red, 10 PACK

Dual Locking IT Power Cord, IEC C14 to IEC C15/C13, 6 ft (1.8 m), Black, 10 PACK

Dual Locking IT Power Cord, IEC C14 to IEC C15/C13, 6 ft (1.8 m), Blue, 10 PACK

Dual Locking IT Power Cord, IEC C14 to IEC C15/C13, 6 ft (1.8 m), Red, 10 PACK

Dual Locking IT Power Cord, IEC C14 to IEC C15/C13, 8 ft (2.4 m), Black, 10 PACK

Dual Locking IT Power Cord, IEC C14 to IEC C15/C13, 8 ft (2.4 m), Blue, 10 PACK

Dual Locking IT Power Cord, IEC C14 to IEC C15/C13, 8 ft (2.4 m), Red, 10 PACK

The TX7000™ Cat 7 S/FTP LSZH copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are individually shielded, twisted in pairs and covered by an overall braided shield and a HDPE flame retardant (LSZH), Blue jacket. Packaged 1640ft/500m on a reel

The TX7000™ Cat 7 S/FTP LSZH copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are individually shielded, twisted in pairs and covered by an overall braided shield and a HDPE flame retardant (LSZH), Gray jacket. Packaged 1640ft/500m on a reel

The TX7000™ Cat 7 S/FTP LSZH copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are individually shielded, twisted in pairs and covered by an overall braided shield and a HDPE flame retardant (LSZH), White jacket. Packaged 1640FT/500M on a reel

IndustrialNet™ Copper Cable, Industrial Ethernet, Harsh Environment, Marine Grade, Category 7, 4-pair, 23 AWG stranded, S/FTP, LSZH, Oil and fuel resistant, SHF1 compliant, HDPE jacket, Blue, DNV/GL and ABS certified, 3280ft/1000m reel

Category 7 low smoke, halogen free, fire retardant (LSHF-FR), 4-pair S/FTP shielded marine copper cable. Stranded copper conductors are 4 x 2/0.27mm+2+. Conductors are twisted in pairs, each individual twisted pair is surrounded by a foil, covered with an overall braided shield and is protected by an oil and fuel resistant, low smoke, halogen free, and fire retardant jacket.

IndustrialNet™ Copper Cable, Industrial Ethernet, Harsh Environment, Marine Grade, Category 7, 4-pair, 22 AWG stranded, S/FTP, LSZH, Oil and fuel resistant, UV and MUD resistant, SHF2 compliant, HDPE jacket, Black, DNV/GL and ABS certified, 1640ft/500m reel

IndustrialNet™ Copper Cable, Industrial Ethernet, Harsh Environment, Marine Grade, Category 7, 4-pair, 22 AWG stranded, S/FTP, LSZH, Oil and fuel resistant, UV and MUD resistant, SHF2 compliant, HDPE jacket protected by stainless steel armor and secondary jacket, Black, DNV/GL and ABS certified, 1640ft/500m reel

The TX6™ Cat 6 copper cable is constructed of 24 AWG copper conductors with high-density polyethylene (HDPE) insulation. The copper conductors shall be twisted in pairs and separated by a cross divider and covered by a flame retardant PVC (CM) blue jacket.

The NK6™ Cat 6 U/UTP CM copper cable is constructed of 24 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CM), Gray jacket. Packaged 1000 ft./305m in an easy payout carton.

The TX6™ Cat 6 copper cable is constructed of 24 AWG copper conductors with high-density polyethylene (HDPE) insulation. The copper conductors shall be twisted in pairs and separated by a cross divider and covered by a flame retardant PVC (CM) white jacket.

The TX3000™ Cat 3 U/UTP CM 25-pair copper cable is constructed of 26 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a flame retardant PVC (CM), Gray jacket. Packaged 1000 ft./305m on a reel.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame retardant PVC (CM) jacket.

The TX6000™ Enhanced Cat 6 U/UTP copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are twisted in pairs and separated by a cross divider. All four pairs are surrounded by a PVC flame-retardant jacket. The blue, CM cable is supplied 305 meters (1,000 feet) to an easy pay-out carton.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame retardant PVC (CM) jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame retardant PVC (CM) jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame retardant PVC (CM) jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame retardant PVC (CM) jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame retardant PVC (CM) jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame retardant PVC (CM) jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame retardant PVC (CM) jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame retardant PVC (CM) jacket.

The TX3000™ Cat 3 U/UTP CM 100-pair copper cable is constructed of 26 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a flame retardant PVC (CM), Gray jacket. Packaged 1000 ft./305m on a reel.

Copper Cable, Category 6, 4-Pair, 28 AWG, U/UTP, CM/LSZH (IEC60332-1/LSZH (IEC 60332-3), Euroclass Eca, Blue, 1000 feet / 305 meters

Copper Cable, Category 6, 4-Pair, 28 AWG, U/UTP, CM/LSZH (IEC60332-1/LSZH (IEC 60332-3), Euroclass Eca, Intl Gray, 1000 feet / 305 meters

Copper Cable, Category 6, 4-Pair, 28 AWG, U/UTP, CM/LSZH (IEC60332-1/LSZH (IEC 60332-3), Euroclass Eca, White, 1000 feet / 305 meters

The TX6A™ Cat 6A U/FTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP insulation. The copper conductors are individually shielded, twisted in pairs and covered by a flame retardant PVC (CMP), Black jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/FTP Plenum copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are individually shielded, twisted in pairs and covered by a flame retardant PVC (CMP), Blue jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/UTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP insulation. The copper conductors shall be twisted in pairs, separated by a cross divider and covered by a flame retardant PVC (CMP), Green jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/FTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP insulation. The copper conductors are individually shielded, twisted in pairs and covered by a flame retardant PVC (CMP), Gray jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/FTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP insulation. The copper conductors are individually shielded, twisted in pairs and covered by a flame retardant PVC (CMP), Orange jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/FTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP insulation. The copper conductors are individually shielded, twisted in pairs and covered by a flame retardant PVC (CMP), Red jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/FTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP insulation. The copper conductors are individually shielded, twisted in pairs and covered by a flame retardant PVC (CMP), Violet jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/FTP Plenum copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are individually shielded, twisted in pairs and covered by a flame retardant PVC (CMP), White jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/FTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP insulation. The copper conductors are individually shielded, twisted in pairs and covered by a flame retardant PVC (CMP), Yellow jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/FTP Riser copper cable is constructed of 26 AWG copper conductors with HDPE insulation. The copper conductors are individually shielded, twisted in pairs and covered by a flame retardant PVC (CMR), Black jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/FTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are individually shielded, twisted in pairs and covered by a flame retardant PVC (CMR), Blue jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/FTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are individually shielded, twisted in pairs and covered by a flame retardant PVC (CMR), Green jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/FTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are individually shielded, twisted in pairs and covered by a flame retardant PVC (CMR), Gray jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/FTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are individually shielded, twisted in pairs and covered by a flame retardant PVC (CMR), Orange jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/FTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are individually shielded, twisted in pairs and covered by a flame retardant PVC (CMR), Red jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/FTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are individually shielded, twisted in pairs and covered by a flame retardant PVC (CMR), Violet jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/FTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are individually shielded, twisted in pairs and covered by a flame retardant PVC (CMR), White jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/FTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are individually shielded, twisted in pairs and covered by a flame retardant PVC (CMR), Yellow jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/UTP LSZH copper cable is constructed of 26 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs, separated by a cross divider and covered by a HDPE flame retardant (LSZH), White jacket. Packaged 1000ft/305m on a reel

The TX6A™ Cat 6A U/UTP copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are twisted in pairs and separated by a cross divider. All four pairs are surrounded by a Vari-MaTriX Tape and a flame-retardant HDPE flame-retardant jacket. The blue, LSZH (IEC 60332-3, EuroClass Dca-s2,d2,a1) cable is supplied 305 meters (1,000 feet) to a reel.

Category 6A/Class EA cable shall be constructed of 23 AWGcopper conductors with HDPE Low Smoke Zero Halogen (LSZH),insulation. The copper conductors shall be twisted in pairsand separated by a tape-style divider. All four pairs shall besurrounded by a metallic AXT barrier tape and a flame retardantjacket. The AXT barrier tape shall suppress the effects of aliencrosstalk while retaining UTP electromagnetic interferenceimmunity.

Category 6A/Class EA cable shall be constructed of 23 AWGcopper conductors with HDPE Low Smoke Zero Halogen (LSZH),insulation. The copper conductors shall be twisted in pairsand separated by a tape-style divider. All four pairs shall besurrounded by a metallic AXT barrier tape and a flame retardantjacket. The AXT barrier tape shall suppress the effects of aliencrosstalk while retaining UTP electromagnetic interferenceimmunity.

The TX3000™ Cat 3 U/UTP LSZH 25-pair copper cable is constructed of 26 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a flame retardant HDPE (LSZH), Gray jacket. Packaged 1000 ft./305m on a reel.

The TX3000™ Cat 3 U/UTP LSZH 50-pair copper cable is constructed of 26 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a flame retardant HDPE (LSZH), Gray jacket. Packaged 1000 ft./305m on a reel.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-E Category 6 component standards. The conductors shall be 23 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs, separated by a cross divider, and all four pairs shall be covered by a LSZH jacket.

The TX6000™ Cat 6 U/UTP LSZH copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant HDPE (LSZH), Blue jacket. Packaged 1000 ft./305m on a reel in a box.

The TX6000™ Enhanced Cat 6 U/UTP copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are twisted in pairs and separated by a cross divider. All four pairs are surrounded by a HDPE flame-retardant jacket. The blue, LSZH (IEC 60332-1, IEC 60332-3-22, EuroClass Dca-s2,d2,a1) cable is supplied 305 meters (1,000 feet) to an easy pay-out carton.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-E Category 6 component standards. The conductors shall be 23 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs, separated by a cross divider, and all four pairs shall be covered by a LSZH jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-E Category 6 component standards. The conductors shall be 23 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs, separated by a cross divider, and all four pairs shall be covered by a LSZH jacket.

The TX6000™ Cat 6 U/UTP LSZH copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant HDPE (LSZH), Gray jacket. Packaged 1000 ft./305m on a reel in a box.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-E Category 6 component standards. The conductors shall be 23 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs, separated by a cross divider, and all four pairs shall be covered by a LSZH jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-E Category 6 component standards. The conductors shall be 23 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs, separated by a cross divider, and all four pairs shall be covered by a LSZH jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-E Category 6 component standards. The conductors shall be 23 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs, separated by a cross divider, and all four pairs shall be covered by a LSZH jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-E Category 6 component standards. The conductors shall be 23 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs, separated by a cross divider, and all four pairs shall be covered by a LSZH jacket.

The TX6000™ Cat 6 U/UTP LSZH copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant HDPE (LSZH), White jacket. Packaged 1000 ft./305m on a reel in a box.

The TX6000™ Enhanced Cat 6 U/UTP copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are twisted in pairs and separated by a cross divider. All four pairs are surrounded by a HDPE flame-retardant jacket. The white, LSZH (IEC 60332-1, IEC 60332-3-22, EuroClass Dca-s2,d2,a1) cable is supplied 305 meters (1,000 feet) to an easy pay-out carton.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-E Category 6 component standards. The conductors shall be 23 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs, separated by a cross divider, and all four pairs shall be covered by a LSZH jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-E Category 6 component standards. The conductors shall be 23 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs, separated by a cross divider, and all four pairs shall be covered by a LSZH jacket.

The TX3000™ Cat 3 U/UTP LSZH 100-pair copper cable is constructed of 26 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a flame retardant HDPE (LSZH), Gray jacket. Packaged 1000 ft./305m on a reel.

The TX6™ U/UTP Outside Plant (OSP) Copper Cable is constructed of 23 AWG copper conductors with PE insulation. The cable has a gel-filled construction to prevent moisture migration in underground and wet applications. The conductors are twisted in pairs and covered by a UV-resistant and abrasion-resistant HDPE flame-retardant jacket. This cable is for duct and conduit installations only.

Category 6 OSP cable shall meet the ANSI/TIA-568.2-D Category 6 component standard. The conductors shall be 22 AWG construction with polyolefin insulation. The cable shall have a gel-filled construction to prevent moisture migration in wet applications and a wide temperature range for extreme weather environments. The copper conductors shall be twisted in pairs, separated by a pair separator and covered with a UV- and abrasion-resistant polyethylene (PE) jacket.

Category 6A OSP cable shall meet the ANSI/TIA-568.2-E Category 6A component Standard. The conductors shall be 23 AWG with polyolefin insulation. The cable shall have a gel-filled construction to prevent moisture migration in underground and wet applications and a wide temperature range for extreme weather environments. The copper conductors shall be twisted in pairs, separated by a pair separator, covered with an AXT barrier tape and a UV-resistant and abrasion-resistant polyethylene jacket.

The TX5e™ Cat 5e U/UTP Plenum copper cable is constructed of 24 AWG copper conductors with FEP/polyolefin insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMP), Blue jacket. Packaged 1000 ft./305m in an easy payout carton.

The TX5e™ Cat 5e U/UTP Plenum copper cable is constructed of 24 AWG copper conductors with FEP/polyolefin insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMP), White jacket. Packaged 1000 ft./305m in an easy payout carton.

The TX6A™ Vari-MaTriX HD Cat 6A U/UTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP insulation. The copper conductors shall be twisted in pairs. All four pairs shall be surrounded by a metallic Vari-MaTriX tape cut into segments of varying length and covered by a flame retardant PVC (CMP), Black jacket. Packaged 1000 ft./305m on a reel.

The TX6A™ Cat 6A copper cable is constructed of 23 AWG copper conductors with FEP Plenum (CMP) insulation. The copper conductors shall be twisted in pairs. All four pairs shall be surrounded by a metallic Vari-MaTriX tape cut into segments of varying length and a flame retardant, plenum-rated, blue jacket.

The TX6A™ Vari-MaTriX HD Cat 6A U/UTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP insulation. The copper conductors shall be twisted in pairs. All four pairs shall be surrounded by a metallic Vari-MaTriX tape cut into segments of varying length and covered by a flame retardant PVC (CMP), Green jacket. Packaged 1000 ft./305m on a reel.

The TX6A™ Vari-MaTriX HD Cat 6A U/UTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP insulation. The copper conductors shall be twisted in pairs. All four pairs shall be surrounded by a metallic Vari-MaTriX tape cut into segments of varying length and covered by a flame retardant PVC (CMP), Gray jacket. Packaged 1000 ft./305m on a reel.

The TX6A™ Vari-MaTriX HD Cat 6A U/UTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP insulation. The copper conductors shall be twisted in pairs. All four pairs shall be surrounded by a metallic Vari-MaTriX tape cut into segments of varying length and covered by a flame retardant PVC (CMP), Orange jacket. Packaged 1000 ft./305m on a reel.

The TX6A™ Vari-MaTriX HD Cat 6A U/UTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP insulation. The copper conductors shall be twisted in pairs. All four pairs shall be surrounded by a metallic Vari-MaTriX tape cut into segments of varying length and covered by a flame retardant PVC (CMP), Red jacket. Packaged 1000 ft./305m on a reel.

The TX6A™ Vari-MaTriX HD Cat 6A U/UTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP insulation. The copper conductors shall be twisted in pairs. All four pairs shall be surrounded by a metallic Vari-MaTriX tape cut into segments of varying length and covered by a flame retardant PVC (CMP), Violet jacket. Packaged 1000 ft./305m on a reel.

The TX6A™ Vari-MaTriX HD Cat 6A U/UTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP insulation. The copper conductors shall be twisted in pairs. All four pairs shall be surrounded by a metallic Vari-MaTriX tape cut into segments of varying length and covered by a flame retardant PVC (CMP), White jacket. Packaged 1000 ft./305m on a reel.

The TX6A™ Vari-MaTriX HD Cat 6A U/UTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP insulation. The copper conductors shall be twisted in pairs. All four pairs shall be surrounded by a metallic Vari-MaTriX tape cut into segments of varying length and covered by a flame retardant PVC (CMP), Yellow jacket. Packaged 1000 ft./305m on a reel.

The TX6500™ Cat 6 U/UTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP/polyolefin insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMP), Blue jacket. Packaged 1000 ft./305m on a reel in a box.

The TX6500™ Cat 6 U/UTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP/polyolefin insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMP), Gray jacket. Packaged 1000 ft./305m on a reel in a box.

The TX6500™ Cat 6 U/UTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP/polyolefin insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMP), Orange jacket. Packaged 1000 ft./305m on a reel in a box.

The TX6500™ Cat 6 U/UTP Plenum copper cable is constructed of 23 AWG copper conductors with FEP/polyolefin insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMP), Red jacket. Packaged 1000 ft./305m on a reel in a box.

The TX5e™ Cat 5e U/UTP Riser copper cable is constructed of 24 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs. All four pairs shall be covered by a flame retardant PVC (CMR), Blue jacket. Packaged 1000 ft./305m in an easy payout carton.

The TX5e™ Cat 5e U/UTP Riser copper cable is constructed of 24 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs. All four pairs shall be covered by a flame retardant PVC (CMR), White jacket. Packaged 1000 ft./305m in an easy payout carton.

The TX6A™ Cat 6A U/UTP copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are twisted in pairs and separated by a cross divider. All four pairs are surrounded by a Vari-MaTriX Tape and a flame-retardant PVC jacket. The blue, riser (CMR) cable is supplied 1,000 feet (305 meters) to a reel.

Category 6 UTP cable shall meet ANSI/TIA-568.2-E and IEC 61156-5Category 6 component standards. The conductors shall be 24 AWGcopper insulated with HDPE polymer. The copper conductors shall betwisted in pairs, separated by a cross divider and covered by a lowsmoke zero halogen or flame retardant PVC (CMR) jacket.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

The TX6™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Blue jacket. Packaged 1000 ft./305m in an easy payout carton.

The TX6™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Blue jacket. Packaged 1000 ft./305m in an easy payout carton.

Category 6 UTP cable shall meet ANSI/TIA-568.2-E and IEC 61156-5Category 6 component standards. The conductors shall be 24 AWGcopper insulated with HDPE polymer. The copper conductors shall betwisted in pairs, separated by a cross divider and covered by a lowsmoke zero halogen or flame retardant PVC (CMR) jacket.

The TX6™ Cat 6 U/UTP copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are twisted in pairs . All four pairs are surrounded by a PVC flame-retardant jacket. The blue, riser (CMR) cable is supplied 1,000 feet (305 meters) to an easy pay-out carton.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

The TX6™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Green jacket. Packaged 1000 ft./305m in an easy payout carton.

Category 6 UTP cable shall meet ANSI/TIA-568.2-E and IEC 61156-5Category 6 component standards. The conductors shall be 24 AWGcopper insulated with HDPE polymer. The copper conductors shall betwisted in pairs, separated by a cross divider and covered by a lowsmoke zero halogen or flame retardant PVC (CMR) jacket.

The TX6™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Green jacket. Packaged 1000 ft./305m in an easy payout carton.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

The TX6™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Gray jacket. Packaged 1000 ft./305m in an easy payout carton.

Category 6 UTP cable shall meet ANSI/TIA-568.2-E and IEC 61156-5Category 6 component standards. The conductors shall be 24 AWGcopper insulated with HDPE polymer. The copper conductors shall betwisted in pairs, separated by a cross divider and covered by a lowsmoke zero halogen or flame retardant PVC (CMR) jacket.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

The TX6™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Orange jacket. Packaged 1000 ft./305m in an easy payout carton.

Category 6 UTP cable shall meet ANSI/TIA-568.2-E and IEC 61156-5Category 6 component standards. The conductors shall be 24 AWGcopper insulated with HDPE polymer. The copper conductors shall betwisted in pairs, separated by a cross divider and covered by a lowsmoke zero halogen or flame retardant PVC (CMR) jacket.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

The TX6™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Red jacket. Packaged 1000 ft./305m in an easy payout carton.

Category 6 UTP cable shall meet ANSI/TIA-568.2-E and IEC 61156-5Category 6 component standards. The conductors shall be 24 AWGcopper insulated with HDPE polymer. The copper conductors shall betwisted in pairs, separated by a cross divider and covered by a lowsmoke zero halogen or flame retardant PVC (CMR) jacket.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

The TX6™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Violet jacket. Packaged 1000 ft./305m in an easy payout carton.

Category 6 UTP cable shall meet ANSI/TIA-568.2-E and IEC 61156-5Category 6 component standards. The conductors shall be 24 AWGcopper insulated with HDPE polymer. The copper conductors shall betwisted in pairs, separated by a cross divider and covered by a lowsmoke zero halogen or flame retardant PVC (CMR) jacket.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

The TX6™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), White jacket. Packaged 1000 ft./305m in an easy payout carton.

Category 6 UTP cable shall meet ANSI/TIA-568.2-E and IEC 61156-5Category 6 component standards. The conductors shall be 24 AWGcopper insulated with HDPE polymer. The copper conductors shall betwisted in pairs, separated by a cross divider and covered by a lowsmoke zero halogen or flame retardant PVC (CMR) jacket.

The TX6™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), White jacket. Packaged 1000 ft./305m in an easy payout carton.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

Category 6 UTP cable shall meet ANSI/TIA-568.2-E and IEC 61156-5Category 6 component standards. The conductors shall be 24 AWGcopper insulated with HDPE polymer. The copper conductors shall betwisted in pairs, separated by a cross divider and covered by a lowsmoke zero halogen or flame retardant PVC (CMR) jacket.

The TX6™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Yellow jacket. Packaged 1000 ft./305m in an easy payout carton.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

Category 6 cable shall meet ANSI/TIA-568-2.E Category 6 component Standard. The conductors shall be 22 AWG construction with PE insulation. The copper conductors shall be twisted in pairs, separated by cross divider, and covered by a flame-retardant (CMR) PVC jacket. Provides less voltage drop, increased current carrying capacity and reduced heat generation for PoE applications. The cable shall exceed the 100-meter distance for security, ICT, building automation, and IoT applications. Black

Category 6 cable shall meet ANSI/TIA-568-2.E Category 6 component Standard. The conductors shall be 22 AWG construction with PE insulation. The copper conductors shall be twisted in pairs, separated by cross divider, and covered by a flame-retardant (CMR) PVC jacket. Provides less voltage drop, increased current carrying capacity and reduced heat generation for PoE applications. The cable shall exceed the 100-meter distance for security, ICT, building automation, and IoT applications. Blue

Category 6 cable shall meet ANSI/TIA-568-2.E Category 6 component Standard. The conductors shall be 22 AWG construction with PE insulation. The copper conductors shall be twisted in pairs, separated by cross divider, and covered by a flame-retardant (CMR) PVC jacket. Provides less voltage drop, increased current carrying capacity and reduced heat generation for PoE applications. The cable shall exceed the 100-meter distance for security, ICT, building automation, and IoT applications. Green

Category 6 cable shall meet ANSI/TIA-568-2.E Category 6 component Standard. The conductors shall be 22 AWG construction with PE insulation. The copper conductors shall be twisted in pairs, separated by cross divider, and covered by a flame-retardant (CMR) PVC jacket. Provides less voltage drop, increased current carrying capacity and reduced heat generation for PoE applications. The cable shall exceed the 100-meter distance for security, ICT, building automation, and IoT applications. Intl Grey

Category 6 cable shall meet ANSI/TIA-568-2.E Category 6 component Standard. The conductors shall be 22 AWG construction with PE insulation. The copper conductors shall be twisted in pairs, separated by cross divider, and covered by a flame-retardant (CMR) PVC jacket. Provides less voltage drop, increased current carrying capacity and reduced heat generation for PoE applications. The cable shall exceed the 100-meter distance for security, ICT, building automation, and IoT applications. Orange

Category 6 cable shall meet ANSI/TIA-568-2.E Category 6 component Standard. The conductors shall be 22 AWG construction with PE insulation. The copper conductors shall be twisted in pairs, separated by cross divider, and covered by a flame-retardant (CMR) PVC jacket. Provides less voltage drop, increased current carrying capacity and reduced heat generation for PoE applications. The cable shall exceed the 100-meter distance for security, ICT, building automation, and IoT applications. Red

Category 6 cable shall meet ANSI/TIA-568-2.E Category 6 component Standard. The conductors shall be 22 AWG construction with PE insulation. The copper conductors shall be twisted in pairs, separated by cross divider, and covered by a flame-retardant (CMR) PVC jacket. Provides less voltage drop, increased current carrying capacity and reduced heat generation for PoE applications. The cable shall exceed the 100-meter distance for security, ICT, building automation, and IoT applications. Violet

Category 6 cable shall meet ANSI/TIA-568-2.E Category 6 component Standard. The conductors shall be 22 AWG construction with PE insulation. The copper conductors shall be twisted in pairs, separated by cross divider, and covered by a flame-retardant (CMR) PVC jacket. Provides less voltage drop, increased current carrying capacity and reduced heat generation for PoE applications. The cable shall exceed the 100-meter distance for security, ICT, building automation, and IoT applications. White

Category 6 cable shall meet ANSI/TIA-568-2.E Category 6 component Standard. The conductors shall be 22 AWG construction with PE insulation. The copper conductors shall be twisted in pairs, separated by cross divider, and covered by a flame-retardant (CMR) PVC jacket. Provides less voltage drop, increased current carrying capacity and reduced heat generation for PoE applications. The cable shall exceed the 100-meter distance for security, ICT, building automation, and IoT applications. Yellow

Category 6A/Class EA cable shall be constructed of 23 AWGcopper conductors with foamed PE and HDPE insulation. The copper conductors shall be twisted in pairs and separated by a tape divider. All four pairs shall be surroundedby a metallic AXT barrier tape and a flame retardant (CMR) jacket. TheAXT barrier tape shall minimize the cable diameter and suppressthe effects of alien crosstalk while retaining electromagneticinterference immunity.

Category 6A/Class EA cable shall be constructed of 23 AWGcopper conductors with foamed PE and HDPE insulation. The copper conductors shall be twisted in pairs and separated by a tape divider. All four pairs shall be surroundedby a metallic AXT barrier tape and a flame retardant (CMR) jacket. TheAXT barrier tape shall minimize the cable diameter and suppressthe effects of alien crosstalk while retaining electromagneticinterference immunity.

Category 6A/Class EA cable shall be constructed of 23 AWGcopper conductors with foamed PE and HDPE insulation. The copper conductors shall be twisted in pairs and separated by a tape divider. All four pairs shall be surroundedby a metallic AXT barrier tape and a flame retardant (CMR) jacket. TheAXT barrier tape shall minimize the cable diameter and suppressthe effects of alien crosstalk while retaining electromagneticinterference immunity.

Category 6A/Class EA cable shall be constructed of 23 AWGcopper conductors with foamed PE and HDPE insulation. The copper conductors shall be twisted in pairs and separated by a tape divider. All four pairs shall be surroundedby a metallic AXT barrier tape and a flame retardant (CMR) jacket. TheAXT barrier tape shall minimize the cable diameter and suppressthe effects of alien crosstalk while retaining electromagneticinterference immunity.

Category 6A/Class EA cable shall be constructed of 23 AWGcopper conductors with foamed PE and HDPE insulation. The copper conductors shall be twisted in pairs and separated by a tape divider. All four pairs shall be surroundedby a metallic AXT barrier tape and a flame retardant (CMR) jacket. TheAXT barrier tape shall minimize the cable diameter and suppressthe effects of alien crosstalk while retaining electromagneticinterference immunity.

Category 6A/Class EA cable shall be constructed of 23 AWGcopper conductors with foamed PE and HDPE insulation. The copper conductors shall be twisted in pairs and separated by a tape divider. All four pairs shall be surroundedby a metallic AXT barrier tape and a flame retardant (CMR) jacket. TheAXT barrier tape shall minimize the cable diameter and suppressthe effects of alien crosstalk while retaining electromagneticinterference immunity.

Category 6A/Class EA cable shall be constructed of 23 AWGcopper conductors with foamed PE and HDPE insulation. The copper conductors shall be twisted in pairs and separated by a tape divider. All four pairs shall be surroundedby a metallic AXT barrier tape and a flame retardant (CMR) jacket. TheAXT barrier tape shall minimize the cable diameter and suppressthe effects of alien crosstalk while retaining electromagneticinterference immunity.

Category 6A/Class EA cable shall be constructed of 23 AWGcopper conductors with foamed PE and HDPE insulation. The copper conductors shall be twisted in pairs and separated by a tape divider. All four pairs shall be surroundedby a metallic AXT barrier tape and a flame retardant (CMR) jacket. TheAXT barrier tape shall minimize the cable diameter and suppressthe effects of alien crosstalk while retaining electromagneticinterference immunity.

Category 6A/Class EA cable shall be constructed of 23 AWGcopper conductors with foamed PE and HDPE insulation. The copper conductors shall be twisted in pairs and separated by a tape divider. All four pairs shall be surroundedby a metallic AXT barrier tape and a flame retardant (CMR) jacket. TheAXT barrier tape shall minimize the cable diameter and suppressthe effects of alien crosstalk while retaining electromagneticinterference immunity.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame-retardant PVC (CMR) jacket.

The TX6000™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Black jacket. Packaged 1000 ft./305m in an easy payout carton.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

The TX6000™ Enhanced Cat 6 U/UTP copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are twisted in pairs and separated by a cross divider. All four pairs are surrounded by a HDPE flame-retardant jacket. The blue, riser (CMR) cable is supplied 1,000 feet (305 meters) to an easy pay-out carton.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame-retardant PVC (CMR) jacket.

The TX6000™ Enhanced Cat 6 U/UTP copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are twisted in pairs and separated by a cross divider. All four pairs are surrounded by a HDPE flame-retardant jacket. The blue, riser (CMR) cable is supplied 1,000 feet (305 meters) to an easy pay-out carton.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame-retardant PVC (CMR) jacket.

The TX6000™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Green jacket. Packaged 1000 ft./305m in an easy payout carton.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame-retardant PVC (CMR) jacket.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame-retardant PVC (CMR) jacket.

The TX6000™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Orange jacket. Packaged 1000 ft./305m on a reel in a box.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame-retardant PVC (CMR) jacket.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame-retardant PVC (CMR) jacket.

The TX6000™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Violet jacket. Packaged 1000 ft./305m on a reel in a box.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

The TX6000™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), White jacket. Packaged 1000 ft./305m in an easy payout carton.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame-retardant PVC (CMR) jacket.

The TX6000™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), White jacket. Packaged 1000 ft./305m on a reel in a box.

The TX6000™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), White jacket. Packaged 1000 ft./305m in an easy payout carton.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

Category 6 cable shall exceed IEC 61156-5 and ANSI/TIA-568.2-ECategory 6 component standards. The conductors shall be 23 AWGconstruction with HDPE insulation. The copper conductors shall betwisted in pairs, with all four pairs separated by a cross-divider andcovered by a flame-retardant PVC (CMR) jacket.

The TX6000™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Yellow jacket. Packaged 1000 ft./305m on a reel in a box.

The TX6000™ Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Yellow jacket. Packaged 1000 ft./305m in an easy payout carton.

Category 6 cable shall meet ANSI/TIA-568.2-E Category 6 component standard. The conductors shall be 24 AWG construction with HDPE insulation. The copper conductors shall be twisted in pairs and covered by a low smoke, flame-retardant PVC (CMR) jacket.

The TX6A™ Vari-MaTriX Cat 6A U/UTP LSZH copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs, separated by a cross divider. All four pairs shall be surrounded by a metallic Vari-MaTriX tape cut into segments of varying length and covered by a HDPE flame retardant (LSZH), Blue jacket. Packaged 1000 ft./305m on a reel.

Copper Cable, Cat 6A, Vari-MaTriX, 4-Pair, 23 AWG, UTP, LSZH, Euroclass Dca, Intl. Gray, 1000ft/305m

The TX6A™ Vari-MaTriX Cat 6A U/UTP LSZH copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs, separated by a cross divider. All four pairs shall be surrounded by a metallic Vari-MaTriX tape cut into segments of varying length and covered by a HDPE flame retardant (LSZH), White jacket. Packaged 1000 ft./305m on a reel.

The TX5500™ Cat 5e U/UTP LSZH copper cable is constructed of 24 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs. All four pairs shall be covered by a flame retardant HDPE (LSZH), Blue jacket. Packaged 1000 ft./305m on a reel.

The TX5500™ Cat 5e U/UTP LSZH copper cable is constructed of 24 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs. All four pairs shall be covered by a flame retardant HDPE (LSZH), White jacket. Packaged 1000 ft./305m on a reel.

The TX6000™ Cat 6 U/UTP LSZH copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant HDPE (LSZH), Blue jacket. Packaged 1000 ft./305m on a reel.

The TX6000™ Category 6 unshielded U/UTP LSZH Copper Cable is constructed of 23 AWG solid copper conductors insulated with polyethylene. The copper conductors are twisted in pairs, separated by a cross-divider and covered by a low smoke zero halogen (LSZH) jacket. The white cable is supplied 305m (1000 ft.) on a reel.

Class 4 Copper Cable shall be UL listed and compliant with UL 1400-2 for Class 4 cabling. It shall be a component of an end-to-end Class 4 Fault Managed Power System (FMPS) that efficiently and safely carries significant power at higher voltages over long distances . The conductors shall be 16/7 AWG stranded tinned copper insulated with PVC. The copper conductors shall be twisted in pairs and covered by a sunlight resistant PVC (CMR) jacket for indoor/outdoor locations.

Class 4 Copper Cable shall be UL listed and compliant with UL 1400-2 for Class 4 cabling. It shall be a component of an end-to-end Class 4 Fault Managed Power System (FMPS) that efficiently and safely carries significant power at higher voltages over long distances. The conductors shall be 16/7 AWG stranded tinned copper insulated with PVC. The copper conductors shall be twisted in pairs and covered by a sunlight resistant PVC (CMR) jacket for indoor/outdoor locations.

Class 4 Copper Cable shall be UL listed and compliant with UL 1400-2 for Class 4 cabling. It shall be a component of an end-to-end Class 4 Fault Managed Power System (FMPS) that efficiently and safely carries significant power at higher voltages over long distances. The conductors shall be 16/19 AWG stranded copper insulated with polyvinyl chloride. The copper conductors shall be twisted in pairs and covered by a flame retardant (CMP) PVC jacket.

Class 4 Copper Cable shall be UL listed and compliant with UL 1400-2 for Class 4 cabling. It shall be a component of an end-to-end Class 4 Fault Managed Power System (FMPS) that efficiently and safely carries significant power at higher voltages over long distances. The conductors shall be 16/19 AWG stranded copper insulated with polyvinyl chloride. The copper conductors shall be twisted in pairs and covered by a flame retardant (CMP) PVC jacket.

Class 4 Copper Cable shall be UL listed and compliant with UL 1400-2 for Class 4 cabling. It shall be a component of an end-to-end Class 4 Fault Managed Power System (FMPS) that efficiently and safely carries significant power at higher voltages over long distances. The conductors shall be 16/19 AWG stranded copper insulated with polyvinyl chloride. The copper conductors shall be twisted in pairs and covered by a flame retardant (CMP) PVC jacket.

Class 4 Copper Cable shall be UL listed and compliant with UL 1400-2 for Class 4 cabling. It shall be a component of an end-to-end Class 4 Fault Managed Power System (FMPS) that efficiently and safely carries significant power at higher voltages over long distances. The conductors shall be 18/19 AWG stranded copper insulated with polyvinyl chloride. The copper conductors shall be twisted in pairs and covered by a flame retardant (CMP) PVC jacket.

Class 4 Copper Cable shall be UL listed and compliant with UL 1400-2 for Class 4 cabling. It shall be a component of an end-to-end Class 4 Fault Managed Power System (FMPS) that efficiently and safely carries significant power at higher voltages over long distances. The conductors shall be 18/19 AWG stranded copper insulated with polyvinyl chloride. The copper conductors shall be twisted in pairs and covered by a flame retardant (CMP) PVC jacket.

Class 4 Copper Cable shall be UL listed and compliant with UL 1400-2 for Class 4 cabling. It shall be a component of an end-to-end Class 4 Fault Managed Power System (FMPS) that efficiently and safely carries significant power at higher voltages over long distances. The conductors shall be 18/19 AWG stranded copper insulated with polyvinyl chloride. The copper conductors shall be twisted in pairs and covered by a flame retardant (CMP) PVC jacket.

Class 4 Copper Cable shall be UL listed and compliant with UL 1400-2 for Class 4 cabling. It shall be a component of an end-to-end Class 4 Fault Managed Power System (FMPS) that efficiently and safely carries significant power at higher voltages over long distances. The conductors shall be 16/19 AWG stranded copper insulated with polyvinyl chloride. The copper conductors shall be twisted in pairs and covered by a flame retardant (CMP) PVC jacket.

Class 4 Copper Cable, Fault Managed Power Systems, 3-Pair, 16/19 AWG, Unshielded, CMP, CL4P, Black, 2000ft/610m reel

Class 4 Copper Cable shall be UL listed and compliant with UL 1400-2 for Class 4 cabling. It shall be a component of an end-to-end Class 4 Fault Managed Power System (FMPS) that efficiently and safely carries significant power at higher voltages over long distances. The conductors shall be 16/19 AWG stranded copper insulated with polyvinyl chloride. The copper conductors shall be twisted in pairs and covered by a flame retardant (CMP) PVC jacket.

Class 4 Copper Cable, Fault Managed Power Systems, 3-Pair, 16/19 AWG, Unshielded, CMP, CL4P, Blue, 2000ft/610m reel

Class 4 Copper Cable, Fault Managed Power Systems, 3-Pair, 16/19 AWG, Unshielded, CMP, CL4P, Green, 2000ft/610m reel

Class 4 Copper Cable, Fault Managed Power Systems, 3-Pair, 16/19 AWG, Unshielded, CMP, CL4P, International Gray, 2000ft/610m reel

Class 4 Copper Cable, Fault Managed Power Systems, 3-Pair, 16/19 AWG, Unshielded, CMP, CL4P, Red, 2000ft/610m reel

Class 4 Copper Cable, Fault Managed Power Systems, 3-Pair, 16/19 AWG, Unshielded, CMP, CL4P, Violet, 2000ft/610m reel

Class 4 Copper Cable shall be UL listed and compliant with UL 1400-2 for Class 4 cabling. It shall be a component of an end-to-end Class 4 Fault Managed Power System (FMPS) that efficiently and safely carries significant power at higher voltages over long distances. The conductors shall be 16/19 AWG stranded copper insulated with polyvinyl chloride. The copper conductors shall be twisted in pairs and covered by a flame retardant (CMP) PVC jacket.

Class 4 Copper Cable, Fault Managed Power Systems, 3-Pair, 16/19 AWG, Unshielded, CMP, CL4P, White, 2000ft/610m reel

Class 4 Copper Cable, Fault Managed Power Systems, 3-Pair, 16/19 AWG, Unshielded, CMP, CL4P, Yellow, 2000ft/610m reel

Class 4 Copper Cable shall be UL listed and compliant with UL 1400-2 for Class 4 cabling. It shall be a component of an end-to-end Class 4 Fault Managed Power System (FMPS) that efficiently and safely carries significant power at higher voltages over long distances. The conductors shall be 18/19 AWG stranded copper insulated with polyvinyl chloride. The copper conductors shall be twisted in pairs and covered by a flame retardant (CMP) PVC jacket.

Class 4 Copper Cable shall be UL listed and compliant with UL 1400-2 for Class 4 cabling. It shall be a component of an end-to-end Class 4 Fault Managed Power System (FMPS) that efficiently and safely carries significant power at higher voltages over long distances. The conductors shall be 18/19 AWG stranded copper insulated with polyvinyl chloride. The copper conductors shall be twisted in pairs and covered by a flame retardant (CMP) PVC jacket.

Class 4 Copper Cable shall be UL listed and compliant with UL 1400-2 for Class 4 cabling. It shall be a component of an end-to-end Class 4 Fault Managed Power System (FMPS) that efficiently and safely carries significant power at higher voltages over long distances. The conductors shall be 18/19 AWG stranded copper insulated with polyvinyl chloride. The copper conductors shall be twisted in pairs and covered by a flame retardant (CMP) PVC jacket.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end.