Panduit cable tie gun

3mm Extended Blade Guard for GTH-E and GS4H-E Tools

3mm Extended Blade Guard for GTS-E, GS2B-E and PTS Tools

The BT2HT Hand Operated Installation tool tensions and cuts strapping. Designed with a multi-position rear handle that provides flexibility and easy removal of excess strap. Used with Pan-Steel Strapping.

Installation Tool for use with Panduit® Buckle Strap Cleats. For use with MS75 Buckles. Tensions, Cuts Strapping and Secures the Buckle Tab. Lever Cut Off.

The BT75SDT hand-operated installation tool tensions the strap using a screw drive mechanism, providing high tension while reducing operator fatigue. The strapping side entry allows for easy strap insertion, streamlining installation.

Cut-off accessory. Use this accessory with GS4MT tool to cut MBH or MBS continuous banding. Accessory drops in place for use.

The Tak-Ty® Cable Organizing Kit contains a jacket cover with hook and loop fastener and two inserts. The two inserts handle multiple network cable diameters. The fluorescent green insert handles cable outer diameter ranging from 0.180 inches to 0.248 inches (4.57mm to 6.30mm). The fluorescent yellow insert handles cable outer diameter ranging from 0.230 inches to 0.310 inches (5.84mm to 7.87mm).

Cable Tie Gun Tool Holster - Designed to hold PANDUIT® GTS-E, GTH-E, GS2B-E, GS4H-E, GS4EH-E, and PTS cable tie installation tools. Can also be used with stainless steel tie tool, GS4MT.

Panduit offers the most preferred hand-operated tools in the industry. The GS2B-E Ergonomic Cable Tie Hand Tool is easy to operate and has tool-controlled tension that provides a flush cut-off and speeds up installation to lower installed cost. Promotes worker safety, reduces downtime, and increases productivity. For Subminiature, Miniature, Intermediate, and Standard Cross Section Cable Ties. Black trigger handle and selector knob with light gray metal housing. Weight, 13.55 ounces (385 grams).

Panduit offers the most preferred hand-operated tools in the industry. The GS4H-E Ergonomic Cable Tie Hand Tool is easy to operate and has tool-controlled tension that provides a flush cut-off and speeds up installation to lower installed cost. Promotes worker safety, reduces downtime, and increases productivity. For Light-Heavy, Heavy and Extra-Heavy Cross Section Cable Ties. Blue trigger handle and selector knob with light gray metal housing. Weight, 16 ounces (454 grams).

Panduit offers the most preferred hand-operated tools in the industry. The GS4H-E Ergonomic Cable Tie Hand Tool is easy to operate and has tool-controlled tension that provides a flush cut-off and speeds up installation to lower installed cost. Promotes worker safety, reduces downtime, and increases productivity. For Standard. Heavy-Standard, Light-Heavy, and Heavy Cross Section Cable Ties. Red trigger handle and selector knob with light gray metal housing. Weight, 16 ounces (454 grams).

The GS4MT-E Stainless Steel Cable Tie hand tool provides higher performance and reliability. With the state-of-the-art ergonomic features which provide lower grip force lowering the risk of motion injuries to installers. The easy to read tension settings improves accuracy while increasing dependability. The tension setting knob is easy to read and design in ½ stop increments to improve efficiency and a long, narrow nose to improve access to small, confined areas.

Panduit offers the most preferred hand-operated tools in the industry. The GTH-E Ergonomic Cable Tie Hand Tool is easy to operate and has tool-controlled tension that provides a flush cut-off and speeds up installation to lower installed cost. Promotes worker safety, reduces downtime, and increases productivity. For Standard, Heavy-Standard, Light-Heavy, and Heavy Cross Section Cable Ties. Red trigger handle and selector knob with dark gray plastic housing. Weight, 11.9 ounces (337.1 grams).

Panduit offers the most preferred hand-operated tools in the industry. The GTS-E Ergonomic Cable Tie Hand Tool is easy to operate and has tool-controlled tension that provides a flush cut-off and speeds up installation to lower installed cost. Promotes worker safety, reduces downtime, and increases productivity. For Subminiature, Miniature, Intermediate, and Standard Cross Section Cable Ties. Black trigger handle and selector knob with dark gray plastic housing. Weight, 10.4 ounces (294.5 g).

Installation tool for use with the following stainless steel cross section ties: Type MLT: Standard, light-heavy, and heavyType MLTFC: Standard and heavyType MLTC, MLT-LPAL, and MLTD: HeavyUsed with custom length banding cross sections: Type MB: Standard and heavyType MBC: Heavy

Blade Replacement Kit for GS2B and PPTS (all versions).

Blade Replacement Kit for GS4H Series (3-screw blade guard only).

Replacement cutter blade for GS4MT.

Replacement tension gripper for GS4MT.

KGS4-EBLD Blade Replacement Kit for GS4EH-E tool

Screw Type Tension Lockout Kit for GS2B-E, GS4H-E, GS4EH-E and GS4MT-E Cable Tie Tools

Blade Replacement Kit (Compatible with GTH-E and GS4H-E Tools).

Wide Blade Replacement Kit (Compatible with GTH-E tools made after December 2018)

Snap-in Type Tension Lockout Kit for GTS-E, GTH-E , GS2B-E, GS4H-E, GS4EH-E and GS4MT-E Cable Tie Tools

Screw Type Tension Lockout Kit for GTS-E and GTH-E Cable Tie Tool

Blade Replacement Kit for GTS/PTS.

Change over kits allow for installation of heavy cross section MRT and MRS style ties, and MRT double wrapped style ties in MTRTH tools.

Blade Replacement Kit for PPTEH.

Gripper Replacement Kit for PPTEH

Replacement blade kit for PPTMT.

Replacement gripper kit for PPTMT.

Blade Replacement Kit for PTH.

Gripper Replacement Kit for PPTS

Tension Locking Kit used with PTS and PTH tools. Cover to prevent changing tension settings.

Replacement cutter blade for RT2HT and BT2HT.

Replacement cutter handle for RT2HT and BT2HT.

Installation tool for use with the following stainless steel cross section retained tension ties: Type MRT and MRS: Heavy and double wrapped heavy

Installation tool for use with the following stainless steel cross section retained tension ties: Type MRT and MRS: Standard and light-heavyType MRT and MRS: Double wrapped standard and light-heavy

Panduit’s Automatic Cable Tie Installation Systems offer multiple sizes of ergonomic, lightweight tool heads. The PAT1.5M4.0 reduces operator fatigue and repetitive motion injuries. It can be operated either right or left-handed and has a cable tie tip collector bin. Housing is made of plastic, is black in color and is designed to be used with PLT1.5M-XMR Panduit reel-fed cable ties. Use with PDM4.0 and PHM-series transfer hose.

Panduit’s Automatic Cable Tie Installation Systems offer multiple sizes of ergonomic, lightweight tool heads. The PAT1M4.0 reduces operator fatigue and repetitive motion injuries. It can be operated either right or left-handed and has a cable tie tip collector bin. Housing is made of plastic, is black in color and is designed to be used with PLT1M-XMR Panduit reel-fed cable ties. Use with PDM4.0 and PHM-series transfer hose.

The PBTMT Battery Powered Installation Tool provides an ergonomic and compact, lightweight body, reducing operator fatigue. The automatic flush cut off enhances productivity with the easy one-hand installation. The cable tie side entry allows for quick side entry of the cable tie into the tool for increased speed installation. The 360-degree rotating head allows access to confined spaces, and the controlled tension mechanism provides consistent installations.

The PBTMT-HEAD is a replacement part designed specifically for the PBTMT and PBTMT/E battery operated power tools.

Battery Powered Installation tool for use with the following stainless steel cross section ties: Type MLT and MLTFC: Heavy, extra-heavy, and super-heavy Type MLTC: Heavy Type MLTDH: Extra-Heavy and super-heavy Used with custom length banding cross sections: Type MB and MBC: Heavy, extra-heavy, and super-heavy2 – 12 volt Lithium-Ion batteries and 220 volt, 50 Hz charger included.

Panduit PDM4.0 stationary dispenser with electronic display. When paired with one of Panduit’s ergonomic and lightweight tool heads operator fatigue is reduced as well as repetitive motion injuries. System operates on 65 psig (minimum) non-lubricated filtered air, and uses a line voltage of 100 / 115 / 230 (50/60 hertz). Use with PAT1M4.0/PAT1.5M4.0 tool heads and a PHM-series transfer hose.

Panduit PHM2 PAT System Transfer Hoses transfer reel-fed cable ties and signal from dispenser to tool head. The hoses are designed for easy attachment and to provide a reliable and secure connection. Compatible with Panduit PAT1M, PAT1.5M, PAT1M-BT, and PAT1.5M-BT. Hose is 6.5’ (2m) in length, black in color and comes 1 to a package.

Panduit PHM3 PAT System Transfer Hoses transfer reel-fed cable ties and signal from dispenser to tool head. The hoses are designed for easy attachment and to provide a reliable and secure connection. Compatible with Panduit PAT1M, PAT1.5M, PAT1M-BT, and PAT1.5M-BT. Hose is 10.0’ (3m) in length, black in color and comes 1 to a package.

Regulates air flow to all model PAT dispensers. Filter/regulator for PTS, PPTS,PTH, PPTEH and PPTMT Installation Tools, .5 micron element, regulated range 3-100 psig, features .13" (3.3mm) NPT female output port (to hose PPH10) and .25" (6.4mm) male quick disconnect to source air line.

10.0' (3m) hose assembly (regulator to tool) for PTS, PPTS, PTH, PPTEH and PTMT Installation Tools; includes a .13" (3.3mm) NPT male connector (to regulator) and .13" (3.3mm) female quick disconnect (to tool).

Panduit offers the most preferred hand-operated tools in the industry. The PPTEH Pneumatic Cable Tie Hand Tool has an ergonomic design that promotes worker safety, reduces downtime, and increases productivity. For use with light-heavy, heavy and extra heavy cross section cable ties. Blue trigger handle with gray metal housing. Weight is 52 ounces (1474 g) and is sold individually.

Pneumatic Installation tool for use with the following stainless steel cross section ties: Type MLT: Standard, light-heavy, and heavyType MLTFC: Standard and heavyType MLTC and MLTDH: HeavyUsed with custom length banding cross sections: Type MB: Standard and heavyType MBC: HeavyAutomatically tensions and cuts off tie when predetermined tension is reached, providing more reliable and consistent installations. Ideal for high production applications.

Panduit offers the most preferred hand-operated tools in the industry. The PPTS Pneumatic Cable Tie Hand Tool has an ergonomic design that promotes worker safety, reduces downtime, and increases productivity. For use with miniature, intermediate and standard cross section cable ties. Black trigger handle with gray metal housing. Weight is 15 ounces (427 g) and is sold individually.

Panduit offers the most preferred hand-operated tools in the industry. The PTH Pneumatic Cable Tie Hand Tool has an ergonomic design that promotes worker safety, reduces downtime, and increases productivity. For use with standard, heavy-standard, light-heavy and heavy cross section cable ties. Red trigger handle with gray impact resistant resin housing. Weight is 32 ounces (907 g) and is sold individually.

Panduit offers the most preferred hand-operated tools in the industry. The PTS Pneumatic Cable Tie Hand Tool has an ergonomic design that promotes worker safety, reduces downtime, and increases productivity. For use with subminiature, miniature, intermediate and standard cross section cable ties. Black trigger handle with gray impact resistant resin housing. Weight is 17.3 ounces (490 g) and is sold individually.

Narrow nose installation tool for use with the following stainless steel cross section ties: Type MLT, MLTFC, and MLTD: Extra-heavy and super-heavyUsed with custom length banding cross section: Type MB and MBC: Extra-heavy and super-heavyWidth of tool nose 1.06" (27.0mm).

The ST2MT Stainless Steel Cable Tie Tool is an easy and lightweight option for stainless steel cable tie installation. This tool has a cable tie side entry for immediate positioning of the cable tie and tool and can be operated with one hand, making this solution an easy to operate option for the installer.

The cable tie tool in blue (handles) installs light-heavy, heavy, and extra-heavy cross-section cable ties. It features durable all-steel construction with comfortable rubber handles. Weighing 9 oz. (256g), it is sold individually.

Installation tool for use with HTMLT. Manual tensioning controlled by operator. This tool has a built in cutting lever for clean recessed cutoff.

The cable tie tool in red installs standard, heavy-standard, light-heavy, and heavy cross-section cable ties. It is an inexpensive, maintenance-free, all-purpose tool with an ergonomic handle design and short handle span. It also features a top-loading feature for right- or left-handed users. Weighing 2.5 oz. (71g), it is sold individually.

Panduit STHV Cable Tie Hand Tool is made with durable all-steel construction and features a “travel stop” that helps prevent pinched fingers. Tool is light gray and black, installs light-heavy and heavy cross section cable ties. Weighs 13oz (367g) and is sold individually.

The cable tie tool in black installs miniature, intermediate, and standard cross-section cable ties. This inexpensive, maintenance-free, all-purpose tool has an ergonomic handle design and short handle span. It also features a top-loading feature for right- or left-handed users. Weighing 2.5 oz. (71g), it is sold individually.

Tool tension locking kit for GS2B, GS2BL, GS4H, GS4EH, GS4H121W, GS4MT, PPTS, PPTEH and PPTMT installation tools.